Harman-Kardon AVR 510 owner manual Full-OSD Time-Out Adjustment

Page 34

Advanced Features

the AVR 510 is turned off. Once the unit is turned off, the semi-OSD displays will remain activated, even if they were switched off for the previous listening session.

To change the length of time that the semi-OSD displays remain on the screen, go to the ADVANCED SELECT menu as outlined earlier, and press the ⁄/¤ buttons n as needed, until the on-screen › cursor is next to the SEMI OSD TIME OUT line. Next, press the ‹/› buttons o 31 until the desired time in seconds is displayed. Note that unlike most of the other options in this menu, this is a permanent setting change, and the time-out entry will remain in effect until it is changed, even when the unit is turned off.

If you wish to make other adjustments, press the ⁄/¤ buttons n until the on-screen › cursor is next to the desired setting or the RETURN TO MENU line and press the Set button p. If you have no other adjustments to make, press the OSD button v to exit the menu system.

Full-OSD Time-Out Adjustment

The FULL OSD menu system is used to sim- plify the setup and adjustment of the AVR 510, using a series of on-screen menus. The factory default setting for these menus leaves them on the screen for 20 seconds after a period of inactivity before they disappear from the screen (Time-Out). Time-Out is a safety measure to prevent image retention of the menu text in your monitor or projector, which might happen if it were left on indefinitely. However, some viewers may prefer a slightly longer or shorter period before the Time Out display.

To change the Full-OSD Time-Out, you will need to make an adjustment in the ADVANCED SELECT menu (Figure 9). To start the adjustment, press the OSD button v to bring the MASTER MENU to the screen. Press the ¤ button n six times, until the on-screen

¤cursor is next to the ADVANCED line. Press the Set button p to enter the ADVANCED SELECT Menu (Figure 9).

At the ADVANCED SELECT menu (Figure 9) make certain that the on-screen › cursor is next to the FULL OSD TIME OUT line by pressing the ⁄/¤ buttons n as needed. Next, press the ‹/› buttons o/ 31 until the desired time is displayed in seconds. Note that unlike most of the other options in

this menu, this is a permanent setting change, and the Time-Out entry will remain in effect until it is changed, even if the unit is turned off.

If you wish to make other adjustments, press the ⁄/¤ buttons n until the on-screen › cursor is next to the desired setting or the RETURN TO MENU line and press the Set button p. If you have no other adjustments to make, press the OSD button v to exit the menu system.

34ADVANCED FEATURES

Page 33 Page 35
Image 34
Page 33 Page 35
Contents AVR 510 Audio/ Video Receiver AVR 510 Audio/ Video Receiver While complex digital systems are hard Description and FeaturesIntroduction Multiple Digital Inputs and OutputsImportant Safety Information Safety InformationUnpacking Front Panel Controls Set Button  Input Indicators Ò Delay# Digital Optical 3 Input Preset Stations Selector Press this Main Information Display Û into the AVR 510’s memoryNight Mode Indicator This indicator Front Panel Information DisplayFor more information on the Channel Indicators Rear Panel Connections Rear Panel Connections Main Remote Control Functions AVR SelectorMain Remote Control Functions Dialog center channel intelligibility at low volume levelsTo select the component connected to ` Preset Up/Down When the tuner is37 6-Ch. Direct Input Press this button Channel Direct Input ª as the sourceZone II Remote Control Functions Between the AM and FM bandsAudio Equipment Connections Installation and ConnectionsSystem Installation Connect the analog output of a CD player to the CD inputsVideo Connection Notes System and Power ConnectionsVideo Equipment Connections Multiroom IR LinkAC Power Connections External Audio Power Amplifier ConnectionsExternal Audio Decoder Connection Speaker Placement System ConfigurationSpeaker Selection and Placement System SetupUsing the On-Screen Display Plug the AC Power Cord into an unswitched AC outletSetting the System Configuration Memories Surround Setup Input SetupOr the ⁄/¤ buttons n on the remote Delay Settings Buttons on the remote will take you to the delay settingsNight Mode Settings Speaker Setup SurroundIf no subwoofer is connected to Output Level AdjustmentInformation Display Y Manual Output Level Adjustment Using EzSetAVR 510 off using the Main Power Switch Additional Input Adjustments Basic Operation OperationSource Selection Surround Mode Chart Selecting a Digital Source Surround Mode SelectionDigital Audio Playback Dolby DigitalAddition to the bitstream indicators, Digital Status IndicatorsNight Mode PCM Audio Playback Tuner OperationMP3 Audio Playback Recalling Preset Stations Output Level Trim AdjustmentPreset Tuning Volume Control Ó 34 îMemory Backup Channel Direct InputSemi-OSD Settings Advanced FeaturesTurn-On Volume Level Display Brightness AVR 510’s Main Information DisplayFull-OSD Time-Out Adjustment Multiroom Operation Multiroom SetupInstallation Multiroom OperationProgramming the Remote Programming the RemoteErasing Learned Codes Learning CodesMacro Programming Press the AVR Selector f Erasing Macro CommandsMode Selector/Channel Down button k Programmed Device FunctionsChannel Control Punch-Through Volume Punch-ThroughTransport Control Punch-Through Resetting the Remote Memory Reassigning Device Control SelectorsFunction List Tune Up Preset UpPreset Down DirectSetup Code Table TV 175 176 084001 011 030 033 042 044 100 107 115 154 160 167 168 021 031Setup Code Table VCR 147 166 159057 058 070 074 078 086 114 125 150 167 172Setup Code Table CD 015 075 109 119 158 183 204 037 038 045 046 171 175 202 203020 036 056 057 064 065 089 090 091 092 096 099 104 212 039 051 138 149 209Setup Code Table DVD Setup Code Table TapeSetup Code Table Audio Setup Code NumberSetup Code Table SAT Setup Code Table CBL 055 056 061 099 100 101 207 111 112 213053 214 063 115Information from nonencoded programs Troubleshooting GuideProcessor Reset Lights, motors or other electrical appliancesPage Technical Specifications Harman Kardon, Incorporated Part No. J90200012000

AVR 510 specifications

The Harman-Kardon AVR 510 is a high-performance AV receiver that has garnered attention for its impressive sound quality and versatile functionality. As part of Harman Kardon's esteemed line of audio equipment, the AVR 510 is designed to elevate the home entertainment experience, making it a favored choice for audiophiles and casual listeners alike.

One of the standout features of the AVR 510 is its powerful amplification system. With a robust output of up to 75 watts per channel, the receiver can drive a variety of speaker configurations, ensuring clear and dynamic sound across the frequency spectrum. This capability allows users to enjoy an immersive audio experience whether they are watching movies, playing video games, or listening to music.

The AVR 510 also supports multiple surround sound formats, including Dolby Digital and DTS. This enables users to experience rich, cinematic soundscapes that enhance the overall viewing experience. The inclusion of advanced processing technologies ensures that audio playback is accurate, highlighting the nuances in sound that make movies and music come alive.

Connectivity is another key aspect of the AVR 510, featuring a range of input options to accommodate various devices. With several HDMI inputs, digital optical and coaxial inputs, as well as analog audio connections, this receiver can seamlessly integrate with Blu-ray players, gaming consoles, and streaming devices. It also includes an AM/FM tuner, allowing users to enjoy their favorite radio stations.

The user interface of the AVR 510 is designed for convenience, featuring an intuitive on-screen menu that guides users through setup and operation. The inclusion of a remote control further enhances usability, allowing for easy access to settings and adjustments from across the room.

Additionally, the AVR 510 is equipped with Harman Kardon's proprietary technologies, such as Halosonic processing, which optimizes sound quality for various listening environments. This ensures that users can enjoy consistent audio performance regardless of their room's acoustics.

In conclusion, the Harman-Kardon AVR 510 stands out as a versatile and powerful AV receiver that enhances home entertainment through its detailed sound reproduction, robust connectivity options, and user-friendly design. Whether for serious movie watching or casual music listening, the AVR 510 delivers an exceptional audio experience that is hard to match.
Top Page Image Contents