Harman-Kardon AVR 510 External Audio Power Amplifier Connections, AC Power Connections

Page 17

Installation and Connections

IMPORTANT NOTE: Any cables run inside walls should be CL3/FT4-rated or carry any other certi- fication that is required by the NEC or state and local building and electrical codes. To avoid inter- ference, audio and speaker cables should not be parallel to, or run in the same conduits or path with, AC cables. If you have any questions about multiroom wiring, consult your dealer, custom installer or low-voltage electrical contractor.

External Audio Power Amplifier Connections

If desired, the AVR 510 may be connected to optional, external audio power amplifiers or used with equalizers or speaker systems that require connection between the preamp and amplifier sections of a receiver.

To make these connections, remove the jumpers that connect the Preamp Out jacks ¤ and Amplifier In jacks ⁄ for the channels to be used with external devices. Store the jumpers in a safe place so that the AVR 510 may be used in its normal mode at a future date, if desired.

When an external amplifier is used, connect the Preamp Out jacks ¤ to the inputs on the amplifier. When an equalizer or speaker proces- sor is used, connect the Preamp Out jacks ¤ to the inputs of the processor, and connect the outputs of the processor back to the Amplifier In jacks ⁄ on the AVR 510. Note that when external amplifiers or devices are used, the vol- ume control is still controlled by the AVR 510, although additional volume controls on the external device may impact the volume settings and output levels from the AVR 510.

External Audio Decoder Connection

To provide for ultimate flexibility, the AVR 510 may be used in conjunction with optional, external decoders for digital audio systems other than the AVR 510’s own built-in Dolby Digital and DTS decoding system or with DVD players using the DVD Audio Format. If an external decoder is used, connect the output jacks of the decoder to the 6-Channel Direct Inputs ª, making sure to match channels.

These jacks may also be used for connections to devices such as DVD players or High Definition Television (HDTV) sets or decoders that feature built-in digital surround decoders. Although the digital decoding system in the AVR 510 will typi- cally provide audio performance that is superior to other decoders, you may use these jacks to provide an additional 6-channel input for connec- tion to a DVD player or HDTV set with a built-in decoder and discrete 6-channel analog outputs.

AC Power Connections

This unit is equipped with two accessory AC outlets. They may be used to power accessory devices, but they should not be used with high- current draw equipment such as power ampli- fiers. The total power draw to each outlet may not exceed 100 watts.

The Switched AC Accessory Outlet fl will receive power only when the unit is on. This is recommended for devices that have no power switch or a mechanical power switch that may be left in the “ON” position.

NOTE: Many audio and video products go into a Standby mode when they are used with switched outlets, and cannot be fully turned on using the outlet alone without a remote control command.

The Unswitched AC Accessory Outlet ‡ will receive power as long as the unit is plugged into a powered AC outlet.

Finally, when all connections are complete, plug the power cord into a nonswitched 110-volt AC wall outlet. You’re almost ready to enjoy the AVR 510!

17INSTALLATION AND CONNECTIONS

Page 16 Page 18
Image 17
Page 16 Page 18
Contents AVR 510 Audio/ Video Receiver AVR 510 Audio/ Video Receiver Introduction Description and FeaturesWhile complex digital systems are hard Multiple Digital Inputs and OutputsUnpacking Safety InformationImportant Safety Information # Digital Optical 3 Input Set Button  Input Indicators Ò DelayFront Panel Controls Main Information Display Û into the AVR 510’s memory Preset Stations Selector Press thisFront Panel Information Display Night Mode Indicator This indicatorFor more information on the Channel Indicators Rear Panel Connections Rear Panel Connections AVR Selector Main Remote Control FunctionsDialog center channel intelligibility at low volume levels Main Remote Control Functions37 6-Ch. Direct Input Press this button ` Preset Up/Down When the tuner isTo select the component connected to Channel Direct Input ª as the sourceBetween the AM and FM bands Zone II Remote Control FunctionsSystem Installation Installation and ConnectionsAudio Equipment Connections Connect the analog output of a CD player to the CD inputsVideo Equipment Connections System and Power ConnectionsVideo Connection Notes Multiroom IR LinkExternal Audio Decoder Connection External Audio Power Amplifier ConnectionsAC Power Connections Speaker Selection and Placement System ConfigurationSpeaker Placement System SetupSetting the System Configuration Memories Plug the AC Power Cord into an unswitched AC outletUsing the On-Screen Display Or the ⁄/¤ buttons n on the remote Input SetupSurround Setup Night Mode Settings Buttons on the remote will take you to the delay settingsDelay Settings Surround Speaker SetupInformation Display Y Output Level AdjustmentIf no subwoofer is connected to AVR 510 off using the Main Power Switch Using EzSetManual Output Level Adjustment Additional Input Adjustments Source Selection OperationBasic Operation Surround Mode Chart Digital Audio Playback Surround Mode SelectionSelecting a Digital Source Dolby DigitalNight Mode Digital Status IndicatorsAddition to the bitstream indicators, MP3 Audio Playback Tuner OperationPCM Audio Playback Preset Tuning Output Level Trim AdjustmentRecalling Preset Stations Volume Control Ó 34 îChannel Direct Input Memory BackupTurn-On Volume Level Advanced FeaturesSemi-OSD Settings Display Brightness AVR 510’s Main Information DisplayFull-OSD Time-Out Adjustment Installation Multiroom SetupMultiroom Operation Multiroom OperationProgramming the Remote Programming the RemoteMacro Programming Learning CodesErasing Learned Codes Mode Selector/Channel Down button k Erasing Macro CommandsPress the AVR Selector f Programmed Device FunctionsTransport Control Punch-Through Volume Punch-ThroughChannel Control Punch-Through Reassigning Device Control Selectors Resetting the Remote MemoryFunction List Preset Down Preset UpTune Up DirectSetup Code Table TV 001 011 030 033 042 044 100 107 115 154 160 167 168 084175 176 021 031Setup Code Table VCR 057 058 159147 166 070 074 078 086 114 125 150 167 172Setup Code Table CD 020 036 056 057 064 065 089 090 091 092 096 099 104 212 037 038 045 046 171 175 202 203015 075 109 119 158 183 204 039 051 138 149 209Setup Code Table Audio Setup Code Table TapeSetup Code Table DVD Setup Code NumberSetup Code Table SAT Setup Code Table CBL 053 214 111 112 213055 056 061 099 100 101 207 063 115Processor Reset Troubleshooting GuideInformation from nonencoded programs Lights, motors or other electrical appliancesPage Technical Specifications Harman Kardon, Incorporated Part No. J90200012000

AVR 510 specifications

The Harman-Kardon AVR 510 is a high-performance AV receiver that has garnered attention for its impressive sound quality and versatile functionality. As part of Harman Kardon's esteemed line of audio equipment, the AVR 510 is designed to elevate the home entertainment experience, making it a favored choice for audiophiles and casual listeners alike.

One of the standout features of the AVR 510 is its powerful amplification system. With a robust output of up to 75 watts per channel, the receiver can drive a variety of speaker configurations, ensuring clear and dynamic sound across the frequency spectrum. This capability allows users to enjoy an immersive audio experience whether they are watching movies, playing video games, or listening to music.

The AVR 510 also supports multiple surround sound formats, including Dolby Digital and DTS. This enables users to experience rich, cinematic soundscapes that enhance the overall viewing experience. The inclusion of advanced processing technologies ensures that audio playback is accurate, highlighting the nuances in sound that make movies and music come alive.

Connectivity is another key aspect of the AVR 510, featuring a range of input options to accommodate various devices. With several HDMI inputs, digital optical and coaxial inputs, as well as analog audio connections, this receiver can seamlessly integrate with Blu-ray players, gaming consoles, and streaming devices. It also includes an AM/FM tuner, allowing users to enjoy their favorite radio stations.

The user interface of the AVR 510 is designed for convenience, featuring an intuitive on-screen menu that guides users through setup and operation. The inclusion of a remote control further enhances usability, allowing for easy access to settings and adjustments from across the room.

Additionally, the AVR 510 is equipped with Harman Kardon's proprietary technologies, such as Halosonic processing, which optimizes sound quality for various listening environments. This ensures that users can enjoy consistent audio performance regardless of their room's acoustics.

In conclusion, the Harman-Kardon AVR 510 stands out as a versatile and powerful AV receiver that enhances home entertainment through its detailed sound reproduction, robust connectivity options, and user-friendly design. Whether for serious movie watching or casual music listening, the AVR 510 delivers an exceptional audio experience that is hard to match.
Top Page Image Contents