Harman-Kardon AVR 510 owner manual Plug the AC Power Cord into an unswitched AC outlet

Page 19

System Configuration

1.Plug the AC Power Cord ° into an unswitched AC outlet.

2.Press the Main Power Switch 1 in until it latches and the word “OFF” on the top of the switch disappears inside the front panel. Note that the Power Indicator 3 will turn amber, indicating that the unit is in the Standby mode.

3.Remove the protective plastic film from the front-panel lens. If left in place, the film may affect the performance of your remote control.

4.Install the three supplied AAA batteries in the remote as shown. Be certain to follow the (+) and (–) polarity indicators that are on the bottom of the battery compartment.

5.Turn the AVR 510 on either by pressing the System Power Control 2 on the front panel, or via the remote by pressing the AVR Selector for any of the Input Selectors egon the remote. The Power Indicator 3 will turn green to confirm that the unit is on, and the Main Information Display Û will also light.

Using the On-Screen Display

When making the following adjustments, you may find it easier to use the AVR 510’s on- screen display system. These easy-to-read dis- plays give you a clear picture of the current sta- tus of the unit and make it easy to see which speaker, delay, input or digital selection you are making.

To view the on-screen menus, make certain you have made a connection from the Video Monitor Out jack › on the rear panel to the composite or S-Video input of your TV or pro- jector. In order to view the AVR 510’s displays, the correct video source must be selected on the video display.

IMPORTANT NOTE: When viewing the displays on a projection TV, it is important that they not be left on the screen for an extended period of time. As with any video display, but particularly with projectors, constant display of a static image such as these menus or video game images may cause

the image to be permanently “burned into” the CRT. This type of damage is not covered by the AVR 510 warranty and may not be covered by the projector/TV set’s warranty.

The AVR 510 has two on-screen display modes, “Semi-OSD” and “Full-OSD.” When making configuration adjustments, it is recommended that the Full-OSD mode be used. This will place a complete status report or option listing on the screen, making it easier to view the avail- able options. The Semi-OSD mode uses one-line displays only.

Making Configuration Adjustments The full OSD system is always available by pressing the OSD button v. When this button is pressed, the MASTER MENU (Figure 1) will appear, and adjustments are made from the individual menus. The semi-OSD system is also available as a system default, although it may be turned off by using the ADVANCED SELECT menu. (See page 33.) With the semi-OSD system, you may make adjustments directly, by pressing the buttons on the front panel or remote control for the specif- ic parameter to be adjusted. For example, press the Speaker Select button 32 ı to set the speaker configuration, etc.

* M A S T E R M E N U *

I N P U T S E T U P

S U R R O U N D S E T U P

S P E A K E R S E T U P

O U T P U T A D J U S T

C H A N N E L A D J U S T

M U L T I - R O O M

A D V A N C E D

E X I T

Figure 1

Note that when the full OSD system is in use, the menu selections are not shown in the Main Information Display Û Y. When the full OSD menu system is used, OSD ON will appear in the Main Information Display Y and the OSD Indicator M will light to remind you that a video display must be used. When the semi-OSD system is used in conjunction with the discrete configuration buttons, the on- screen display will show a single line of text with the current menu selection. That selection will also be shown in the Main Information Display Y.

To use the full OSD menu system, press the OSD button v. When the menu is on the screen, press the ⁄/¤ buttons n until the on-screen › cursor is next to the item you wish

to adjust, and then press the Set button p to adjust that item. Note that the menus will remain on the screen for 20 seconds, and then they will “time-out” and disappear from the screen. The time-out may be increased to as much as 50 seconds by going to the ADVANCED SELECT menu, and changing the item titled FULL OSD TIME OUT.

Setting the System Configuration Memories

The AVR 510 features an advanced memory system that enables you to establish different configurations for the speaker configuration, digital input, surround mode, delay times, crossover frequency and output levels for each input source. This flexibility enables you to custom-tailor the way in which you listen to each source and have the AVR 510 memorize those settings. This means, for example, that you may use different output levels or trims for different sources, or set different speaker con- figurations with the resultant changes to the bass management system. Once these settings are made, they will automatically be recalled whenever you select that input.

The factory default settings for the AVR 510 have all inputs configured for an analog source, stereo as the surround mode, the front left and right speakers set to “large,” and a subwoofer connected. Before using the unit, you will prob- ably want to change the settings for most inputs so that they are properly configured to reflect the use of digital or analog inputs, the type of speakers installed and the surround mode specifics. Remember that since the

AVR 510 memorizes the settings for each input individually, you will need to make these adjustments for each input used. However, once they are made, further adjustment is only required when system components are changed.

To make this process as quick and as easy as possible, we suggest that you use the full-OSD system with the on-screen menus, and step through each input. Once you have completed the settings for the first input, many settings may be duplicated for the remaining inputs. It is also a good idea to set the configuration data in the order these items are listed in the MASTER MENU, as some settings require a specific entry in a prior menu item. Remember that once the settings are made for one input, they must be made for all other input sources in your system.

19SYSTEM CONFIGURATION

Page 18 Page 20
Image 19
Page 18 Page 20
Contents AVR 510 Audio/ Video Receiver AVR 510 Audio/ Video Receiver Multiple Digital Inputs and Outputs Description and FeaturesIntroduction While complex digital systems are hardImportant Safety Information Safety InformationUnpacking Front Panel Controls Set Button  Input Indicators Ò Delay# Digital Optical 3 Input Main Information Display Û into the AVR 510’s memory Preset Stations Selector Press thisFront Panel Information Display Night Mode Indicator This indicatorFor more information on the Channel Indicators Rear Panel Connections Rear Panel Connections AVR Selector Main Remote Control FunctionsDialog center channel intelligibility at low volume levels Main Remote Control FunctionsChannel Direct Input ª as the source ` Preset Up/Down When the tuner is37 6-Ch. Direct Input Press this button To select the component connected toBetween the AM and FM bands Zone II Remote Control FunctionsConnect the analog output of a CD player to the CD inputs Installation and ConnectionsSystem Installation Audio Equipment ConnectionsMultiroom IR Link System and Power ConnectionsVideo Equipment Connections Video Connection NotesAC Power Connections External Audio Power Amplifier ConnectionsExternal Audio Decoder Connection System Setup System ConfigurationSpeaker Selection and Placement Speaker PlacementUsing the On-Screen Display Plug the AC Power Cord into an unswitched AC outletSetting the System Configuration Memories Surround Setup Input SetupOr the ⁄/¤ buttons n on the remote Delay Settings Buttons on the remote will take you to the delay settingsNight Mode Settings Surround Speaker SetupIf no subwoofer is connected to Output Level AdjustmentInformation Display Y Manual Output Level Adjustment Using EzSetAVR 510 off using the Main Power Switch Additional Input Adjustments Basic Operation OperationSource Selection Surround Mode Chart Dolby Digital Surround Mode SelectionDigital Audio Playback Selecting a Digital SourceAddition to the bitstream indicators, Digital Status IndicatorsNight Mode PCM Audio Playback Tuner OperationMP3 Audio Playback Volume Control Ó 34 î Output Level Trim AdjustmentPreset Tuning Recalling Preset StationsChannel Direct Input Memory BackupDisplay Brightness AVR 510’s Main Information Display Advanced FeaturesTurn-On Volume Level Semi-OSD SettingsFull-OSD Time-Out Adjustment Multiroom Operation Multiroom SetupInstallation Multiroom OperationProgramming the Remote Programming the RemoteErasing Learned Codes Learning CodesMacro Programming Programmed Device Functions Erasing Macro CommandsMode Selector/Channel Down button k Press the AVR Selector fChannel Control Punch-Through Volume Punch-ThroughTransport Control Punch-Through Reassigning Device Control Selectors Resetting the Remote MemoryFunction List Direct Preset UpPreset Down Tune UpSetup Code Table TV 021 031 084001 011 030 033 042 044 100 107 115 154 160 167 168 175 176Setup Code Table VCR 070 074 078 086 114 125 150 167 172 159057 058 147 166Setup Code Table CD 039 051 138 149 209 037 038 045 046 171 175 202 203020 036 056 057 064 065 089 090 091 092 096 099 104 212 015 075 109 119 158 183 204Setup Code Number Setup Code Table TapeSetup Code Table Audio Setup Code Table DVDSetup Code Table SAT Setup Code Table CBL 063 115 111 112 213053 214 055 056 061 099 100 101 207Lights, motors or other electrical appliances Troubleshooting GuideProcessor Reset Information from nonencoded programsPage Technical Specifications Harman Kardon, Incorporated Part No. J90200012000

AVR 510 specifications

The Harman-Kardon AVR 510 is a high-performance AV receiver that has garnered attention for its impressive sound quality and versatile functionality. As part of Harman Kardon's esteemed line of audio equipment, the AVR 510 is designed to elevate the home entertainment experience, making it a favored choice for audiophiles and casual listeners alike.

One of the standout features of the AVR 510 is its powerful amplification system. With a robust output of up to 75 watts per channel, the receiver can drive a variety of speaker configurations, ensuring clear and dynamic sound across the frequency spectrum. This capability allows users to enjoy an immersive audio experience whether they are watching movies, playing video games, or listening to music.

The AVR 510 also supports multiple surround sound formats, including Dolby Digital and DTS. This enables users to experience rich, cinematic soundscapes that enhance the overall viewing experience. The inclusion of advanced processing technologies ensures that audio playback is accurate, highlighting the nuances in sound that make movies and music come alive.

Connectivity is another key aspect of the AVR 510, featuring a range of input options to accommodate various devices. With several HDMI inputs, digital optical and coaxial inputs, as well as analog audio connections, this receiver can seamlessly integrate with Blu-ray players, gaming consoles, and streaming devices. It also includes an AM/FM tuner, allowing users to enjoy their favorite radio stations.

The user interface of the AVR 510 is designed for convenience, featuring an intuitive on-screen menu that guides users through setup and operation. The inclusion of a remote control further enhances usability, allowing for easy access to settings and adjustments from across the room.

Additionally, the AVR 510 is equipped with Harman Kardon's proprietary technologies, such as Halosonic processing, which optimizes sound quality for various listening environments. This ensures that users can enjoy consistent audio performance regardless of their room's acoustics.

In conclusion, the Harman-Kardon AVR 510 stands out as a versatile and powerful AV receiver that enhances home entertainment through its detailed sound reproduction, robust connectivity options, and user-friendly design. Whether for serious movie watching or casual music listening, the AVR 510 delivers an exceptional audio experience that is hard to match.
Top Page Image Contents