Harman-Kardon AVR 435 Rear panel, PCM Audio Playback, MP3 Audio Playback, Or front panel *Ó

Page 37

Operation

of the demodulator to the Optical or Coaxial inputs *Ó of the AVR. No demodulator is required for use with DVD players or DTS- encoded laser discs.

In order to provide maximum playback compati- bility with DVDs, the AVR 435 receiver will always default first to the playback mode embedded in a disc’s digital “flag” information. For Dolby Digital discs, the following playback modes are initially selected after the AVR locks to the incoming digi- tal audio data stream to identify the selected:

•When a 5.1 audio stream is detected, the Dolby Digital 5.1 format will be selected, regardless of the number of speakers in your system, in compliance with Dolby Laboratories licensing requirements.

•When a disc with the Dolby Digital EX format flag is played, your system will automatically switch to the EX mode when seven main chan- nel speakers are available.

•When a disc with Dolby Digital data, but only 2.0 audio is detected, the default mode is Dolby Digital with Pro Logic II post-processing when you have a 5.1 speaker system, or Dolby Digital with Pro Logic IIx post-processing when you have a 7.1 speaker system.

•Depending on the number of speaker channels available in your system, once the AVR locks to the digital signal, you may select any surround mode or post-processing option that is avail- able, based on the incoming data stream’s pos- sible restrictions and the number of speakers in your system. For example, when a 5.1 or 2.0 audio stream is in use, you may select alternate postprocessing such as Logic 7/7-Channel Movie Mode post-processing to create the rear surrounds in 7.1 speaker systems.

DTS

DTS is another digital audio system that is capa- ble of delivering 5.1, 6.1 or 7.1 audio. Although both DTS and Dolby Digital are digital, they use different methods of encoding the signals, and thus they require different decoding circuits to convert the digital signals back to analog.

DTS-encoded sound tracks are available on select DVD and LD discs, as well as on special audio- only DTS CDs. You may use any LD, DVD or CD player equipped with a digital output to play DTS-encoded special audio-only CDs with the AVR, but DTS-LDs can be played on LD players and DTS-DVDs on DVD players only. All that is required is to connect the player’s digital output to either the Optical or Coaxial input on the

rear panel

or front panel *Ó.

In order to listen to DVDs encoded with DTS sound tracks, the DVD player must be compatible with the DTS signal as indicated by a DTS logo on the player’s front panel. Note that early DVD players may not be able to play DTS- encoded DVDs. This does not indicate a problem with the AVR, as some players cannot pass the DTS signal through to the digital outputs. If you are in doubt as to the capability of your DVD player to handle DTS DVDs, consult the player’s owner’s manual.

Please note that some DVD players are shipped with their output set for Dolby Digital only. To insure that DTS data is being sent to the AVR, please check the setup menu system on your DVD player to make certain that DTS data output is enabled.

PCM Audio Playback

PCM (Pulse Code Modulation) is the non- com- pressed digital audio system used for compact discs, Non-Dolby Digital/DTS Laserdiscs and some special PCM encoded DVDs. The digital circuits in the AVR are capable of high quality digital-to-ana- log decoding, and they may be connected directly to the digital audio output of your CD/DVD or LD player (LD only for PCM or DTS programs, for Dolby Digital laser discs an RF adapter is needed, see ”Dolby Digital” above).

Connections may be made to either the Optical

or Coaxial inputs on the rear panel or the front panel Digital Inputs *Ó.

To listen to a PCM digital source, first select the input for the desired source (e.g., CD) to feed its video signal (if any) to the TV monitor and to pro- vide its analog audio signal for recording. Next press the Digital Select button ÛGand then use the ⁄/ ¤ buttons Eon the remote, or the Selector buttons 7$ on the front panel, until the desired choice appears in the Lower Display Line ˜, then press the Set button @Fto confirm the choice.

In most cases this will be 48 KHZ, though in the case of specially mastered, high-resolution audio discs you will see a 96 KHZ indication.

The PCM 48 KHZ indication will also appear when modes or inputs are changed for analog sources. In those cases the system is telling you the sampling frequency used internally at the output of the analog-to-digital converters that change the incoming signal from a VCR, tape deck, the tuner, or other ana-log source to digital.

During PCM playback the unit automatically will turn to the default surround mode or to the LOGIC 7 mode but you also may select any surround mode except Dolby Digital or DTS.

MP3 Audio Playback

The AVR is one of the few A/V receivers to pro- vide on-board decoding for the MP3 audio for- mat used on specific computer audio files and by portable MP3 players/recorders. In addition, some new CD and DVD players are capable of playing back optical discs that are recorded with MP3, rather than standard CD audio information. By offering MP3 decoding, the AVR is able to deliver more precise conversion of the digital signals to an analog output, along with the

benefits of listening to MP3 audio through the AVR’s high current amplifier and the speakers from your surround system, rather than the small- er speakers and low powered amplifiers typically used with computers.

To take advantage of the AVR’s MP3 capabilities, simply connect the digital (SPDIF) output of a computer sound card able to feed the MP3 for- mat to its digital output, or the digital (SPDIF) output of MP3 compatible CD or DVD players or of a portable MP3 player with a digital output to

either the rear panel Digital Inputs or the front panel Digital Inputs *Ó.

NOTES:

•The AVR is only capable of playing signals in the MP3 (MPEG 1/Layer 3) format. It is not com- patible with other computer audio codecs.

•The MP 3 DSP mode found in the new AVR requires an MP3 SPDIF stream. Presently, only a few units provide this but in the coming genera- tions of motherboards and operating system updates this will follow, since SPDIF is the stan- dard for audio & video hardware.

•The digital audio input signal may be either optical or coaxial, but the signal must be in the MP3 SPDIF format. Direct connection of USB or serial data outputs is not possible, even though the signals are in the MP3 format. If you have any questions about the data output format from your computer or a sound card, check with the device’s Owner’s Manual or contact the manufac- turer’s technical support area.

•If your computer or sound card’s digital output is not capable of direct connection to the AVR or if the output is not capable of delivering MP3 data stream, you may use an optional, external transcoder, such as those available from Harman Kardon to convert the USB output of a computer to a format compatible with the AVR. Contact your Harman Kardon dealer for additional details.

OPERATION 37

Page 36 Page 38
Image 37
Page 36 Page 38
Contents AVR Power for the Digital RevolutionDeclaration of Conformity Table of ContentsAVR 435’s power simple to use Description and FeaturesIntroduction Zone II remote is includedImportant Safety Information Introduction / Safety InformationUnpacking Front Panel Controls More information Coaxial ÓTo select between the Optical Digital Audio Outputs Connect these Rear Panel ConnectionsSwitched Outlet AC Power Cord Jack Connect the AC Unswitched Outlet+ and negative terminals AVR 435 when appropriate upgrades are availableRemote IR Carrier Output The output Light Button Main Remote Control FunctionsChannel Direct Inputs the input Main Remote Control FunctionsMain Remote Control Functions Main Remote Control Functions Multi IR input jack Zone II Remote Control Functions∆ Play Forward/Reverse/Stop K Mute Infrared sensor that is connected to the AVR’sAudio Equipment Connections Installation and ConnectionsVideo Equipment Connections Any of the Video Audio Inputs Scart A/V ConnectionsVideo Connection Notes Important Note for Adapter CablesImportant Note for the Use SCART-Cinch Adapters If you use a unit providing RGB signals on aSystem and Power Connections Speaker Selection Speaker PlacementUsing the On-Screen Display System ConfigurationSystem Setup Input SetupInput Select Button ÛGon the front panel Audio Setup‹/ › Navigation Button Eso that OUT Press the ⁄/¤ Navigation Button EandSo that the cursor is next to Surround SetupBack T O Main Menu line and press the Set Button F Night Mode Settings Using EzSet/EQC K N E a R E L D C K M a S T E R M E N U Speaker Setup Manual SetupSurround Speaker Crossover Setting Once to move to the next line Delay SettingsWhen the delay settings are complete, press Output Level AdjustmentManual Setup menu Button on the remoteOn the remote Volume until you can hear the test noise clearlyAdditional Input Adjustments Operation Surround Mode ChartNo delay available Delay time not adjustableMix of the in-phase material of the left and right channels DTS Neo6 MusicBasic Operation Controls and Use of HeadphonesSource Selection Channel/8-Channel Direct InputDigital Audio Playback Surround Mode SelectionDolby Digital PCM Audio Playback Rear panelMP3 Audio Playback Or front panel *ÓSpeaker/Channel Indicators Digital Bitstream IndicatorsSelecting a Digital Source Audio, while the main feature is available Night ModeTape Recording Puts for Tape OutputsMemory Backup Output Level Adjustment With Source SignalsNormal output level adjustment for Dim FunctionTurn On Volume Level Advanced FeaturesSemi-OSD Settings Front-Panel-Display FadeFull-OSD Time Out Adjustment Advanced Features / Multiroom OperationDigital Auto-Poll Settings Multiroom OperationSurround Amplifier Channel Assignment Multiroom OperationBasic Tuner Operation Multiroom Operation / Tuner OperationTuner Operation RDS TuningRDS Operation RDS Display OptionsPreprogrammed Code Entry Configuring the RemoteAppears Automatic Code Entry Learning CommandsFappears Learning Codes for an Input Selector Programming the RemoteDevice Priority Changing DevicesRecording a Macro Macro ProgrammingWill scroll to its right. For example, press Erasing a Macro Power On VID 2/TV VID 3/Cable AVR Logic 7 OAt the next menu screen press Read a MacroVolume Punch-Through Punch-Through ConfigurationReturning the Volume Control Settings to Default Operation Red. Press the ⁄¤ Navigation ButtonsRenaming Returning the Channel Control Settings to Default OperationTransport Punch-Through Record Pand Skip Up/DownRenaming Individual Keys ‹/› Navigation Buttons Eas requiredBacklight Options Resetting the RemoteAt this point you have two options See page 34 for more informationAdditional Notes on Configuring and Operating the Remote Processor Reset Troubleshooting GuidePower Switch 1 is pushed Press the AVR SelectorTechnical Specifications Harman Consumer Group International

AVR 435 specifications

The Harman-Kardon AVR 435 is a versatile and powerful home theater receiver that has made a significant mark in the world of audio-visual entertainment. Known for its impressive audio quality and advanced features, this unit caters to both casual listeners and audiophiles looking for a rich experience.

At the heart of the AVR 435 is its 7.1 channel configuration, providing a robust sound system that envelops listeners in an immersive audio experience. Each channel is powered by high-performance amplifiers, delivering a total output of 100 watts per channel. This ensures dynamic sound reproduction, whether you are watching movies, playing games, or listening to music.

One of the standout features of the AVR 435 is its support for various surround sound formats, including Dolby Digital, DTS, and Dolby Pro Logic II. This enables the receiver to decode multiple audio streams, producing an authentic surround sound experience. The inclusion of Harman-Kardon's proprietary Logic 7 processing further enhances the spatial sound, making it particularly effective for movie watching and multi-channel music.

The AVR 435 also boasts extensive connectivity options. With multiple HDMI inputs, digital audio inputs, and component video inputs, it facilitates easy connection to a wide range of devices such as Blu-ray players, gaming consoles, and streaming devices. This flexibility ensures that users can integrate their home theater system seamlessly.

Moreover, the receiver features a built-in AM/FM tuner, allowing access to a variety of radio stations, and provides pre-set options for user convenience. An intuitive on-screen setup guide makes configuration simple, allowing users to adjust settings according to their personal preferences.

Another notable characteristic is the inclusion of a room EQ feature, which helps optimize sound performance based on the specific acoustics of your space. This ensures that users receive the best possible audio quality regardless of their room layout.

The design of the AVR 435 emphasizes both style and functionality. Its sleek, modern aesthetic fits seamlessly into any home decor, while the layout of controls is user-friendly. Whether using the remote control or the front panel, navigating through the various functions is straightforward.

In conclusion, the Harman-Kardon AVR 435 represents a powerful blend of sound quality, advanced technology, and user-friendly features. It stands as a solid choice for anyone eager to create an exceptional home theater experience.
Top Page Image Contents