Harman-Kardon AVR 435 Unswitched Outlet, Switched Outlet AC Power Cord Jack Connect the AC

Page 8

Rear Panel Connections

Video Monitor Outputs: Connect this jack to the composite and/or S-Video input of a TV monitor or video projector to view the on-screen menus and the output of any standard Video or S-Video source selected by the receiver’s video switcher.

DVD Video Inputs: Connect these jacks to the composite or S-Video output jacks on a DVD player or other video source.

Front Speaker Outputs: Connect these outputs to the matching + or – terminals on your left and right speakers. In conformance with the new CEA color code specification, the White terminal is the positive, or "+" terminal that should be connected to the red (+) terminal on Front Left speaker with the older color coding, while the Red terminal is the positive, or "+" terminal that should be connected to the red (+) terminal on Front Right speaker. Connect the black (–) terminals on the AVR to the black (–) terminals on the speakers. See page 15 for more information on speaker polarity.

Center Speaker Outputs: Connect these outputs to the matching + and – terminals on your center channel speaker. In conformance with the new CEA color code specification, the Green Terminal is the positive, or "+" terminal that should be connected to the red (+) terminal on speakers with the older color coding. Connect the black (–) terminal on the AVR to the black negative (–) terminal on your speaker. (See page 15 for more information on speaker polarity.)

Surround Speaker Outputs: Connect these outputs to the matching + and – terminals on your surround channel speakers. In confor- mance with the new CEA color code specifica- tion, the Blue terminal is the positive, or "+" terminal that should be connected to the red (+) terminal on the Surround Left speaker with older color coding, while the Gray terminal should be connected to the red (+) terminal on the Surround Right speaker with the older color cod- ing. Connect the black (–) terminal on the AVR to the matching black negative (–) terminals for each surround speaker. (See page 15 for more information on speaker polarity.)

Switched AC Accessory Outlet: This out- let may be used to power any device that you wish to have turn on when the AVR is turned on with the System Power Control switch 2.

Unswitched AC Accessory Outlet: This outlet may be used to power any AC device. The power will remain on at this outlet regardless of whether the AVR is on or off (in Standby), pro- vided that the Main Power switch 1 is on.

Note: The total power consumption of all devices connected to the accessory outlets should not exceed 100 watts from the

Unswitched Outlet

and 50 W from the

Switched Outlet .

 

AC Power Cord Jack: Connect the AC

power cord to this jack when the installation is complete. To ensure safe operation, use only the power cord supplied with the unit. If a replace- ment is required it must be of the same type and capacity.

Component Video 2 Inputs: These inputs may be used with any video source device equipped with analog Y/Pr/Pb or RGB com- ponent video outputs. The factory default is for these jacks to be a linked to the Video 2 input, but you may change the setting at any time through the IN/OUT SETUP menu. See page 15 for more information on configuring the component video inputs.

Monitor Component Video Outputs: Connect these outputs to the component video inputs of a video projector or monitor. When a source connected to one of the two

Component Video Inputs is selected the signal will be sent to these jacks.

Component Video 1 Inputs: These inputs may be used with any source device equipped with analog Y/Pr/Pb or RGB component video outputs. The factory default is for these jacks to be a linked to the Video 1 input, but you may change the setting at any time through the IN/OUT SETUP menu. See page 15 for more information on configuring the component video inputs.

Note: All component inputs/outputs can be used for RGB signals too, in the same way as described for the Y/Pr/Pb signals, then connected to the jacks with the corresponding color.

RGB connection is not possible if the source out- puts a separate sync signal (see page 16).

Remote IR Output: This connection permits the IR sensor in the receiver to serve other remote controlled devices. Connect this jack to the “IR IN” jack on Harman Kardon or other compatible equipment.

Remote IR Input: If the AVR’s front-panel IR sensor is blocked due to cabinet doors or other obstructions, an external IR sensor may be used. Connect the output of the sensor to this jack.

Multiroom IR Input: Connect the output of an IR sensor in a remote room to this jack to operate the AVR’s multiroom control system.

Video 1 Video Outputs: Connect these jacks to the RECORD/INPUT composite or S-Video jack on a VCR.

Video 1 Video Inputs: Connect these jacks to the PLAY/OUT composite or S-Video jacks on a VCR or other video source.

Video 2 Video Outputs: Connect these jacks to the RECORD/INPUT composite or S-Video jacks on a second VCR.

Video 3 Video Inputs: Connect these jacks to the PLAY/OUT composite or S-Video jacks on any video source.

Video 2 Video Inputs: Connect these jacks to the PLAY/OUT composite or S-Video jacks on a second VCR or other video source.

Optical Digital Inputs: Connect the optical digital output from a DVD player, HDTV receiver, the S/PDIF output of a compatible com- puter sound card playing MP3 files or streams, LD player, MD player or CD player to these jacks. The signal may be either a Dolby Digital signal, a DTS signal, a 2 channel MPEG 1 signal or MP3 data stream or a standard PCM digital source.

Coaxial Digital Inputs: Connect the coax digital output from a DVD player, HDTV receiver, the S/PDIF output of a compatible computer sound card playing MP3 files or streams, LD player, MD player or CD player to these jacks. The signal may be either a Dolby Digital signal, DTS signal, a 2 channel MPEG 1 signal or MP3 data stream or a standard PCM digital source. Do not connect the RF digital output of an LD player to these jacks.

Video 2 Audio Outputs: Connect these jacks to the RECORD/INPUT audio jacks on a VCR or any Audio recorder.

Video 2 Audio Inputs: Connect these jacks to the PLAY/OUT audio jacks on a second VCR or other audio or video source.

Video 3 Audio Inputs: Connect these jacks to the PLAY/OUT audio jacks on any audio or video source.

Video 1 Audio Inputs: Connect these jacks to the PLAY/OUT audio jacks on a VCR or other audio or video source.

Video 1 Audio Outputs: Connect these jacks to the RECORD/INPUT audio jacks on a VCR or any other Audio recorder.

8REAR PANEL CONNECTIONS

Image 8
Contents Power for the Digital Revolution AVRTable of Contents Declaration of ConformityDescription and Features AVR 435’s power simple to useIntroduction Zone II remote is includedUnpacking Introduction / Safety InformationImportant Safety Information Front Panel Controls To select between the Optical Coaxial ÓMore information Rear Panel Connections Digital Audio Outputs Connect theseUnswitched Outlet Switched Outlet AC Power Cord Jack Connect the ACRemote IR Carrier Output The output AVR 435 when appropriate upgrades are available+ and negative terminals Main Remote Control Functions Light ButtonMain Remote Control Functions Channel Direct Inputs the inputMain Remote Control Functions Main Remote Control Functions Zone II Remote Control Functions Multi IR input jack∆ Play Forward/Reverse/Stop K Mute Infrared sensor that is connected to the AVR’sVideo Equipment Connections Installation and ConnectionsAudio Equipment Connections Scart A/V Connections Any of the Video Audio InputsVideo Connection Notes Important Note for Adapter CablesIf you use a unit providing RGB signals on a Important Note for the Use SCART-Cinch AdaptersSystem and Power Connections Speaker Placement Speaker SelectionSystem Configuration Using the On-Screen DisplaySystem Setup Input SetupAudio Setup Input Select Button ÛGon the front panel‹/ › Navigation Button Eso that OUT Press the ⁄/¤ Navigation Button EandBack T O Main Menu line and press the Set Button F Surround SetupSo that the cursor is next to Using EzSet/EQ Night Mode SettingsC K N E a R E L D C K M a S T E R M E N U Manual Setup Speaker SetupSurround Speaker Crossover Setting Delay Settings Once to move to the next lineOutput Level Adjustment When the delay settings are complete, pressManual Setup menu Button on the remoteVolume until you can hear the test noise clearly On the remoteAdditional Input Adjustments Surround Mode Chart OperationDelay time not adjustable No delay availableMix of the in-phase material of the left and right channels DTS Neo6 MusicControls and Use of Headphones Basic OperationSource Selection Channel/8-Channel Direct InputDolby Digital Surround Mode SelectionDigital Audio Playback Rear panel PCM Audio PlaybackMP3 Audio Playback Or front panel *ÓSelecting a Digital Source Digital Bitstream IndicatorsSpeaker/Channel Indicators Night Mode Audio, while the main feature is availableTape Recording Puts for Tape OutputsOutput Level Adjustment With Source Signals Memory BackupNormal output level adjustment for Dim FunctionAdvanced Features Turn On Volume LevelSemi-OSD Settings Front-Panel-Display FadeAdvanced Features / Multiroom Operation Full-OSD Time Out AdjustmentDigital Auto-Poll Settings Multiroom OperationMultiroom Operation Surround Amplifier Channel AssignmentMultiroom Operation / Tuner Operation Basic Tuner OperationRDS Tuning Tuner OperationRDS Operation RDS Display OptionsAppears Configuring the RemotePreprogrammed Code Entry Fappears Learning CommandsAutomatic Code Entry Programming the Remote Learning Codes for an Input SelectorDevice Priority Changing DevicesWill scroll to its right. For example, press Macro ProgrammingRecording a Macro Power On VID 2/TV VID 3/Cable AVR Logic 7 O Erasing a MacroAt the next menu screen press Read a MacroPunch-Through Configuration Volume Punch-ThroughReturning the Volume Control Settings to Default Operation Red. Press the ⁄¤ Navigation ButtonsReturning the Channel Control Settings to Default Operation RenamingTransport Punch-Through Record Pand Skip Up/Down‹/› Navigation Buttons Eas required Renaming Individual KeysResetting the Remote Backlight OptionsAt this point you have two options See page 34 for more informationAdditional Notes on Configuring and Operating the Remote Troubleshooting Guide Processor ResetPower Switch 1 is pushed Press the AVR SelectorTechnical Specifications Harman Consumer Group International

AVR 435 specifications

The Harman-Kardon AVR 435 is a versatile and powerful home theater receiver that has made a significant mark in the world of audio-visual entertainment. Known for its impressive audio quality and advanced features, this unit caters to both casual listeners and audiophiles looking for a rich experience.

At the heart of the AVR 435 is its 7.1 channel configuration, providing a robust sound system that envelops listeners in an immersive audio experience. Each channel is powered by high-performance amplifiers, delivering a total output of 100 watts per channel. This ensures dynamic sound reproduction, whether you are watching movies, playing games, or listening to music.

One of the standout features of the AVR 435 is its support for various surround sound formats, including Dolby Digital, DTS, and Dolby Pro Logic II. This enables the receiver to decode multiple audio streams, producing an authentic surround sound experience. The inclusion of Harman-Kardon's proprietary Logic 7 processing further enhances the spatial sound, making it particularly effective for movie watching and multi-channel music.

The AVR 435 also boasts extensive connectivity options. With multiple HDMI inputs, digital audio inputs, and component video inputs, it facilitates easy connection to a wide range of devices such as Blu-ray players, gaming consoles, and streaming devices. This flexibility ensures that users can integrate their home theater system seamlessly.

Moreover, the receiver features a built-in AM/FM tuner, allowing access to a variety of radio stations, and provides pre-set options for user convenience. An intuitive on-screen setup guide makes configuration simple, allowing users to adjust settings according to their personal preferences.

Another notable characteristic is the inclusion of a room EQ feature, which helps optimize sound performance based on the specific acoustics of your space. This ensures that users receive the best possible audio quality regardless of their room layout.

The design of the AVR 435 emphasizes both style and functionality. Its sleek, modern aesthetic fits seamlessly into any home decor, while the layout of controls is user-friendly. Whether using the remote control or the front panel, navigating through the various functions is straightforward.

In conclusion, the Harman-Kardon AVR 435 represents a powerful blend of sound quality, advanced technology, and user-friendly features. It stands as a solid choice for anyone eager to create an exceptional home theater experience.