Harman-Kardon AVR 435 Introduction / Safety Information, Important Safety Information, Unpacking

Page 4

Introduction / Safety Information

Preamp Outputs for Easy Expansion and Use with Future Audio Formats

■Extensive bass management options, 6/8-channel direct inputs for use with DVD-Audio or SACD players, including Quadruple Crossover and individual settings for each input

■A/V Sync delay adjustable for each input delivers perfect lip sync with digital programs or video displays

■Main Backlit Remote with Internal Codes and Learning Capability

Important Safety Information

Verify Line Voltage Before Use

Your AVR 435 has been designed for use with 220-240-Volt AC current. Connection to a line voltage other than that for which it is intended can create a safety and fire hazard and may damage the unit.

If you have any questions about the voltage requirements for your specific model, or about the line voltage in your area, contact your dealer before plugging the unit into a wall outlet.

Do Not Use Extension Cords

To avoid safety hazards, use only the power cord attached to your unit. We do not recommend that extension cords be used with this product. As with all electrical devices, do not run power cords under rugs or carpets or place heavy objects on them. Damaged power cords should be replaced immediately by an authorized serv- ice depot with a cord meeting factory specifica- tions.

Handle the AC Power Cord Gently

When disconnecting the power cord from an AC outlet, always pull the plug, never pull the cord. If you do not intend to use the unit for any considerable length of time, disconnect the plug from the AC outlet.

Do Not Open the Cabinet

There are no user-serviceable components inside this product. Opening the cabinet may present a shock hazard, and any modification to the prod- uct will void your guarantee. If water or any metal object such as a paper clip, wire or a staple accidentally falls inside the unit, discon- nect it from the AC power source immediately, and consult an authorized service station.

Installation Location

■To assure proper operation and to avoid the potential for safety hazards, place the unit on a firm and level surface. When placing the unit on a shelf, be certain that the shelf and any mounting hardware can support the weight of the product.

■Make certain that proper space is provided both above and below the unit for ventilation. If this product will be installed in a cabinet or other enclosed area, make certain that there is sufficient air movement within the cabinet. Under some circumstances a fan may be required.

■Do not place the unit directly on a carpeted surface.

■Avoid installation in extremely hot or cold locations, or an area that is exposed to direct sunlight or heating equipment.

■Avoid moist or humid locations.

■Do not obstruct the ventilation slots on the top of the unit, or place objects directly over them.

Cleaning

When the unit gets dirty, wipe it with a clean, soft, dry cloth. If necessary, wipe it with a soft cloth dampened with mild soapy water, then a fresh cloth with clean water. Wipe dry immedi- ately with a dry cloth. NEVER use benzene, aerosol cleaners, thinner, alcohol or any other volatile cleaning agent. Do not use abrasive cleaners, as they may damage the finish of metal parts. Avoid spraying insecticide near the unit.

Moving the Unit

Before moving the unit, be certain to disconnect any interconnection cords with other compo- nents, and make certain that you disconnect the unit from the AC outlet.

Unpacking

The carton and shipping materials used to pro- tect your new receiver during shipment were specially designed to cushion it from shock and vibration. We suggest that you save the carton and packing materials for use in shipping if you move, or should the unit ever need repair.

To minimize the size of the carton in storage, you may wish to flatten it. This is done by care- fully slitting the tape seams on the bottom and collapsing the carton. Other cardboard inserts may be stored in the same manner. Packing materials that cannot be collapsed should be saved along with the carton in a plastic bag.

If you do not wish to save the packaging materi- als, please note that the carton and other sec- tions of the shipping protection are recyclable. Please respect the environment and discard those materials at a local recycling center.

4INTRODUCTION / SAFETY INFORMATION

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Power for the Digital Revolution AVRTable of Contents Declaration of ConformityDescription and Features AVR 435’s power simple to useIntroduction Zone II remote is includedImportant Safety Information Introduction / Safety InformationUnpacking Front Panel Controls More information Coaxial ÓTo select between the Optical Rear Panel Connections Digital Audio Outputs Connect theseUnswitched Outlet Switched Outlet AC Power Cord Jack Connect the AC+ and negative terminals AVR 435 when appropriate upgrades are availableRemote IR Carrier Output The output Main Remote Control Functions Light ButtonMain Remote Control Functions Channel Direct Inputs the inputMain Remote Control Functions Main Remote Control Functions Zone II Remote Control Functions Multi IR input jack∆ Play Forward/Reverse/Stop K Mute Infrared sensor that is connected to the AVR’sAudio Equipment Connections Installation and ConnectionsVideo Equipment Connections Scart A/V Connections Any of the Video Audio InputsVideo Connection Notes Important Note for Adapter CablesIf you use a unit providing RGB signals on a Important Note for the Use SCART-Cinch AdaptersSystem and Power Connections Speaker Placement Speaker SelectionSystem Configuration Using the On-Screen DisplaySystem Setup Input SetupAudio Setup Input Select Button ÛGon the front panel‹/ › Navigation Button Eso that OUT Press the ⁄/¤ Navigation Button EandSo that the cursor is next to Surround SetupBack T O Main Menu line and press the Set Button F Using EzSet/EQ Night Mode SettingsC K N E a R E L D C K M a S T E R M E N U Manual Setup Speaker SetupSurround Speaker Crossover Setting Delay Settings Once to move to the next lineOutput Level Adjustment When the delay settings are complete, pressManual Setup menu Button on the remoteVolume until you can hear the test noise clearly On the remoteAdditional Input Adjustments Surround Mode Chart OperationDelay time not adjustable No delay availableMix of the in-phase material of the left and right channels DTS Neo6 MusicControls and Use of Headphones Basic OperationSource Selection Channel/8-Channel Direct InputDigital Audio Playback Surround Mode SelectionDolby Digital Rear panel PCM Audio PlaybackMP3 Audio Playback Or front panel *ÓSpeaker/Channel Indicators Digital Bitstream IndicatorsSelecting a Digital Source Night Mode Audio, while the main feature is availableTape Recording Puts for Tape OutputsOutput Level Adjustment With Source Signals Memory BackupNormal output level adjustment for Dim FunctionAdvanced Features Turn On Volume LevelSemi-OSD Settings Front-Panel-Display FadeAdvanced Features / Multiroom Operation Full-OSD Time Out AdjustmentDigital Auto-Poll Settings Multiroom OperationMultiroom Operation Surround Amplifier Channel AssignmentMultiroom Operation / Tuner Operation Basic Tuner OperationRDS Tuning Tuner OperationRDS Operation RDS Display OptionsPreprogrammed Code Entry Configuring the RemoteAppears Automatic Code Entry Learning CommandsFappears Programming the Remote Learning Codes for an Input SelectorDevice Priority Changing DevicesRecording a Macro Macro ProgrammingWill scroll to its right. For example, press Power On VID 2/TV VID 3/Cable AVR Logic 7 O Erasing a MacroAt the next menu screen press Read a MacroPunch-Through Configuration Volume Punch-ThroughReturning the Volume Control Settings to Default Operation Red. Press the ⁄¤ Navigation ButtonsReturning the Channel Control Settings to Default Operation RenamingTransport Punch-Through Record Pand Skip Up/Down‹/› Navigation Buttons Eas required Renaming Individual KeysResetting the Remote Backlight OptionsAt this point you have two options See page 34 for more informationAdditional Notes on Configuring and Operating the Remote Troubleshooting Guide Processor ResetPower Switch 1 is pushed Press the AVR SelectorTechnical Specifications Harman Consumer Group International

AVR 435 specifications

The Harman-Kardon AVR 435 is a versatile and powerful home theater receiver that has made a significant mark in the world of audio-visual entertainment. Known for its impressive audio quality and advanced features, this unit caters to both casual listeners and audiophiles looking for a rich experience.

At the heart of the AVR 435 is its 7.1 channel configuration, providing a robust sound system that envelops listeners in an immersive audio experience. Each channel is powered by high-performance amplifiers, delivering a total output of 100 watts per channel. This ensures dynamic sound reproduction, whether you are watching movies, playing games, or listening to music.

One of the standout features of the AVR 435 is its support for various surround sound formats, including Dolby Digital, DTS, and Dolby Pro Logic II. This enables the receiver to decode multiple audio streams, producing an authentic surround sound experience. The inclusion of Harman-Kardon's proprietary Logic 7 processing further enhances the spatial sound, making it particularly effective for movie watching and multi-channel music.

The AVR 435 also boasts extensive connectivity options. With multiple HDMI inputs, digital audio inputs, and component video inputs, it facilitates easy connection to a wide range of devices such as Blu-ray players, gaming consoles, and streaming devices. This flexibility ensures that users can integrate their home theater system seamlessly.

Moreover, the receiver features a built-in AM/FM tuner, allowing access to a variety of radio stations, and provides pre-set options for user convenience. An intuitive on-screen setup guide makes configuration simple, allowing users to adjust settings according to their personal preferences.

Another notable characteristic is the inclusion of a room EQ feature, which helps optimize sound performance based on the specific acoustics of your space. This ensures that users receive the best possible audio quality regardless of their room layout.

The design of the AVR 435 emphasizes both style and functionality. Its sleek, modern aesthetic fits seamlessly into any home decor, while the layout of controls is user-friendly. Whether using the remote control or the front panel, navigating through the various functions is straightforward.

In conclusion, the Harman-Kardon AVR 435 represents a powerful blend of sound quality, advanced technology, and user-friendly features. It stands as a solid choice for anyone eager to create an exceptional home theater experience.
Top Page Image Contents