Harman-Kardon AVR 435 Button on the remote, Output Level Adjustment, Manual Setup menu

Page 30

System Configuration

When the delay settings are complete, press the

¤Button Eonce so that the cursor is next to the BACK TO MANUAL SETUP menu line and press the Set Button p to return to the

MANUAL SETUP menu.

Note that the delay settings may also be adjusted at any time when the Dolby Digital or Dolby Pro Logic II modes are in use by pressing the Delay

button on the remote

. Then press the ⁄/¤

Ebuttons on the remote to select the Center or Rear channels for adjustment, followed by a press of the Set button F. Next, press the ⁄/¤ buttons Eon the remote until the desired figure appears in the Main Information Display ˜ and press the Set button p twice to confirm the setting and return to the normal display.

Output Level Adjustment

Output level adjustment is a key part of the con- figuration of any surround-sound product. It is particularly important for a digital receiver such as the AVR, as correct outputs ensure that you hear sound tracks with the proper directionality and intensity.

In most cases, you will not need to make any adjustments to the output level, as the settings made by running EzSet/EQ are as accurate as those made manually. However, you are able to use the CHANNEL ADJUST menu to trim the settings to suit your personal preferences or to configure the system so that the output set- tings are different from one input source to another. The ability to make individual output level adjustments on a per-input basis is useful for listeners who may prefer different settings for the subwoofer or an individual channel group such as the front speakers when playing musical selections via the CD input as opposed to the movie soundtracks more frequently used with the DVD input. This menu also allows you to adjust the output levels using external sources such as a test disc or other program material that you use as a standard, rather than the system’s test tone.

NOTE: Listeners are often confused about the operation of the surround channels. While some assume that sound should always be coming from each speaker, most of the time there will be little or no sound in the surround channels. This is because they are only used when a movie director or sound mixer specifically places sound there to create ambience, a special effect or to continue action from the front of the room to the rear. When the output levels are properly set, it is normal for surround speakers to operate only occasionally. Artificially increasing the volume to the rear speakers may destroy the illusion of an enveloping sound field that duplicates the way you hear sound in a movie theater or concert hall.

Before beginning the output level adjustment process, make certain that all speaker connec- tions have been properly made. The system volume should be turned down at first.

Manual output level adjustment is most easily done through the CHANNEL ADJUST menu (Figure 12). If you are already at the MANUAL SETUP menu, press the ¤ Button Euntil the on-screen› cursor is next to the CHAN- NEL ADJUST line. If you are not at the main menu, press the OSD Button vto bring up the MASTER MENU (Figure 1), and then press the ¤ Button Efour times so that the on- screen › cursor is next to the MANUAL SETUP line. Press the Set Button F, select the CHANNEL ADJUST line and press the Set Button Fto bring the CHANNEL ADJUST menu (Figure 12) to the screen.

 

*

CHANNEL

ADJUST

*

 

→ FL

:

0

dB

SBR:

0

dB

CEN:

0

dB

SBL:

0

dB

FR

:

0

dB

SL :

0

dB

SR

:

0

dB

SUB:

0

dB

TEST

TONE : AUTO

OFF MAN

LEVEL

RESET: OFF

ON

LEVEL

TRIM: GLOBAL

 

EZSET

SETTINGS: OFF ON

BACK

TO MANUAL SETUP

Figure 12

When the CHANNEL ADJUST menu first appears, the test tone is off. Use the ⁄/¤ Navigation Button Eto select any channel for adjustment using an external source, such as a test disc, from which to judge the output levels. After the ➔ cursor is pointing to the channel to be adjusted, press the ‹/› Navigation Button

Eto raise or lower the output level. However, before proceeding with any manual adjustment we recommend that you first use the AVR’s inter- nal test tone generator and automatic sequencer to send a tone to each channel so that you may verify that all speaker connections have been properly made.

To turn the test tone on and have it automatically circulate among the channels where a speaker has previously been configured (see page 27), press the ⁄/¤ Navigation Button Euntil the ➔ cursor is pointing to the TEST TONE line on the menu. Next, press the ‹/› Navigation Button Euntil AUTO is shown. This will cause the test tone to circulate, starting at the Front Left speaker. It will circulate clock- wise around the room, playing for two seconds in each speaker before switching to the next speak- er position. The ➔ cursor will blink next to the active speaker to indicate which speaker the sound should be coming from.

IMPORTANT NOTE: Because this test noise will have a much lower level than normal music, the volume must be lowered after the adjustment for all channels is made, but BEFORE you return to the main menu and the test tone turns off.

NOTE: Remember to verify that the speakers have been properly connected. As the test noise circulates, listen to make certain that the sound comes from the speaker position shown in the Main Information Display ˜. If the sound comes from a speaker location that does NOT match the position indicated in the display, turn the AVR off using the Main Power Switch 1 and check the speaker wiring or connections to external power amplifiers to make certain that each speaker is connected to the correct output terminal.

30SYSTEM CONFIGURATION

Page 29 Page 31
Image 30
Page 29 Page 31
Contents Power for the Digital Revolution AVRTable of Contents Declaration of ConformityIntroduction Description and FeaturesAVR 435’s power simple to use Zone II remote is includedIntroduction / Safety Information Important Safety InformationUnpacking Front Panel Controls Coaxial Ó More informationTo select between the Optical Rear Panel Connections Digital Audio Outputs Connect theseUnswitched Outlet Switched Outlet AC Power Cord Jack Connect the ACAVR 435 when appropriate upgrades are available + and negative terminalsRemote IR Carrier Output The output Main Remote Control Functions Light ButtonMain Remote Control Functions Channel Direct Inputs the inputMain Remote Control Functions Main Remote Control Functions ∆ Play Forward/Reverse/Stop K Mute Zone II Remote Control FunctionsMulti IR input jack Infrared sensor that is connected to the AVR’sInstallation and Connections Audio Equipment ConnectionsVideo Equipment Connections Video Connection Notes Scart A/V ConnectionsAny of the Video Audio Inputs Important Note for Adapter CablesIf you use a unit providing RGB signals on a Important Note for the Use SCART-Cinch AdaptersSystem and Power Connections Speaker Placement Speaker SelectionSystem Setup System ConfigurationUsing the On-Screen Display Input Setup‹/ › Navigation Button Eso that OUT Audio SetupInput Select Button ÛGon the front panel Press the ⁄/¤ Navigation Button EandSurround Setup So that the cursor is next toBack T O Main Menu line and press the Set Button F Using EzSet/EQ Night Mode SettingsC K N E a R E L D C K M a S T E R M E N U Manual Setup Speaker SetupSurround Speaker Crossover Setting Delay Settings Once to move to the next lineManual Setup menu Output Level AdjustmentWhen the delay settings are complete, press Button on the remoteVolume until you can hear the test noise clearly On the remoteAdditional Input Adjustments Surround Mode Chart OperationMix of the in-phase material of the left and right channels Delay time not adjustableNo delay available DTS Neo6 MusicSource Selection Controls and Use of HeadphonesBasic Operation Channel/8-Channel Direct InputSurround Mode Selection Digital Audio PlaybackDolby Digital MP3 Audio Playback Rear panelPCM Audio Playback Or front panel *ÓDigital Bitstream Indicators Speaker/Channel IndicatorsSelecting a Digital Source Tape Recording Night ModeAudio, while the main feature is available Puts for Tape OutputsNormal output level adjustment for Output Level Adjustment With Source SignalsMemory Backup Dim FunctionSemi-OSD Settings Advanced FeaturesTurn On Volume Level Front-Panel-Display FadeDigital Auto-Poll Settings Advanced Features / Multiroom OperationFull-OSD Time Out Adjustment Multiroom OperationMultiroom Operation Surround Amplifier Channel AssignmentMultiroom Operation / Tuner Operation Basic Tuner OperationRDS Operation RDS TuningTuner Operation RDS Display OptionsConfiguring the Remote Preprogrammed Code EntryAppears Learning Commands Automatic Code EntryFappears Device Priority Programming the RemoteLearning Codes for an Input Selector Changing DevicesMacro Programming Recording a MacroWill scroll to its right. For example, press At the next menu screen press Power On VID 2/TV VID 3/Cable AVR Logic 7 OErasing a Macro Read a MacroReturning the Volume Control Settings to Default Operation Punch-Through ConfigurationVolume Punch-Through Red. Press the ⁄¤ Navigation ButtonsTransport Punch-Through Returning the Channel Control Settings to Default OperationRenaming Record Pand Skip Up/Down‹/› Navigation Buttons Eas required Renaming Individual KeysAt this point you have two options Resetting the RemoteBacklight Options See page 34 for more informationAdditional Notes on Configuring and Operating the Remote Power Switch 1 is pushed Troubleshooting GuideProcessor Reset Press the AVR SelectorTechnical Specifications Harman Consumer Group International

AVR 435 specifications

The Harman-Kardon AVR 435 is a versatile and powerful home theater receiver that has made a significant mark in the world of audio-visual entertainment. Known for its impressive audio quality and advanced features, this unit caters to both casual listeners and audiophiles looking for a rich experience.

At the heart of the AVR 435 is its 7.1 channel configuration, providing a robust sound system that envelops listeners in an immersive audio experience. Each channel is powered by high-performance amplifiers, delivering a total output of 100 watts per channel. This ensures dynamic sound reproduction, whether you are watching movies, playing games, or listening to music.

One of the standout features of the AVR 435 is its support for various surround sound formats, including Dolby Digital, DTS, and Dolby Pro Logic II. This enables the receiver to decode multiple audio streams, producing an authentic surround sound experience. The inclusion of Harman-Kardon's proprietary Logic 7 processing further enhances the spatial sound, making it particularly effective for movie watching and multi-channel music.

The AVR 435 also boasts extensive connectivity options. With multiple HDMI inputs, digital audio inputs, and component video inputs, it facilitates easy connection to a wide range of devices such as Blu-ray players, gaming consoles, and streaming devices. This flexibility ensures that users can integrate their home theater system seamlessly.

Moreover, the receiver features a built-in AM/FM tuner, allowing access to a variety of radio stations, and provides pre-set options for user convenience. An intuitive on-screen setup guide makes configuration simple, allowing users to adjust settings according to their personal preferences.

Another notable characteristic is the inclusion of a room EQ feature, which helps optimize sound performance based on the specific acoustics of your space. This ensures that users receive the best possible audio quality regardless of their room layout.

The design of the AVR 435 emphasizes both style and functionality. Its sleek, modern aesthetic fits seamlessly into any home decor, while the layout of controls is user-friendly. Whether using the remote control or the front panel, navigating through the various functions is straightforward.

In conclusion, the Harman-Kardon AVR 435 represents a powerful blend of sound quality, advanced technology, and user-friendly features. It stands as a solid choice for anyone eager to create an exceptional home theater experience.
Top Page Image Contents