Harman-Kardon + and negative terminals, AVR 435 when appropriate upgrades are available

Page 9

Rear Panel Connections

Preamp Outputs: Connect these jacks to an optional, external power amplifier for appli- cations where higher power is desired.

Surround Back/Multiroom Speaker Outputs: These speaker terminals are normally used to power the surround back left/surround back right speakers in a 7.1 channel system. However, they may also be used to power the speakers in a second zone, which will receive the output selected for a multiroom system.

To change the output fed to these terminals from the default of the Surround Back speakers to the Multiroom Output, you must change a setting in the Multiroom Menu of the OSD sys- tem. See page 42 for more information on con- figuring this speaker output. In normal surround system use, the brown and black terminals are the surround back left channel positive (+) and negative (–) connections and the tan and black terminals are the surround back right positive

(+) and negative (–) terminals.

For multiroom use, connect the brown and black SBL terminals to the red and black connections on the left remote zone speaker and connect the tan and black SBR terminals to the red and black terminals on the right remote zone speaker.

RS-232 Port: This jack may be used to con- trol the AVR 435 over a bi-directional RS-232 serial control link to a compatible computer or programmable remote control system. Due to the complexity of programming RS-232 com- mands we strongly recommend that connections to this port for control purposes be made by a trained and qualified technician. This jack may also link to a compatible computer to upgrade the software and operating system of the

AVR 435 when appropriate upgrades are available.

Fan Vents: These ventilation holes are the output of the AVR’s airflow system. To ensure proper operation of the unit and to avoid possi- ble damage to delicate surfaces, make certain that these holes are not blocked and that there is at least three inches of open space between the vent holes and any wooden or fabric surface.

DVD Component Video Inputs: These inputs may be used with any source device equipped with analog Y/Pr/Pb or RGB compo- nent video outputs. The factory default is for these jacks to be a linked to the DVD input, but you may change the setting at any time through the IN/OUT SETUP menu. See page 15 for more information on configuring the component video inputs.

Remote IR Carrier Output: The output of

this jack is the full signal received at the Remote Sensor Window ¯ or input through the Remote IR Input including the carrier frequency that is removed from signals at the Remote IR Output . Use this output to extend IR remote signals to the input of compatible products by direct connection or through the use of optional, external IR “blasters”. If you are in doubt as to which of the two IR Output jacks to use, we recommend that you consult with your dealer or installer, or check with the manufacturer of the external equipment you wish to control.

REAR PANEL CONNECTIONS 9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents AVR Power for the Digital RevolutionDeclaration of Conformity Table of ContentsAVR 435’s power simple to use Description and FeaturesIntroduction Zone II remote is includedIntroduction / Safety Information Important Safety InformationUnpacking Front Panel Controls Coaxial Ó More informationTo select between the Optical Digital Audio Outputs Connect these Rear Panel ConnectionsSwitched Outlet AC Power Cord Jack Connect the AC Unswitched OutletAVR 435 when appropriate upgrades are available + and negative terminalsRemote IR Carrier Output The output Light Button Main Remote Control FunctionsChannel Direct Inputs the input Main Remote Control FunctionsMain Remote Control Functions Main Remote Control Functions Multi IR input jack Zone II Remote Control Functions∆ Play Forward/Reverse/Stop K Mute Infrared sensor that is connected to the AVR’sInstallation and Connections Audio Equipment ConnectionsVideo Equipment Connections Any of the Video Audio Inputs Scart A/V ConnectionsVideo Connection Notes Important Note for Adapter CablesImportant Note for the Use SCART-Cinch Adapters If you use a unit providing RGB signals on aSystem and Power Connections Speaker Selection Speaker PlacementUsing the On-Screen Display System ConfigurationSystem Setup Input SetupInput Select Button ÛGon the front panel Audio Setup‹/ › Navigation Button Eso that OUT Press the ⁄/¤ Navigation Button EandSurround Setup So that the cursor is next toBack T O Main Menu line and press the Set Button F Night Mode Settings Using EzSet/EQC K N E a R E L D C K M a S T E R M E N U Speaker Setup Manual SetupSurround Speaker Crossover Setting Once to move to the next line Delay SettingsWhen the delay settings are complete, press Output Level AdjustmentManual Setup menu Button on the remoteOn the remote Volume until you can hear the test noise clearlyAdditional Input Adjustments Operation Surround Mode ChartNo delay available Delay time not adjustableMix of the in-phase material of the left and right channels DTS Neo6 MusicBasic Operation Controls and Use of HeadphonesSource Selection Channel/8-Channel Direct InputSurround Mode Selection Digital Audio PlaybackDolby Digital PCM Audio Playback Rear panelMP3 Audio Playback Or front panel *ÓDigital Bitstream Indicators Speaker/Channel IndicatorsSelecting a Digital Source Audio, while the main feature is available Night ModeTape Recording Puts for Tape OutputsMemory Backup Output Level Adjustment With Source SignalsNormal output level adjustment for Dim FunctionTurn On Volume Level Advanced FeaturesSemi-OSD Settings Front-Panel-Display FadeFull-OSD Time Out Adjustment Advanced Features / Multiroom OperationDigital Auto-Poll Settings Multiroom OperationSurround Amplifier Channel Assignment Multiroom OperationBasic Tuner Operation Multiroom Operation / Tuner OperationTuner Operation RDS TuningRDS Operation RDS Display OptionsConfiguring the Remote Preprogrammed Code EntryAppears Learning Commands Automatic Code EntryFappears Learning Codes for an Input Selector Programming the RemoteDevice Priority Changing DevicesMacro Programming Recording a MacroWill scroll to its right. For example, press Erasing a Macro Power On VID 2/TV VID 3/Cable AVR Logic 7 OAt the next menu screen press Read a MacroVolume Punch-Through Punch-Through ConfigurationReturning the Volume Control Settings to Default Operation Red. Press the ⁄¤ Navigation ButtonsRenaming Returning the Channel Control Settings to Default OperationTransport Punch-Through Record Pand Skip Up/DownRenaming Individual Keys ‹/› Navigation Buttons Eas requiredBacklight Options Resetting the RemoteAt this point you have two options See page 34 for more informationAdditional Notes on Configuring and Operating the Remote Processor Reset Troubleshooting GuidePower Switch 1 is pushed Press the AVR SelectorTechnical Specifications Harman Consumer Group International

AVR 435 specifications

The Harman-Kardon AVR 435 is a versatile and powerful home theater receiver that has made a significant mark in the world of audio-visual entertainment. Known for its impressive audio quality and advanced features, this unit caters to both casual listeners and audiophiles looking for a rich experience.

At the heart of the AVR 435 is its 7.1 channel configuration, providing a robust sound system that envelops listeners in an immersive audio experience. Each channel is powered by high-performance amplifiers, delivering a total output of 100 watts per channel. This ensures dynamic sound reproduction, whether you are watching movies, playing games, or listening to music.

One of the standout features of the AVR 435 is its support for various surround sound formats, including Dolby Digital, DTS, and Dolby Pro Logic II. This enables the receiver to decode multiple audio streams, producing an authentic surround sound experience. The inclusion of Harman-Kardon's proprietary Logic 7 processing further enhances the spatial sound, making it particularly effective for movie watching and multi-channel music.

The AVR 435 also boasts extensive connectivity options. With multiple HDMI inputs, digital audio inputs, and component video inputs, it facilitates easy connection to a wide range of devices such as Blu-ray players, gaming consoles, and streaming devices. This flexibility ensures that users can integrate their home theater system seamlessly.

Moreover, the receiver features a built-in AM/FM tuner, allowing access to a variety of radio stations, and provides pre-set options for user convenience. An intuitive on-screen setup guide makes configuration simple, allowing users to adjust settings according to their personal preferences.

Another notable characteristic is the inclusion of a room EQ feature, which helps optimize sound performance based on the specific acoustics of your space. This ensures that users receive the best possible audio quality regardless of their room layout.

The design of the AVR 435 emphasizes both style and functionality. Its sleek, modern aesthetic fits seamlessly into any home decor, while the layout of controls is user-friendly. Whether using the remote control or the front panel, navigating through the various functions is straightforward.

In conclusion, the Harman-Kardon AVR 435 represents a powerful blend of sound quality, advanced technology, and user-friendly features. It stands as a solid choice for anyone eager to create an exceptional home theater experience.
Top Page Image Contents