Harman-Kardon AVR 8500 owner manual Scart A/V Connections, Component Video Inputs . Note that even

Page 16

Installation and Connections

5.Connect the Composite and S-Video (if S-Video device is in use) Monitor Output jacks on the receiver to the composite and S-Video input of your television monitor or video projector.

6.If your DVD player and monitor both have component video connections, connect the com- ponent outputs of the DVD player to the DVD

Component Video Inputs . Note that even

when component video connections are used the audio connections must still be made to either

the analog DVD Inputs

or any of the

 

Coaxial or Optical Digital Input jacks

.

7.If another component video device is available, connect it to the Video 1/ Video 2 Component Video Inputs . The audio connections for this device should be made to either the Video 1/ Video 2 Inputs or any of the Coaxial or

Optical Digital Input jacks

.

8.If the component video inputs are used, con- nect the Monitor Component Video Output to the component video inputs of your TV,

projector or display device.

9.If you have a camcorder, video game or other audio/video device that is connected to the AVR on a temporary, rather than permanent basis, connect the audio, video and digital audio out- puts of that device to the Front Panel Inputs *ÓÒ. A device connected to the Video 5 jacks Òis selected as the Video 5 input, and connected to the digital jacks *Óit is selected as ”Optical 4” or ”Coaxial 4” input. (See page

21for more information on input configuration.)

Video Connection Notes:

•Y/Pr/Pb Component, RGB (see page 17), S-Video or Composite video signals may only be viewed in their native formats and will not be converted to the other formats.

•When the component video jacks are used, the on-screen menus will not be visible. You must switch to the standard composite or S-Video input on your TV to view those menus.

•All component inputs/outputs can be used for RGB signals too, in the same way as described for the Y/Pr/Pb signals, then connected to the jacks with the corresponding color.

But this is only correct as long as only the three RGB video signals are output by the video source, with a sync signal in the ”G” signal only, without any sync signal output separately by the source.

SCART A/V Connections

For the connections described above your video device needs RCA (cinch) connectors or/and S- Video connectors for all Audio and Video signals: Any normal video device (Not SVHS or High 8) for only playback needs 3 RCA jacks, VCRs for record and playback even 6 RCA jacks. Any S- Video device (SVHS, High 8) needs 2 RCA (Audio) and 1 S-Video jack (Video), if it´s a playback unit, or 4 RCA (Audio In/Out) and

2 S-Video (Video In/Out) jacks, if it´s a recording VCR.

Many european video devices are equipped with RCA (Cinch) or S-Video jacks only partially, not for all audio and video in/outputs needed as described above, but with a so called Scart or Euro-AV connector (almost rectangular jack with 21 pins, see drawings on next page).

In that case the following Scart to Cinch adapters or cables are needed:

•Units for playback, such as satellite receivers, camcorders, DVD or LD players, need an adapter from Scart to 3 RCA plugs, see fig. 1 (normal video devices) or from Scart to 2 RCA+1 S-Video plugs, see fig. 4 (S-Video devices).

•HiFi VCRs need an adapter from Scart to 6 RCA plugs, see fig. 2 (normal video), or from Scart to 4 Audio+2S-Video jacks, see fig. 5 (S-Video VCR). Read carefully the instruction attached to the adapter to find which of the six plugs is used for the record signal to the VCR (connect with the AVR´s Out jacks) and for the playback signal from the VCR (connect with the AVR´s In jacks). Do not misconnect Audio and Video signals. Don´t hesitate to consult your dealer, if you are uncertain.

•If you use only normal video devices the TV monitor needs an adapter from 3 RCA plugs to Scart (fig. 3) only. If also S-Video devices are used an adapter from 2 RCA+1S-Video plugs to Scart is needed additionally (fig. 6), connected to the SCART input on your TV that is provided for S-Video.

Note that only the video plugs (the ”yellow” cinch plug in fig. 3 and the S-Video plug in fig.

6)must be connected to the TV Monitor Output , and the volume on the TV must be reduced to minimum.

Important Note for Adapter Cables:

If the cinch connectors of the adapter you’ll use are labeled, connect the Audio and Video ”In” plugs with the corresponding Audio and Video ”In” jacks on the AVR (and with a VCR connect the ”Out” plugs to the ”Out” jacks on the AVR). Note that with some adapter types it may be just turned around: If no signal is audible/ visible when the VCR is playing connect the “Out” plugs to the ”In” jacks on the AVR and turned around. If the adapter plugs are not labeled in that way, pay attention to the signal flow direc- tions as shown in the diagrams above and in the instruction attached to the adapter. If uncertain, don’t hesitate to consult your dealer.

Important Notes for S-Video connections:

1.Only the S-Video In/Out of S-Video devices must be connected to the AVR, NOT both, nor- mal video and S-Video In/Outputs (except the TV, see item below).

When both connections are made, only the S-Video signal will be viewed on the screen.

2.Like most common AV units the AVR does not convert the Video signal to S-Video or vice versa. Thus both connections must be made from the AVR to the TV if both, Video and S-Video sources, are used, and the appropriate input on the TV must be selected.

16INSTALLATION AND CONNECTIONS

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Power for the Digital Revolution AVR 8500 Audio/ Video ReceiverTable of Contents Declaration of ConformityDescription and Features IntroductionHdcd Decoding for Superb CD Playback IntroductionImportant Safety Information Safety InformationUnpacking Power Indicator #Preset Station Selector Headphone Jack $Stereo Mode Selector /› ButtonHome THX Mode Selector Press this Front Panel ControlsDTS-ES 6.1 Discrete DTS-ES 6.1 Matrix DTS + NEO6To select between the Optical Coaxial ÓFront Panel Information Display Multi Indicator Auto IndicatorFront Panel Information Display Channel Direct Inputs If an external Rear Panel ConnectionsRear Panel Connections Unswitched Outlet Power Off Button Program/SPL IndicatorPower On Button Surround Mode SelectorMain Remote Control Functions Channel Direct InputsMain Remote Control Functions Main Remote Control Functions Zone II Remote Control Functions ∆ Play Forward/Reverse/Stop ˚ MuteAudio Equipment Connections Installation and ConnectionsVideo Equipment Connections Scart A/V Connections Component Video Inputs . Note that evenVideo Connection Notes Important Note for Adapter CablesImportant Note for the Use SCART-Cinch Adapters Also other colours possible, e.g. brown and greySystem and Power Connections AC Power Connection Speaker PlacementSpeaker Selection System Configuration Using the On-Screen DisplaySystem Configuration First Turn OnInput Setup Speaker Setup ¤ Button Dto begin the speaker configura- tion processOptional, external power amplifiers Front panel orSubwoofer SurroundOn the remote so that Sublfe appears in the on-screen menu Within five seconds, either press ⁄/¤ buttons Surround SetupTHX Surround EX and DTS Adjustments for Other Inputs Settings Independent of the Input SelectedDelay Settings Night Mode Settings Output Level AdjustmentOn the remote. Then press the ⁄/¤ buttons To select the DOLBYmenu see figUsing EzSet Press and hold the SPL Indicator SelectTurn off the OSD system if it is in use So that on is highlightedWhen all channels have the same output level Sensor and Indicator offMenu Bass Peak Limiter Surround Mode Chart OperationDolby 3 Stereo TheaterHall OFF StereoBasic Operation Controls and Use of HeadphonesSource Selection Surround Mode Selection One of the most important featuresDigital Audio Playback Until Surr OFF appears in the Main Information Display ˆDolby Digital Dolby Digital Surround EXPCM Audio Playback MP3 Audio PlaybackDigital Bitstream Indicators Selecting a Digital SourceEand adjust to accommodate it Speaker/Channel IndicatorsOFF Output Level Adjustment With Source Signals Indicator SelectIndicator off Tape RecordingMemory Backup Channel/8-Channel Direct InputTo change the output level Will not functionAdvanced Features Speaker ResetTurn On Volume Level Advanced FeaturesSemi-OSD Settings Full-OSD Time Out AdjustmentInstallation Multiroom SetupMultiroom Operation Multiroom OperationTuner Operation Basic Tuner OperationRDS Operation Time. When the Program/SPL Indicator Programming the Remote with CodesDirect Code Entry Auto-Search MethodProgramming the Remote Code ReadoutLearning Codes from a Remote Erasing Learned CodesMacro Programming Erasing Macro CommandsPress the AVR Selector Volume Punch-Through Programmed Device FunctionsRemote With Other Devices 4and the Mute buttonChannel Control Punch-Through Selector buttonResetting the Remote Memory Function List Function ListPower On Power Off Mute TV Select Channel + Power On Power Off VID 3 Select Channel +Scan Scan + Rewind Play Fast Fwd Record Stop Pause Prev Channel 1 2 3 4 5 6 7 ClearProcessor Reset Troubleshooting GuideTroubleshooting Guide Technical Specifications Harman Consumer International

AVR 8500 specifications

The Harman-Kardon AVR 8500 is a high-performance audio/video receiver designed for enthusiasts who demand exceptional sound quality and advanced features. This model is part of the premium AVR line and has become a respected staple in home theater setups since its introduction.

One of the standout features of the AVR 8500 is its robust amplification system. With a powerful output of 120 watts per channel, it drives even the most demanding speakers and ensures a dynamic audio experience. The receiver supports a variety of surround sound formats, including Dolby Digital, Dolby Pro Logic II, DTS, and THX Surround EX, delivering an immersive listening experience for movies, games, and music.

The AVR 8500 also showcases a range of advanced processing technologies that enhance audio fidelity. Harman-Kardon’s proprietary Logic 7 processing allows for the seamless upmixing of stereo content to surround sound, providing a richer soundscape. Additionally, the integration of the latest HDMI inputs ensures that high-definition audio and video signals can be transmitted without degradation in quality. This model typically includes multiple HDMI ports, along with support for 4K video passthrough, making it an ideal choice for modern home theater configurations.

In terms of connectivity, the AVR 8500 offers versatility, featuring multiple analog and digital audio inputs, a variety of video connections, and even network capabilities for streaming music from popular services directly. The receiver often comes equipped with advanced room correction technologies, such as Harman’s proprietary room setup and calibration system, which helps to optimize sound quality based on the specific characteristics of your listening environment.

Another notable characteristic of the Harman-Kardon AVR 8500 is its user-friendly interface. The intuitive on-screen setup allows users to easily configure their audio and video settings, making it accessible not only for seasoned audiophiles but also for those new to home theater systems.

A sleek design further complements its high-performance capabilities, ensuring that the AVR 8500 not only performs well but also looks great in any entertainment setup. The combination of its advanced technological features, extensive connectivity options, and impressive sound quality makes the Harman-Kardon AVR 8500 a premier choice for anyone seeking to elevate their home audio experience.
Top Page Image Contents