Harman-Kardon AVR 8500 owner manual Main Remote Control Functions, Channel Direct Inputs

Page 11

Main Remote Control Functions

IMPORTANT NOTE: The AVR 8500’s remote may be programmed to control up to seven devices, including the AVR 8500. Before using the remote, it is important to remember to press the Input Selector button 4that corre- sponds to the unit you wish to operate. In addi- tion, the AVR’s remote is shipped from the factory to operate the AVR 8500 and most Harman Kardon CD or DVD players and cassette decks. The remote is also capable of operating a wide variety of other products using the control codes that are part of the remote or by learning com- mands from other remotes. Before using the remote with other products, follow the instruc- tions on pages 44-45 to program the proper codes for the products in your system.

It is also important to remember that many of the buttons on the remote take on different functions, depending on the product selected using the Input Selector Button 4. The descriptions shown here primarily detail the functions of the remote when it is used to oper- ate the AVR 8500. (See page 47 for information about alternate functions for the remote’s but- tons.)

0Power Off Button: Press this button to place the AVR or a selected device unit in the Standby mode. Note that when the AVR is switched off this will turn off the main room func- tions, but if the Multiroom system is activated, it will continue to function.

1IR Transmitter Window: Point this window towards the AVR when pressing buttons on the remote to make certain that infrared commands are properly received.

2Program/SPL Indicator: This three-color indicator is used to guide you through the process of programming the remote or learning commands from a remote into the AVR’s remote code memory and it is also used as a level indica- tor when using the remote’s EzSet capabilities. (See page 26 for more information on setting output levels, and see page 44 for information on programming the remote.)

3Power On Button: Press this button to turn on the power to a device selected by pressing one of the Input Selectors 4(except Tape).

4Input Selectors: Pressing one of these buttons will perform three actions at the same time. First, if the AVR is not turned on, this will power up the unit. Next, it will select the source shown on the button as the input to the AVR. Finally, it will change the remote control so that it controls the device selected. After pressing one of these buttons you must press the

AVR Selector button 5again to operate the AVR’s functions with the remote.

5AVR Selector: Pressing this button will switch the remote so that it will operate the AVR’s functions. If the AVR is in the Standby mode, it will also turn the AVR on.

6AM/FM Tuner Select: Press this button to select the AVR’s tuner as the listening choice. Pressing this button when the tuner is in use will select between the AM and FM bands.

76-Channel/8 Channel Direct Input: Press this button to select the device connected

to the 6-Channel Direct Inputs

or the

8-Channel Direct Inputs

(the input avail-

able will depend on the selection 5.1 or 6.1/7.1 made in the surround mode setting, see page 24 for more information).

8Test Tone: Press this button to begin the sequence used to calibrate the AVR’s output lev- els. (See page 26 for more information on calibrating the AVR.)

9Sleep Button: Press this button to place the unit in the Sleep mode. After the time shown in the display, the AVR will automatically go into the Standby mode. Each press of the button changes the time until turn-off in the following order:

 

 

90

 

80

 

 

70

 

 

60

 

 

50

 

 

 

min

 

min

 

min

 

min

 

 

 

min

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

40

 

30

 

 

20

 

 

10

 

 

 

OFF

 

 

 

 

 

 

 

 

 

 

 

min

 

min

 

min

 

min

 

 

 

 

 

 

 

 

 

 

 

 

 

Hold the button pressed for two seconds to turn off the Sleep mode setting.

Note that this button is also used to change channels on your TV, VCR and Sat receiver when the appropriate source is selected, using the device Input Selectors 4.

ASurround Mode Selector: Press this but- ton to select any of the HALL, THEATER or VMAx surround modes. Note that depending on the type of input, some modes are not always avail- able. (See page 30 for more information about surround modes.) Note that this button is also used to tune channels on your TV, VCR and Sat receiver when the appropriate source is selected using the device Input Selector 4.

BNight Mode: Press this button to activate the Night mode. This mode is available only with Dolby Digital encoded sources, and it preserves dialog (center channel) intelligibilty at low vol- ume levels (See page 26 for more information).

CChannel Select Button: This button is used to start the process of setting the AVR’s output levels with an external source. Once this button is pressed, use the ⁄/¤ buttons Dto select the channel being adjusted, then press the Set button F, followed by the ⁄/¤ buttons Dagain, to change the level setting. (See page 37 for more information.)

D⁄/¤ Buttons:These multipurpose buttons are used to change or scroll through items in the on-screen menus or on the front panel or to make configuration settings such as digital inputs or delay timing. When changing a setting, first press the button for the function or setting to be changed (e.g., press the Digital Select Button Gto change a digital input) and then press one of these buttons to scroll through the list of options or to increase or decrease a set- ting. The sections in this manual describing the individual features and functions contain specific informa-tion on using these buttons for each application.

When the AVR remote is being programmed for the codes of another device, these buttons are also used in the “Auto Search” process (See page 44 for more information on programming the remote.)

E‹ Button: This button is used to change the menu selection or setting during some of the setup procedures for the AVR.

FSet Button: This button is used to enter settings into the AVR 8500´s memory, to select a submenu from the main menu or to return from submenus. It is also used in the setup proce- dures (without the use of the on screen menus) for delay, speaker configuration and channel output level adjustment.

GDigital Select: Press this button to assign

one of the digital inputs *Óto a source. (See page 35 for more information on using digital inputs.)

MAIN REMOTE CONTROL FUNCTIONS 11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents AVR 8500 Audio/ Video Receiver Power for the Digital RevolutionDeclaration of Conformity Table of ContentsIntroduction Description and FeaturesIntroduction Hdcd Decoding for Superb CD PlaybackUnpacking Safety InformationImportant Safety Information Front Panel Controls Power Indicator #Preset Station SelectorHeadphone Jack $Stereo Mode Selector /› Button Home THX Mode Selector Press thisCoaxial Ó DTS-ES 6.1 Discrete DTS-ES 6.1 MatrixDTS + NEO6 To select between the OpticalFront Panel Information Display Multi Indicator Auto IndicatorFront Panel Information Display Rear Panel Connections Rear Panel ConnectionsChannel Direct Inputs If an external Unswitched Outlet Surround Mode Selector Power Off ButtonProgram/SPL Indicator Power On ButtonChannel Direct Inputs Main Remote Control FunctionsMain Remote Control Functions Main Remote Control Functions ∆ Play Forward/Reverse/Stop ˚ Mute Zone II Remote Control FunctionsVideo Equipment Connections Installation and ConnectionsAudio Equipment Connections Important Note for Adapter Cables Scart A/V ConnectionsComponent Video Inputs . Note that even Video Connection NotesAlso other colours possible, e.g. brown and grey Important Note for the Use SCART-Cinch AdaptersSystem and Power Connections Speaker Selection Speaker PlacementAC Power Connection First Turn On System ConfigurationUsing the On-Screen Display System ConfigurationInput Setup Front panel or Speaker Setup¤ Button Dto begin the speaker configura- tion process Optional, external power amplifiersOn the remote so that Sublfe appears in the on-screen menu SurroundSubwoofer THX Surround EX and DTS Surround SetupWithin five seconds, either press ⁄/¤ buttons Delay Settings Settings Independent of the Input SelectedAdjustments for Other Inputs To select the DOLBYmenu see fig Night Mode SettingsOutput Level Adjustment On the remote. Then press the ⁄/¤ buttonsSo that on is highlighted Using EzSetPress and hold the SPL Indicator Select Turn off the OSD system if it is in useMenu Sensor and Indicator offWhen all channels have the same output level Bass Peak Limiter Operation Surround Mode ChartOFF Stereo Dolby 3 StereoTheater HallSource Selection Controls and Use of HeadphonesBasic Operation Until Surr OFF appears in the Main Information Display ˆ Surround Mode SelectionOne of the most important features Digital Audio PlaybackMP3 Audio Playback Dolby DigitalDolby Digital Surround EX PCM Audio PlaybackSelecting a Digital Source Digital Bitstream IndicatorsOFF Speaker/Channel IndicatorsEand adjust to accommodate it Tape Recording Output Level Adjustment With Source SignalsIndicator Select Indicator offWill not function Memory BackupChannel/8-Channel Direct Input To change the output levelAdvanced Features Advanced FeaturesSpeaker Reset Turn On Volume LevelFull-OSD Time Out Adjustment Semi-OSD SettingsMultiroom Operation InstallationMultiroom Setup Multiroom OperationBasic Tuner Operation Tuner OperationRDS Operation Auto-Search Method Time. When the Program/SPL IndicatorProgramming the Remote with Codes Direct Code EntryErasing Learned Codes Programming the RemoteCode Readout Learning Codes from a RemotePress the AVR Selector Erasing Macro CommandsMacro Programming 4and the Mute button Volume Punch-ThroughProgrammed Device Functions Remote With Other DevicesSelector button Channel Control Punch-ThroughResetting the Remote Memory Function List Function ListPrev Channel 1 2 3 4 5 6 7 Clear Power On Power Off Mute TV Select Channel +Power On Power Off VID 3 Select Channel + Scan Scan + Rewind Play Fast Fwd Record Stop PauseTroubleshooting Guide Troubleshooting GuideProcessor Reset Technical Specifications Harman Consumer International

AVR 8500 specifications

The Harman-Kardon AVR 8500 is a high-performance audio/video receiver designed for enthusiasts who demand exceptional sound quality and advanced features. This model is part of the premium AVR line and has become a respected staple in home theater setups since its introduction.

One of the standout features of the AVR 8500 is its robust amplification system. With a powerful output of 120 watts per channel, it drives even the most demanding speakers and ensures a dynamic audio experience. The receiver supports a variety of surround sound formats, including Dolby Digital, Dolby Pro Logic II, DTS, and THX Surround EX, delivering an immersive listening experience for movies, games, and music.

The AVR 8500 also showcases a range of advanced processing technologies that enhance audio fidelity. Harman-Kardon’s proprietary Logic 7 processing allows for the seamless upmixing of stereo content to surround sound, providing a richer soundscape. Additionally, the integration of the latest HDMI inputs ensures that high-definition audio and video signals can be transmitted without degradation in quality. This model typically includes multiple HDMI ports, along with support for 4K video passthrough, making it an ideal choice for modern home theater configurations.

In terms of connectivity, the AVR 8500 offers versatility, featuring multiple analog and digital audio inputs, a variety of video connections, and even network capabilities for streaming music from popular services directly. The receiver often comes equipped with advanced room correction technologies, such as Harman’s proprietary room setup and calibration system, which helps to optimize sound quality based on the specific characteristics of your listening environment.

Another notable characteristic of the Harman-Kardon AVR 8500 is its user-friendly interface. The intuitive on-screen setup allows users to easily configure their audio and video settings, making it accessible not only for seasoned audiophiles but also for those new to home theater systems.

A sleek design further complements its high-performance capabilities, ensuring that the AVR 8500 not only performs well but also looks great in any entertainment setup. The combination of its advanced technological features, extensive connectivity options, and impressive sound quality makes the Harman-Kardon AVR 8500 a premier choice for anyone seeking to elevate their home audio experience.
Top Page Image Contents