Harman-Kardon AVR 8500 owner manual Rear Panel Connections, Channel Direct Inputs If an external

Page 8

Rear Panel Connections

 

34

33

 

23

25

28

 

27

32

10

 

 

12

8

30

24

29

31

 

9

 

26

15

 

 

 

 

 

 

 

 

 

 

 

 

17

¡

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

18

™

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

19

 

 

 

 

 

 

 

 

 

 

 

 

230V/50Hz

¢

16

6

 

6

 

6

13

21

 

22

 

14

 

14

5

11

 

11

7

3

 

20

 

16

 

AM Antenna

FM Antenna

Tape Inputs

Tape Outputs

Subwoofer Output

Amplifier Inputs

CD Inputs

Multiroom Outputs

6-Channel Direct Inputs

8-Channel Direct Inputs

Preamp Outputs

Video Monitor Outputs

NOTE: To assist in making the correct connec- tions for multichannel input/output and speaker connections, all connection jacks and terminals have been color coded in conformance with the latest CEA standards as follows:

Front Left:

White

Front Right:

Red

Center:

Green

Surround Left:

Blue

Surround Right:

Gray

Surround Back Left:

Brown

Surround Back Right:

Tan

Subwoofer (LFE):

Purple

Digital Audio:

Orange

Composite Video:

Yellow

Component Video “Y”:

Green

Component Video “Pr”:

Red

Component Video “Pb”:

Blue

AM Antenna: Connect the AM loop antenna supplied with the receiver to these terminals. If an external AM antenna is used, make connections to the AM and GND terminals in accordance with the instructions supplied with the antenna.

Surround Back Preamp Outputs Front Speaker Outputs Center Speaker Outputs Surround Speaker Outputs Switched AC Accessory Outlet Unswitched AC Accessory Outlet AC Power Cord

Video 1/Video 2 Component Video Inputs Monitor Component Video Outputs DVD Component Video Inputs

Remote IR Output

Remote IR Input

FM Antenna: Connect the supplied indoor or an optional external FM antenna to this terminal.

Tape Inputs: Connect these jacks to the PLAY/OUT jacks of an audio recorder.

Tape Outputs: Connect these jacks to the RECORD/INPUT jacks of an audio recorder.

Subwoofer Output: Connect this jack to the line-level input of a powered subwoofer. If an external subwoofer amplifier is used, connect this jack to the subwoofer amplifier input.

Amplifier Inputs: When the jumper pins that link the Preamp Outputs with these inputs are removed, these jacks may be used to connect an external source or the AVR’s multi- room system to the internal amplifiers.

Multiroom IR Input

Coaxial Digital Audio Output

Optical Digital Audio Output

DVD Inputs

Amplifier Trigger Jack

Video 1/Video 2 Inputs

Optical Digital Inputs

Coaxial Digital Inputs

Video 3/Video 4 Inputs

Video 1/Video 2 Outputs

CD Inputs: Connect these jacks to the ana- log output of a compact disc player or CD chang- er or any other audio source.

Multiroom Outputs: Connect these jacks to an optional audio power amplifier and moni- tor to listen and watch to the source selected by the multiroom system in a remote room.

6-Channel Direct Inputs: If an external

digital audio decoder (DVD Audio, SACD) is used, connect the outputs of that decoder to these jacks.

8-Channel Direct Inputs: When an op- tional, external processor or playback device with

6.1or 7.1 audio capability (DVD Audio, SACD) is in use, connect the Surround Back Left and Surround Back Right channel outputs of the play- er to these input jacks and all other 6.1/7.1 out- puts to the appropriate 6-Channel Direct Inputs .

8REAR PANEL CONNECTIONS

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Power for the Digital Revolution AVR 8500 Audio/ Video ReceiverTable of Contents Declaration of ConformityDescription and Features IntroductionHdcd Decoding for Superb CD Playback IntroductionUnpacking Safety InformationImportant Safety Information Power Indicator #Preset Station Selector Headphone Jack $Stereo Mode Selector /› ButtonHome THX Mode Selector Press this Front Panel ControlsDTS-ES 6.1 Discrete DTS-ES 6.1 Matrix DTS + NEO6To select between the Optical Coaxial ÓFront Panel Information Display Multi Indicator Auto IndicatorFront Panel Information Display Rear Panel Connections Rear Panel ConnectionsChannel Direct Inputs If an external Unswitched Outlet Power Off Button Program/SPL IndicatorPower On Button Surround Mode SelectorMain Remote Control Functions Channel Direct InputsMain Remote Control Functions Main Remote Control Functions Zone II Remote Control Functions ∆ Play Forward/Reverse/Stop ˚ MuteVideo Equipment Connections Installation and ConnectionsAudio Equipment Connections Scart A/V Connections Component Video Inputs . Note that evenVideo Connection Notes Important Note for Adapter CablesImportant Note for the Use SCART-Cinch Adapters Also other colours possible, e.g. brown and greySystem and Power Connections Speaker Selection Speaker PlacementAC Power Connection System Configuration Using the On-Screen DisplaySystem Configuration First Turn OnInput Setup Speaker Setup ¤ Button Dto begin the speaker configura- tion processOptional, external power amplifiers Front panel orOn the remote so that Sublfe appears in the on-screen menu SurroundSubwoofer THX Surround EX and DTS Surround SetupWithin five seconds, either press ⁄/¤ buttons Delay Settings Settings Independent of the Input SelectedAdjustments for Other Inputs Night Mode Settings Output Level AdjustmentOn the remote. Then press the ⁄/¤ buttons To select the DOLBYmenu see figUsing EzSet Press and hold the SPL Indicator SelectTurn off the OSD system if it is in use So that on is highlightedMenu Sensor and Indicator offWhen all channels have the same output level Bass Peak Limiter Surround Mode Chart OperationDolby 3 Stereo TheaterHall OFF StereoSource Selection Controls and Use of HeadphonesBasic Operation Surround Mode Selection One of the most important featuresDigital Audio Playback Until Surr OFF appears in the Main Information Display ˆDolby Digital Dolby Digital Surround EXPCM Audio Playback MP3 Audio PlaybackDigital Bitstream Indicators Selecting a Digital SourceOFF Speaker/Channel IndicatorsEand adjust to accommodate it Output Level Adjustment With Source Signals Indicator SelectIndicator off Tape RecordingMemory Backup Channel/8-Channel Direct InputTo change the output level Will not functionAdvanced Features Speaker ResetTurn On Volume Level Advanced FeaturesSemi-OSD Settings Full-OSD Time Out AdjustmentInstallation Multiroom SetupMultiroom Operation Multiroom OperationTuner Operation Basic Tuner OperationRDS Operation Time. When the Program/SPL Indicator Programming the Remote with CodesDirect Code Entry Auto-Search MethodProgramming the Remote Code ReadoutLearning Codes from a Remote Erasing Learned CodesPress the AVR Selector Erasing Macro CommandsMacro Programming Volume Punch-Through Programmed Device FunctionsRemote With Other Devices 4and the Mute buttonChannel Control Punch-Through Selector buttonResetting the Remote Memory Function List Function ListPower On Power Off Mute TV Select Channel + Power On Power Off VID 3 Select Channel +Scan Scan + Rewind Play Fast Fwd Record Stop Pause Prev Channel 1 2 3 4 5 6 7 ClearTroubleshooting Guide Troubleshooting GuideProcessor Reset Technical Specifications Harman Consumer International

AVR 8500 specifications

The Harman-Kardon AVR 8500 is a high-performance audio/video receiver designed for enthusiasts who demand exceptional sound quality and advanced features. This model is part of the premium AVR line and has become a respected staple in home theater setups since its introduction.

One of the standout features of the AVR 8500 is its robust amplification system. With a powerful output of 120 watts per channel, it drives even the most demanding speakers and ensures a dynamic audio experience. The receiver supports a variety of surround sound formats, including Dolby Digital, Dolby Pro Logic II, DTS, and THX Surround EX, delivering an immersive listening experience for movies, games, and music.

The AVR 8500 also showcases a range of advanced processing technologies that enhance audio fidelity. Harman-Kardon’s proprietary Logic 7 processing allows for the seamless upmixing of stereo content to surround sound, providing a richer soundscape. Additionally, the integration of the latest HDMI inputs ensures that high-definition audio and video signals can be transmitted without degradation in quality. This model typically includes multiple HDMI ports, along with support for 4K video passthrough, making it an ideal choice for modern home theater configurations.

In terms of connectivity, the AVR 8500 offers versatility, featuring multiple analog and digital audio inputs, a variety of video connections, and even network capabilities for streaming music from popular services directly. The receiver often comes equipped with advanced room correction technologies, such as Harman’s proprietary room setup and calibration system, which helps to optimize sound quality based on the specific characteristics of your listening environment.

Another notable characteristic of the Harman-Kardon AVR 8500 is its user-friendly interface. The intuitive on-screen setup allows users to easily configure their audio and video settings, making it accessible not only for seasoned audiophiles but also for those new to home theater systems.

A sleek design further complements its high-performance capabilities, ensuring that the AVR 8500 not only performs well but also looks great in any entertainment setup. The combination of its advanced technological features, extensive connectivity options, and impressive sound quality makes the Harman-Kardon AVR 8500 a premier choice for anyone seeking to elevate their home audio experience.
Top Page Image Contents