Harman-Kardon AVR 8500 owner manual Important Safety Information, Unpacking

Page 4

Safety Information

Important Safety Information

Verify Line Voltage Before Use

Your AVR has been designed for use with

220-240-Volt AC current. Connection to a line voltage other than that for which it is intended can create a safety and fire hazard and may damage the unit.

If you have any questions about the voltage requirements for your specific model, or about the line voltage in your area, contact your dealer before plugging the unit into a wall outlet.

Do Not Use Extension Cords

To avoid safety hazards, use only the power cord attached to your unit. We do not recommend that extension cords be used with this product. As with all electrical devices, do not run power cords under rugs or carpets or place heavy objects on them. Damaged power cords should be replaced immediately by an authorized service depot with a cord meeting factory specifications.

Handle the AC Power Cord Gently

When disconnecting the power cord from an AC outlet, always pull the plug, never pull the cord. If you do not intend to use the unit for any con- siderable length of time, disconnect the plug from the AC outlet.

Do Not Open the Cabinet

There are no user-serviceable components inside this product. Opening the cabinet may present a shock hazard, and any modification to the product will void your guarantee. If water or any metal object such as a paper clip, wire or a staple accidentally falls inside the unit, disconnect it from the AC power source immediately, and consult an authorized service station.

Installation Location

■To assure proper operation and to avoid the potential for safety hazards, place the unit on a firm and level surface. When placing the unit on a shelf, be certain that the shelf and any mounting hardware can support the weight of the product.

■Make certain that proper space is provided both above and below the unit for ventilation. If this product will be installed in a cabinet or other enclosed area, make certain that there is sufficient air movement within the cabinet. Under some circumstances a fan may be required.

■Do not place the unit directly on a carpeted surface.

■Avoid installation in extremely hot or cold locations, or an area that is exposed to direct sunlight or heating equipment.

■Avoid moist or humid locations.

■Do not obstruct the ventilation slots on the top of the unit, or place objects directly over them.

Cleaning

When the unit gets dirty, wipe it with a clean, soft, dry cloth. If necessary, wipe it with a soft cloth dampened with mild soapy water, then a fresh cloth with clean water. Wipe dry immediately with a dry cloth. NEVER use benzene, aerosol cleaners, thinner, alcohol or any other volatile cleaning agent. Do not use abrasive cleaners, as they may damage the finish of metal parts. Avoid spraying insecticide near the unit.

Moving the Unit

Before moving the unit, be certain to disconnect any interconnection cords with other components, and make certain that you disconnect the unit from the AC outlet.

Unpacking

The carton and shipping materials used to protect your new receiver during shipment were specially designed to cushion it from shock and vibration. We suggest that you save the carton and packing materials for use in shipping if you move, or should the unit ever need repair.

To minimize the size of the carton in storage, you may wish to flatten it. This is done by carefully slitting the tape seams on the bottom and collapsing the carton. Other cardboard inserts may be stored in the same manner. Packing materials that cannot be collapsed should be saved along with the carton in a plastic bag.

If you do not wish to save the packaging materials, please note that the carton and other sections of the shipping protection are recyclable. Please respect the environment and discard those materials at a local recycling center.

4SAFETY INFORMATION

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Power for the Digital Revolution AVR 8500 Audio/ Video ReceiverTable of Contents Declaration of ConformityDescription and Features IntroductionHdcd Decoding for Superb CD Playback IntroductionImportant Safety Information Safety InformationUnpacking Power Indicator #Preset Station Selector Headphone Jack $Stereo Mode Selector /› ButtonHome THX Mode Selector Press this Front Panel ControlsDTS-ES 6.1 Discrete DTS-ES 6.1 Matrix DTS + NEO6To select between the Optical Coaxial ÓFront Panel Information Display Multi Indicator Auto IndicatorFront Panel Information Display Channel Direct Inputs If an external Rear Panel ConnectionsRear Panel Connections Unswitched Outlet Power Off Button Program/SPL IndicatorPower On Button Surround Mode SelectorMain Remote Control Functions Channel Direct InputsMain Remote Control Functions Main Remote Control Functions Zone II Remote Control Functions ∆ Play Forward/Reverse/Stop ˚ MuteAudio Equipment Connections Installation and ConnectionsVideo Equipment Connections Scart A/V Connections Component Video Inputs . Note that evenVideo Connection Notes Important Note for Adapter CablesImportant Note for the Use SCART-Cinch Adapters Also other colours possible, e.g. brown and greySystem and Power Connections AC Power Connection Speaker PlacementSpeaker Selection System Configuration Using the On-Screen DisplaySystem Configuration First Turn OnInput Setup Speaker Setup ¤ Button Dto begin the speaker configura- tion processOptional, external power amplifiers Front panel orSubwoofer SurroundOn the remote so that Sublfe appears in the on-screen menu Within five seconds, either press ⁄/¤ buttons Surround SetupTHX Surround EX and DTS Adjustments for Other Inputs Settings Independent of the Input SelectedDelay Settings Night Mode Settings Output Level AdjustmentOn the remote. Then press the ⁄/¤ buttons To select the DOLBYmenu see figUsing EzSet Press and hold the SPL Indicator SelectTurn off the OSD system if it is in use So that on is highlightedWhen all channels have the same output level Sensor and Indicator offMenu Bass Peak Limiter Surround Mode Chart OperationDolby 3 Stereo TheaterHall OFF StereoBasic Operation Controls and Use of HeadphonesSource Selection Surround Mode Selection One of the most important featuresDigital Audio Playback Until Surr OFF appears in the Main Information Display ˆDolby Digital Dolby Digital Surround EXPCM Audio Playback MP3 Audio PlaybackDigital Bitstream Indicators Selecting a Digital SourceEand adjust to accommodate it Speaker/Channel IndicatorsOFF Output Level Adjustment With Source Signals Indicator SelectIndicator off Tape RecordingMemory Backup Channel/8-Channel Direct InputTo change the output level Will not functionAdvanced Features Speaker ResetTurn On Volume Level Advanced FeaturesSemi-OSD Settings Full-OSD Time Out AdjustmentInstallation Multiroom SetupMultiroom Operation Multiroom OperationTuner Operation Basic Tuner OperationRDS Operation Time. When the Program/SPL Indicator Programming the Remote with CodesDirect Code Entry Auto-Search MethodProgramming the Remote Code ReadoutLearning Codes from a Remote Erasing Learned CodesMacro Programming Erasing Macro CommandsPress the AVR Selector Volume Punch-Through Programmed Device FunctionsRemote With Other Devices 4and the Mute buttonChannel Control Punch-Through Selector buttonResetting the Remote Memory Function List Function ListPower On Power Off Mute TV Select Channel + Power On Power Off VID 3 Select Channel +Scan Scan + Rewind Play Fast Fwd Record Stop Pause Prev Channel 1 2 3 4 5 6 7 ClearProcessor Reset Troubleshooting GuideTroubleshooting Guide Technical Specifications Harman Consumer International

AVR 8500 specifications

The Harman-Kardon AVR 8500 is a high-performance audio/video receiver designed for enthusiasts who demand exceptional sound quality and advanced features. This model is part of the premium AVR line and has become a respected staple in home theater setups since its introduction.

One of the standout features of the AVR 8500 is its robust amplification system. With a powerful output of 120 watts per channel, it drives even the most demanding speakers and ensures a dynamic audio experience. The receiver supports a variety of surround sound formats, including Dolby Digital, Dolby Pro Logic II, DTS, and THX Surround EX, delivering an immersive listening experience for movies, games, and music.

The AVR 8500 also showcases a range of advanced processing technologies that enhance audio fidelity. Harman-Kardon’s proprietary Logic 7 processing allows for the seamless upmixing of stereo content to surround sound, providing a richer soundscape. Additionally, the integration of the latest HDMI inputs ensures that high-definition audio and video signals can be transmitted without degradation in quality. This model typically includes multiple HDMI ports, along with support for 4K video passthrough, making it an ideal choice for modern home theater configurations.

In terms of connectivity, the AVR 8500 offers versatility, featuring multiple analog and digital audio inputs, a variety of video connections, and even network capabilities for streaming music from popular services directly. The receiver often comes equipped with advanced room correction technologies, such as Harman’s proprietary room setup and calibration system, which helps to optimize sound quality based on the specific characteristics of your listening environment.

Another notable characteristic of the Harman-Kardon AVR 8500 is its user-friendly interface. The intuitive on-screen setup allows users to easily configure their audio and video settings, making it accessible not only for seasoned audiophiles but also for those new to home theater systems.

A sleek design further complements its high-performance capabilities, ensuring that the AVR 8500 not only performs well but also looks great in any entertainment setup. The combination of its advanced technological features, extensive connectivity options, and impressive sound quality makes the Harman-Kardon AVR 8500 a premier choice for anyone seeking to elevate their home audio experience.
Top Page Image Contents