Harman-Kardon Explore the Features and Specifications of Harman Kardon AVR 8500
Page 53

Technical Specifications

Audio Section

Stereo Mode

Continuous Average Power (FTC)

125 Watts per channel, 20Hz–20kHz,

@ < 0.07% THD, both channels driven into 8 ohms

Five-Channel Surround Modes

Power Per Individual Channel

Front L&R channels:

110 Watts per channel,

@ < 0.07% THD, 20Hz–20kHz into 8 ohms

Center channel:

110 Watts, @ < 0.07% THD, 20Hz–20kHz into 8 ohms

Surround channels:

110 Watts per channel,

@ < 0.07% THD, 20Hz–20kHz into 8 ohms

Input Sensitivity/Impedance

 

Linear (High Level)

200mV/47kohms

Signal-to-Noise Ratio (IHF-A)

95dB

Surround System Adjacent Channel Separation

Analog Decoding

40dB

(Pro Logic, etc.)

 

Dolby Digital (AC-3)

55dB

DTS

55dB

Frequency Response

 

@ 1W (+0dB, –3dB)

10Hz– 100kHz

High Instantaneous

 

Current Capability (HCC)

±85 Amps

Transient Intermodulation

 

Distortion (TIM)

Unmeasurable

Rise Time

16 µsec

Slew Rate

40V/µsec**

FM Tuner Section

 

Frequency Range

87.5 –108MHz

Usable Sensitivity

IHF 1.3 µV/13.2dBf

Signal-to-Noise Ratio

Mono/Stereo: 70/65dB (DIN)

Distortion

Mono/Stereo: 0.15/0.3%

Stereo Separation

35dB @ 1kHz

Selectivity

±300kHz: 65dB

Image Rejection

80dB

IF Rejection

90dB

AM Tuner Section

 

Frequency Range

522–1611kHz

Signal-to-Noise Ratio

45dB

Usable Sensitivity

Loop: 500µV

Distortion

1kHz, 50% Mod: 0.8%

Selectivity

±9kHz: 30dB

Video Section

 

Video Format

PAL/NTSC

Input Level/Impedance

1Vp-p/75 ohms

Output Level/Impedance

1Vp-p/75 ohms

Video Frequency Response

 

(Composite and S-Video)

10Hz–8MHz (–3dB)

Video Frequency

 

Response (Component)

10Hz-35MHz (-3dB)

General

 

Power Requirement

AC 220-240V/50Hz

Power Consumption

119W idle, 694W maximum

 

(2-channel driven)

Trigger Output

6V DC @ 500mA

Dimensions (Max)

 

Width

440mm

Height

196mm

Depth

519mm

Weight

24.1 kg

Depth measurement includes knobs, buttons and terminal connections. Height measurement includes feet and chassis.

All features and specifications are subject to change without notice.

Harman Kardon is a registered trademark, and Power for the digital revolution is a trademark, of Harman International Industries, Inc.

TM is a trademark of Harman International Industries, Inc. (Patent No. 5,386,478).

*Manufactured under license from Dolby Laboratories.

“Dolby,” “Pro Logic,” “Pro Logic II” and the Double-D symbol are trademarks of Dolby Laboratories. Confidential Unpublished Works. ©1992–1999 Dolby Laboratories, Inc. All rights reserved.

DTS and DTS Surround, DTS-ES and DTS Neo:6 are trademarks of Digital Theater Systems, Inc.

THX and THX Ultra are manufactured under license from Lucasfilm Ltd., Lucasfilm, THX and THX Ultra are registered trademarks of Lucasfilm Ltd.

Surround EX is a jointly developed technology of THX and Dolby Laboratories, Inc., and is a trademark of Dolby. Used under authorization.

VMAx is a trademark of Harman International Industries, Inc., and is an implementation of Cooper Bauck Transaural Stereo under patent license.

Logic 7 is a registered trademark of Lexicon, Inc.

Crystal is a registered trademark of Cirrus Logic Corp.

HDCD is a registered trademark of Pacific Microsonics, Inc.

**Without input anti slewing and output isolation networks.

TECHNICAL SPECIFICATIONS 53

Page 52 Page 54
Image 53
Page 52 Page 54
Contents AVR 8500 Audio/ Video Receiver Power for the Digital RevolutionDeclaration of Conformity Table of ContentsIntroduction Description and FeaturesHdcd Decoding for Superb CD Playback IntroductionUnpacking Safety InformationImportant Safety Information Headphone Jack $Stereo Mode Selector /› Button Power Indicator #Preset Station SelectorHome THX Mode Selector Press this Front Panel ControlsDTS + NEO6 DTS-ES 6.1 Discrete DTS-ES 6.1 MatrixTo select between the Optical Coaxial ÓFront Panel Information Display Multi Indicator Auto IndicatorFront Panel Information Display Rear Panel Connections Rear Panel ConnectionsChannel Direct Inputs If an external Unswitched Outlet Program/SPL Indicator Power Off ButtonPower On Button Surround Mode SelectorChannel Direct Inputs Main Remote Control FunctionsMain Remote Control Functions Main Remote Control Functions ∆ Play Forward/Reverse/Stop ˚ Mute Zone II Remote Control FunctionsVideo Equipment Connections Installation and ConnectionsAudio Equipment Connections Component Video Inputs . Note that even Scart A/V ConnectionsVideo Connection Notes Important Note for Adapter CablesAlso other colours possible, e.g. brown and grey Important Note for the Use SCART-Cinch AdaptersSystem and Power Connections Speaker Selection Speaker PlacementAC Power Connection Using the On-Screen Display System ConfigurationSystem Configuration First Turn OnInput Setup ¤ Button Dto begin the speaker configura- tion process Speaker SetupOptional, external power amplifiers Front panel orOn the remote so that Sublfe appears in the on-screen menu SurroundSubwoofer THX Surround EX and DTS Surround SetupWithin five seconds, either press ⁄/¤ buttons Delay Settings Settings Independent of the Input SelectedAdjustments for Other Inputs Output Level Adjustment Night Mode SettingsOn the remote. Then press the ⁄/¤ buttons To select the DOLBYmenu see figPress and hold the SPL Indicator Select Using EzSetTurn off the OSD system if it is in use So that on is highlightedMenu Sensor and Indicator offWhen all channels have the same output level Bass Peak Limiter Operation Surround Mode ChartTheater Dolby 3 StereoHall OFF StereoSource Selection Controls and Use of HeadphonesBasic Operation One of the most important features Surround Mode SelectionDigital Audio Playback Until Surr OFF appears in the Main Information Display ˆDolby Digital Surround EX Dolby DigitalPCM Audio Playback MP3 Audio PlaybackSelecting a Digital Source Digital Bitstream IndicatorsOFF Speaker/Channel IndicatorsEand adjust to accommodate it Indicator Select Output Level Adjustment With Source SignalsIndicator off Tape RecordingChannel/8-Channel Direct Input Memory BackupTo change the output level Will not functionSpeaker Reset Advanced FeaturesTurn On Volume Level Advanced FeaturesFull-OSD Time Out Adjustment Semi-OSD SettingsMultiroom Setup InstallationMultiroom Operation Multiroom OperationBasic Tuner Operation Tuner OperationRDS Operation Programming the Remote with Codes Time. When the Program/SPL IndicatorDirect Code Entry Auto-Search MethodCode Readout Programming the RemoteLearning Codes from a Remote Erasing Learned CodesPress the AVR Selector Erasing Macro CommandsMacro Programming Programmed Device Functions Volume Punch-ThroughRemote With Other Devices 4and the Mute buttonSelector button Channel Control Punch-ThroughResetting the Remote Memory Function List Function ListPower On Power Off VID 3 Select Channel + Power On Power Off Mute TV Select Channel +Scan Scan + Rewind Play Fast Fwd Record Stop Pause Prev Channel 1 2 3 4 5 6 7 ClearTroubleshooting Guide Troubleshooting GuideProcessor Reset Technical Specifications Harman Consumer International

AVR 8500 specifications

The Harman-Kardon AVR 8500 is a high-performance audio/video receiver designed for enthusiasts who demand exceptional sound quality and advanced features. This model is part of the premium AVR line and has become a respected staple in home theater setups since its introduction.

One of the standout features of the AVR 8500 is its robust amplification system. With a powerful output of 120 watts per channel, it drives even the most demanding speakers and ensures a dynamic audio experience. The receiver supports a variety of surround sound formats, including Dolby Digital, Dolby Pro Logic II, DTS, and THX Surround EX, delivering an immersive listening experience for movies, games, and music.

The AVR 8500 also showcases a range of advanced processing technologies that enhance audio fidelity. Harman-Kardon’s proprietary Logic 7 processing allows for the seamless upmixing of stereo content to surround sound, providing a richer soundscape. Additionally, the integration of the latest HDMI inputs ensures that high-definition audio and video signals can be transmitted without degradation in quality. This model typically includes multiple HDMI ports, along with support for 4K video passthrough, making it an ideal choice for modern home theater configurations.

In terms of connectivity, the AVR 8500 offers versatility, featuring multiple analog and digital audio inputs, a variety of video connections, and even network capabilities for streaming music from popular services directly. The receiver often comes equipped with advanced room correction technologies, such as Harman’s proprietary room setup and calibration system, which helps to optimize sound quality based on the specific characteristics of your listening environment.

Another notable characteristic of the Harman-Kardon AVR 8500 is its user-friendly interface. The intuitive on-screen setup allows users to easily configure their audio and video settings, making it accessible not only for seasoned audiophiles but also for those new to home theater systems.

A sleek design further complements its high-performance capabilities, ensuring that the AVR 8500 not only performs well but also looks great in any entertainment setup. The combination of its advanced technological features, extensive connectivity options, and impressive sound quality makes the Harman-Kardon AVR 8500 a premier choice for anyone seeking to elevate their home audio experience.
Top Page Image Contents