Harman-Kardon AVR 8500 owner manual Surround, Subwoofer

Page 23

System Configuration

5. Press the ‹/› Buttons E on the remote to select the option that best describes your center speaker, based on the speaker definitions shown below.

When SMALLis selected, low-frequency center channel sounds will be sent to the Fronts, if they are set to LARGEand Sub is turned off (see below). When Sub is on, low frequency cen- ter channel sounds will be sent to the subwoofer only.

When LARGEis selected, a full-range output will be sent to the center speaker output, and NO center channel signal will be sent to the sub- woofer output (except when the Pro Logic II Music mode is in use).

NOTE: If you choose Logic 7 as the surround mode for the particular input source for which you are configuring your speakers, the AVR will not make the LARGE option available for the center speaker. This is due to the requirements of Logic 7 processing, and does not indicate a problem with your receiver.

When NONEis selected, no signals will be sent to the center-channel output. The receiver will operate in a “phantom” center channel mode. Center-channel information will be sent to the left and right front channel outputs and the cen- ter channel bass will be sent to the subwoofer output when SUBL/R+LFEis selected in the SUBWOOFERline in this menu (see below). This mode is needed if no Center speak- er is used. Note that when the Logic 7 Cinema surround mode is selected a Center speaker must be used, the Logic 7 modes Music and Enhance work well without a Center too.

6.When you have completed your selection for the center channel, press the ¤ Button D on the remote to move the cursor to

SURROUND.

7. Press the ‹/› Buttons E on the remote to select the option that best describes the sur- round speakers in your system based on the speaker definitions shown above.

When SMALLis selected, with all digital sur- round modes low-frequency surround channel sounds will be sent to the Fronts when Sub is turned off or to the subwoofer output when Sub is on. With any analog surround mode the rear bass feed depends on the mode selected and the setting of the Sub and front speakers.

When LARGE is selected, a full-range output will be sent to the surround channel outputs (with all analog and digital surround modes), and, except with Hall and Theater modes, NO surround channel bass will be sent to the sub- woofer output.

When NONEis selected, surround-sound infor- mation will be split between the front left and front right outputs. For optimal performance when no surround speakers are in use, the Dolby 3 Stereo mode should be used.

When you are using surround back speakers with your system, press the ¤ Button Don the remote to move the cursor to SURR BACKand set the speaker type for the speak- ers connected to the Surround Back Preamp Outputs through an optional, external power amplifier. The choices and procedure for configuring these speakers are identical to those shown above for the main surround speakers.

8.When you have completed your selection for the surround channels, press the ¤ Button D on the remote to move the cursor to

SUBWOOFER.

9. Press the ‹/› Buttons E on the remote to select the option that best describes your system.

The choices available for the subwoofer position will depend on the settings for the other speak- ers, particularly the front left/right positions.

If the front left/right speakers are set to SMALL, the subwoofer will automatically be set to SUB, which is the “on” position.

If the front left/right speakers are set to LARGE, three options are available:

• If no subwoofer is connected to the AVR, press the ‹/› Buttons E on the remote so that NONEappears in the on-screen menu. When this option is selected, all bass informa- tion will be routed to the front left/right “main” speakers.

•If a subwoofer is connected to the AVR, you have the option to have the front left/right “main” speakers reproduce bass frequencies at all times, and have the subwoofer operate only when the AVR is being used with a digital source that contains a dedicated Low Frequency Effects, or LFE soundtrack. This allows you to use both your main and sub- woofer speakers to take advantage of the spe- cial bass created for certain movies. To select that option press the ‹/› Buttons E

on the remote so that SUB(LFE) appears in the on-screen menu.

•If a subwoofer is connected and you wish to use it for bass reproduction in conjunction with the main front left/right speakers, regard- less of the type of program source or Surround mode you are listening to, press the ‹/›

Buttons E on the remote so that SUB L/R+LFE appears in the on- screen menu. When this option is selected, a full-range signal will be sent to the front left/right “main” speakers, and also to the LFE soundtrack. The subwoofer will receive the front left and right bass frequencies under the crossover frequency selected in the next option setting on this menu, as described below.

10.When you have completed your selection for the subwoofer, press the ¤ Button Don the remote to change the cursor to X-OVER FREQ. The crossover setting may only be adjusted using the on-screen display system.

At this line, you will select the frequency under which bass information is directed to the Subwoofer Output ∞ and above which the remaining signal is directed to all speakers that are set to SMALL. When making these selec- tions, choose the crossover frequency that is closest to the lower frequency limit of your smallest speaker in use. This figure is normally printed in the owner’s manual or data sheet for the speakers; or consult the speaker’s manufac- turer.

•When you use large full range speakers for all channels, able to reproduce bass below 40Hz with sufficient power, choose 40Hz, and LARGEfor all speakers. In this case the sub- woofer will support the front speakers with all frequencies below 40Hz.

•When any of your speakers has been set to SMALL, the crossover frequencies 40Hz or 60Hz should be selected to match typical mid- size speakers, that cannot handle lower fre- quencies with sufficient level. Or select the fre- quencies 80 Hz or 100 Hz to match the typical crossover points of the smaller speakers used in satellite speaker systems. Choose the option that is closest to your speakers’ design. If you are using THX certified speakers throughout your system, the crossover should be set to 80Hz, all speakers set to SMALLand the Subwoofer(s) must be connected.

11.When the crossover frequency selection has been made, press the ¤ Button Dand then the Set Button Fto return to the Main menu.

SYSTEM CONFIGURATION 23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents AVR 8500 Audio/ Video Receiver Power for the Digital RevolutionDeclaration of Conformity Table of ContentsIntroduction Description and FeaturesIntroduction Hdcd Decoding for Superb CD PlaybackUnpacking Safety InformationImportant Safety Information Front Panel Controls Power Indicator #Preset Station SelectorHeadphone Jack $Stereo Mode Selector /› Button Home THX Mode Selector Press thisCoaxial Ó DTS-ES 6.1 Discrete DTS-ES 6.1 MatrixDTS + NEO6 To select between the OpticalFront Panel Information Display Multi Indicator Auto IndicatorFront Panel Information Display Rear Panel Connections Rear Panel ConnectionsChannel Direct Inputs If an external Unswitched Outlet Surround Mode Selector Power Off ButtonProgram/SPL Indicator Power On ButtonChannel Direct Inputs Main Remote Control FunctionsMain Remote Control Functions Main Remote Control Functions ∆ Play Forward/Reverse/Stop ˚ Mute Zone II Remote Control FunctionsVideo Equipment Connections Installation and ConnectionsAudio Equipment Connections Important Note for Adapter Cables Scart A/V ConnectionsComponent Video Inputs . Note that even Video Connection NotesAlso other colours possible, e.g. brown and grey Important Note for the Use SCART-Cinch AdaptersSystem and Power Connections Speaker Selection Speaker PlacementAC Power Connection First Turn On System ConfigurationUsing the On-Screen Display System ConfigurationInput Setup Front panel or Speaker Setup¤ Button Dto begin the speaker configura- tion process Optional, external power amplifiersOn the remote so that Sublfe appears in the on-screen menu SurroundSubwoofer THX Surround EX and DTS Surround SetupWithin five seconds, either press ⁄/¤ buttons Delay Settings Settings Independent of the Input SelectedAdjustments for Other Inputs To select the DOLBYmenu see fig Night Mode SettingsOutput Level Adjustment On the remote. Then press the ⁄/¤ buttonsSo that on is highlighted Using EzSetPress and hold the SPL Indicator Select Turn off the OSD system if it is in useMenu Sensor and Indicator offWhen all channels have the same output level Bass Peak Limiter Operation Surround Mode ChartOFF Stereo Dolby 3 StereoTheater HallSource Selection Controls and Use of HeadphonesBasic Operation Until Surr OFF appears in the Main Information Display ˆ Surround Mode SelectionOne of the most important features Digital Audio PlaybackMP3 Audio Playback Dolby DigitalDolby Digital Surround EX PCM Audio PlaybackSelecting a Digital Source Digital Bitstream IndicatorsOFF Speaker/Channel IndicatorsEand adjust to accommodate it Tape Recording Output Level Adjustment With Source SignalsIndicator Select Indicator offWill not function Memory BackupChannel/8-Channel Direct Input To change the output levelAdvanced Features Advanced FeaturesSpeaker Reset Turn On Volume LevelFull-OSD Time Out Adjustment Semi-OSD SettingsMultiroom Operation InstallationMultiroom Setup Multiroom OperationBasic Tuner Operation Tuner OperationRDS Operation Auto-Search Method Time. When the Program/SPL IndicatorProgramming the Remote with Codes Direct Code EntryErasing Learned Codes Programming the RemoteCode Readout Learning Codes from a RemotePress the AVR Selector Erasing Macro CommandsMacro Programming 4and the Mute button Volume Punch-ThroughProgrammed Device Functions Remote With Other DevicesSelector button Channel Control Punch-ThroughResetting the Remote Memory Function List Function ListPrev Channel 1 2 3 4 5 6 7 Clear Power On Power Off Mute TV Select Channel +Power On Power Off VID 3 Select Channel + Scan Scan + Rewind Play Fast Fwd Record Stop PauseTroubleshooting Guide Troubleshooting GuideProcessor Reset Technical Specifications Harman Consumer International

AVR 8500 specifications

The Harman-Kardon AVR 8500 is a high-performance audio/video receiver designed for enthusiasts who demand exceptional sound quality and advanced features. This model is part of the premium AVR line and has become a respected staple in home theater setups since its introduction.

One of the standout features of the AVR 8500 is its robust amplification system. With a powerful output of 120 watts per channel, it drives even the most demanding speakers and ensures a dynamic audio experience. The receiver supports a variety of surround sound formats, including Dolby Digital, Dolby Pro Logic II, DTS, and THX Surround EX, delivering an immersive listening experience for movies, games, and music.

The AVR 8500 also showcases a range of advanced processing technologies that enhance audio fidelity. Harman-Kardon’s proprietary Logic 7 processing allows for the seamless upmixing of stereo content to surround sound, providing a richer soundscape. Additionally, the integration of the latest HDMI inputs ensures that high-definition audio and video signals can be transmitted without degradation in quality. This model typically includes multiple HDMI ports, along with support for 4K video passthrough, making it an ideal choice for modern home theater configurations.

In terms of connectivity, the AVR 8500 offers versatility, featuring multiple analog and digital audio inputs, a variety of video connections, and even network capabilities for streaming music from popular services directly. The receiver often comes equipped with advanced room correction technologies, such as Harman’s proprietary room setup and calibration system, which helps to optimize sound quality based on the specific characteristics of your listening environment.

Another notable characteristic of the Harman-Kardon AVR 8500 is its user-friendly interface. The intuitive on-screen setup allows users to easily configure their audio and video settings, making it accessible not only for seasoned audiophiles but also for those new to home theater systems.

A sleek design further complements its high-performance capabilities, ensuring that the AVR 8500 not only performs well but also looks great in any entertainment setup. The combination of its advanced technological features, extensive connectivity options, and impressive sound quality makes the Harman-Kardon AVR 8500 a premier choice for anyone seeking to elevate their home audio experience.
Top Page Image Contents