Bissell 18Z6 warranty Visible dirt escaping from cleaner, Possible causes Remedies

Page 17

Troubleshooting

Visible dirt escaping from cleaner

Possible causes

Remedies

1. Dirt container full

1. Empty dirt container

2.Filter or secondary cyclone missing or installed incorrectly

2.Check secondary cyclone, pre-motor and post-motor filter for correct installation

3. Dirt container installed incorrectly

3. Pull out and re-insert dirt container correctly

Other maintenance or service not included in the manual should be performed by an

authorized service representative.

Thank you for selecting a BISSELL product.

If you should happen to need assistance during assembly or operation, call 1-800-263-2535.

Please do not return this product to the store.

For any questions or concerns, BISSELL is happy to be of service.

Contact us directly at 1-800-263-2535.

w w w . b i s s e l l . c a

1 - 8 0 0 - 2 6 3 - 2 5 3 5

17

Image 17 Contents
E R ’ S G U I D E WarrantyThank you for buying a Bissell Lift-OffMultiCyclonic vacuum Important Safety Instructions Product view Assembly How to use this guideAttach handle to vacuum Attach vacuum hose and toolsOperation Power switch/brush switchHandle position Pet TurboBrush snaps on to the holderPlace handle in upright position Power height adjustmentSpecial tools Shoulder Strap select models only Length of the strap may be adjusted as required for comfortTransporting Cleaner Power cord storageTurn vacuum cleaner off O Loop power cord around cord wraps on side of the canisterEmpty dirt container Maintenance and careReplace the Hepa media post-motor filter every six months Empty dirt into garbage containerUnplug the vacuum from electrical outlet Cleaning the pre-motor and post-motor filterUnplug the cleaner from electrical outlet Pulley Unplug cleaner from electrical outletClean debris from the motor pulley and drive belt areas Replace light bulb TurboBrush maintenanceReposition lens and secure with the one screw Unplug vacuum from electrical outletCleaning clogs Refer to the Clearing Clogs section Turn the cleaner OFF O and unplug from electrical outletThermal protector Vacuum cleaner is difficult to push TroubleshootingVacuum cleaner won’t run Possible causes Remedies Visible dirt escaping from cleanerAuthorized service representative M. 10 p.m. ET Bissell consumer serviceStyle SaturdayIf your Bissell product should require service WarrantyLimited Three Year Warranty
Related manuals
Manual 20 pages 28.87 Kb