Operations
ReadyTools™ Continued
11.It is recommended that you suction clean water from the tap to rinse out the hose.
12.Before wrapping hose onto tool rack, lift end of hose and stretch out to ensure all water is cleared from hose.
13.Wrap flex hose around tool rack.
14.Empty
15.If the ReadyTools dial becomes difficult to turn, the diverter assembly that holds the dial may need to be cleaned. To clean, first remove nozzle and locate screw that holds the diverter assembly in place. With a Phillips screwdriver, remove the screw and set aside.
16.Remove diverter assembly; hold under running water making sure water flows through and around the dial. Turn the dial about 10 times clockwise and 10 more times counter clockwise. This should free up any debris.
17.Wipe diverter assembly with a soft cloth and replace back on machine. Replace nozzle.
18.Return ReadyTools dial to "FLOOR CLEANING" setting.
11. 
12.
Run water through here
15.16.
Screw
13
w w w . b i s s e l l . c o m | 8 0 0 . 2 3 7 . 7 6 9 1 |