Maintenance and care
Machine care
For best results, a few simple steps can assure your machine is well maintained after cleaning is complete.
1.Flush your machine of any remaining residual solution.
a.Fill the
b.Plug your machine into a proper outlet and set the ReadyTools dial to the "FLOOR CLEANING" setting. Turn the power on by pressing the power button.
c.Recline the handle and press the spray trigger for 15 seconds while making forward and backward passes on carpet. Release the trigger to suction. Repeat for another 15 seconds. Continue without pressing the trigger until there is no more water being suctioned.
2.Turn power switch off. Unplug the machine and wrap the power cord.
3.After emptying the
4.Replace the
5.Any loose hair or debris can be pulled from the brush roll and thrown away.
6.To clean attachments, remove from hose and rinse in clean, running water. Dry before storing. Clean the hose by suctioning clean water from the tap. Before wrapping back on machine, lift end of hose and stretch out to ensure all water is cleared from hose. Refer to page 13.
7.Wipe the machine’s exterior with a soft cloth.
8.After carpet is dry, vacuum again to remove hair and fuzz.
Machine storage
Store deep cleaner in a protected, dry area (closet or basement). Since this product uses water, it must not be stored where there is dan- ger of freezing. Freezing will damage internal components and void the warranty.
WARNING:
To reduce the risk of fire, electric shock or injury, unplug from the out- let before servicing.
Lint Screen
15
w w w . b i s s e l l . c o m | 8 0 0 . 2 3 7 . 7 6 9 1 |