GE 71722 warranty Solution Release Trigger

Page 14

How to Use the Carpet Shampooer/Extractor for Upholstery and Stair Cleaning (continued)

Solution

Release

Trigger

C.Place the Upholstery Nozzle at the top of the cleaning area.

D.Pull up and hold the solution release trigger and pull the nozzle backward at a moderate pace.

E.Release the trigger at the end of the stroke.

F.Lift nozzle and start again at the top. Apply one to three spraying strokes. Avoid over-soaking the area.

NOTE: As the nozzle moves over the surface, the cleaning solution sprays onto the surface. At the same time the nozzle picks up the dirty water and places it in the recovery tank.

G.Move the nozzle over the surface several more times without engaging the trigger. This removes excess water and helps the surface dry faster.

H.Brush roll does not rotate when cleaning in the attachment mode.

NOTE: If the cleaning solution and water are not released from the upholstery/stair nozzle, there may be an air lock. With unit in the Off position, raise the attachment handle above your head. Then engage the attachment handle trigger for 4 seconds. Turn unit On to resume spraying.

NOTE: If you should encounter a clog in the Upholstery/Stair Nozzle Filter:

1)Remove the “M” shaped piece on the underside of the Upholstery/Stair Nozzle (Use a small screwdriver to pry loose).

2)Clear and rinse any debris from the “M” shaped piece by placing it under running water.

3) Replace the “M” shaped piece into the solution tube then position and lock the piece into place.

Solution Tube

“M” Shaped Piece

Trigger

14

Image 14

Contents Owner’s Guide Model Cleaner Safety Important SafeguardsGrounding Instructions Instructions Visant LA Mise À TerreRating Plate General InformationCustomer Assistance Carpet Shampooer/Extractor Parts Attach Handle How To AssembleCheck Recovery Tank Store Attachment HoseVacuum Carpet Preparing Carpet Before CleaningAfter Cleaning Fill the Clean Water Solution Tank Automatic Shut-Off Emptying the Recovery TankRecovery Tank How To Use The Carpet Shampooer/Extractor Carpet CleaningOperating The Carpet Shampooer/Extractor Transporting the Carpet Shampooer/ExtractorVacuum Upholstery or Stairs Test clean a hidden areaFabric Code Ratings Check the stuffing material if possibleCleaning Solution Release Trigger Recovery Tank Maintenance How To Maintain The Carpet Shampooer/ ExtractorClean Water Solution Tank Maintenance Plunger, Boot Seal and Filter Assembly How To MaintainCleaning the Carpet Shampooer/Extractor’s Suction Cover How to Replace the Carpet Shampooer/Extractor’s Belt Placing the handle on the floorProblem Solving Cause Solution Authorized Appliance Parts Two-Year Limited Warranty Customer AssistanceGuía del propietario Modelo Puntos de Seguridad Importante Para SU SeguridadInstrucciones para la conexión de corriente a tierra PeligroInformación sobre la placa de datos Información GeneralAyuda al cliente Partes de la lavadora/exractora Guarde la manguera incluida como accesorio Como ArmarlaAcople la manguera Guarde el cordón eléctricoLimpie la alfombra con la aspiradora Después de la limpiezaLlene el tanque de solución de agua limpia Tanque de recuperación Corte automáticoComo usar la lavadora/extractora para Alfombras Limpieza de alfombrasOperación de la lavadora/extractora para alfombras Cómo transportar la lavadora/extractora para alfombrasRevise el material del relleno si es posible Categorías de telasPase la aspiradora a los tapizados y escalones Pruebe limpiar un lugar que no se veTanque de Botón Solución de Selector Agua limpia Gatillo para Liberar la solución Mantenimiento del tanque de solución de agua limpia Mantenimiento del tanque de recuperaciónComo Hacerle Mantenimiento Ensamblaje del pistónCorrea del cepillo circular para modelos IlustracionResolviendo Problemas Ayuda al cliente Garantía Limitada de Dos Años