Kenmore 625.34867 3D.HELPFUL Hints Checklist To Help YOU Save Money, Problem Cause Correction

Page 19

SECTION 3

CAREOFYOURSOFTENER

3D.HELPFUL HINTS CHECKLIST

... TO HELP YOU SAVE MONEY

If your water softener fails to work, make the following easy checks. Often, you will find what's wrong yourself and you won't have to call and wait for service. If you do not find anything wrong, while making the checks, and

your softener still does not work, call your Sears Service Department.

NOTES:

1.Also read ERROR CODE, page 12.

2.If an error code is not displayed, press and bold the #1 SELECT button until the display changes. Then, press the #1 SELECT button again and bold until a flashing HF code appears. It must show I-IF32. If any other number shows,

the face plate computer is working on incorrect input and would probably be the cause of the problem. To set

ITF32, press either the UP I_ or DOWN _ button. When HF32 shows, press #1 SELECT button to return a

flashing 12:00 AM display. Reset the present time, hardness number, etc., pages 6 and 7.

PROBLEM

CAUSE

 

CORRECTION

No soft water

No salt (or salt bridged) in the storage tank

Refill with salt, or break the salt bridge (page

 

 

16).

Press ON/OFF-HOLD (RECHARGE

 

 

NOW) button and hold for 3 seconds to start a

 

 

regeneration (see page 10).

 

Transfomer unplugged at the wall outlet,

Check for loss of power due to any of these

 

or power cable leads loose, fuse blown,

and correct. With the power back on, look at

 

circuit breaker popped, or circuit switched

the time display and read PROGRAM

 

off.

MEMORY, page 12.

 

Manual bypass valve(s) in bypass position

Look at FIG. t2 on page 20. Move the stem in

 

 

a single valve to service. In a 3-valve bypass,

 

 

open the inlet and outlet valves, and be sure to

 

 

fully close the bypass valve.

 

Dirty, plugged or damaged nozzle &

Take apart and clean or replace damaged

 

venturi

parts (see page 17).

 

Valve drain hose plugged

The

drain hose must not have kinks, sharp

 

 

bends, or be raised too high above the

 

 

softener (see page 16 in your installation

 

 

manual.

Water hard sometimes

Hardness number setting too low

Press and release the #1 SELECT button untU

 

 

HARDNESS shows in the display. Read the

 

 

hardness number in the display and be sure

 

 

the same grains per gallon number is shown

 

 

on your water analysis report. See page 7 to

 

 

reset. Press and release the SELECT button

 

 

until the present time shows in the display.

 

Using hot water when softener is Avoid usinghotwaterduringthistimebecause

 

regenerating

the water heater refills with hard water (see

 

 

Automatic Bypass, page 15).

 

Increase in the grains of hardness in your Ask your Sears retail or catalog store for a new

 

water supply

water analysis. Then make a new hardness

 

 

number setting (page 7).

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents Save this Manual Model noFull TEN Year Warranty Against Leaks WarrantyFull Three Year Electronics Warranty Care of Your Softener Repair PartsSection Safety GuidesSection Check List of ALL STEP-BY-STEP Guides to InstallSET Water Hardness Number Program the TimerWater Softener START-UP SET Present Time of DAYSET Clean Feature Option Water Softener START-UP 1C.PROGRAM the TimerSET Recharge Regeneration Time ADD Water Sanitizing the Water SoftenerADD Salt Fill the Storage Tank with SaltWater Softening Salt with Iron Remov Salt Monitor System 2A.FACEPLATE Timer FeaturesHOW Your Water Softener Works Extra RechargeOw YOURWATERSOFTE.ERWORKS Optional Adjustable SettingsHOW Your Water Softener Works Faceplate Timer Features Fill Backwash Brining Fast Rinse Brine Rinse 2B. Soft Water Service and RegenerationWater Flow Through Softener in Service Water Flow Through Softener in FillWater Flow Through Softener in Brining Brine Rinse 2B. Soft Water Service and RegenerationWater Flow Through Softener in Fast Rinse Electronics Automatic BypassSalt Bridge Careof YoursoftenerIron from the Resin BED Keeping the Water Softener CleanFrom Freezing 3C. Keep the SoftenerCare of Your Softener Problem Cause Correction 3D.HELPFUL Hints Checklist To Help YOU Save MoneyTimer HF Code 4A.DIMENSIONS/SPECIFICATIONSFaceplate 5A.TROUBLESHOOTINGService Tech Information Wiring SchematicPossible Defect Code Service TECH. Information 5A.TROUBLESHOOTINGAutomatic Electronic Diagnostics Manual Initiated Electronics DIAG- NosticsIndicator Valve Position TroubleshootingManual Advance Regeneration Check Servicing the Valve 5B.ROTARY Valve ServiceDisassembly AssemblyFill Cycle Service TECH. InformationService Cycle 5C .. Water Flow Through the Softener ValveBrining and Brine Rinse Cycles 5C. Water Flow Through the Softener Valve5C. Water Flow Through the Softener Valve \ \Section KEY Part Description Number Kenmore Water SOFTENER, Model noInlet Outlet Grounding Clamps Brineassemblyvalve=P,,,IRPARTS KEY Part NO. Number Parts ListPage Page Sears

625.34867 specifications

The Kenmore 625.34867 is a compact, high-efficiency dehumidifier designed to improve indoor air quality in homes and small spaces. This versatile appliance proves to be a valuable addition for those struggling with excess moisture, mold, and mildew, particularly in areas such as basements, bathrooms, and laundry rooms.

One of the standout features of the Kenmore 625.34867 is its robust moisture removal capacity, which is capable of extracting up to 50 pints of water from the air each day. This makes it an ideal choice for medium to large-sized rooms, ensuring a comfortable atmosphere while effectively preventing the detrimental effects of humidity.

Equipped with a user-friendly digital control panel, the Kenmore 625.34867 allows for effortless operation and monitoring. Users can easily adjust the desired humidity level, which can be set between 35% and 85%, to suit their preferences. Additionally, the dehumidifier features a 24-hour timer and multiple fan speeds, offering flexibility in its operation to match varying conditions throughout the day.

One noteworthy technology integrated into this model is the built-in humidistat. This smart feature continuously monitors the room's humidity levels, automatically turning the unit on or off to maintain the set humidity, thereby conserving energy and ensuring optimal performance.

The Kenmore 625.34867 is also designed with optimal drainage solutions in mind. It includes a removable water tank with a large capacity, which makes emptying infrequent and straightforward. For added convenience, users can opt for continuous drainage via a standard garden hose, eliminating the need to manually empty the tank.

In terms of portability, this dehumidifier is equipped with durable caster wheels that allow for easy movement from room to room. The ergonomic top handle contributes to its ease of transport, making it simple to adapt it to different spaces as needed.

Finally, the Kenmore 625.34867 is designed with safety in mind. It features an automatic shut-off function that activates when the water tank is full, preventing overflow and potential water damage. Combined with its energy-efficient operation, this dehumidifier stands as a practical solution for maintaining a healthy indoor environment, free from excessive moisture and its associated issues.
Top Page Image Contents