Caster/Caster Foot Assembly
1. Remove the power assembly from the dust drum and set aside.
2. Turn the dust drum upside down on the floor.
3. Insert the caster feet into the bottom of drum, as shown (4 places).
4. Push on the caster foot until the foot is flush with bottom of the dust drum.
5. Insert the caster stem into the socket of the caster foot, as shown (4 places).
Caster Stem
6. Push on the caster until the ball on the
caster stem is inserted all the way into
_i
all
the socket. You will hear the ball snap into the socket and the caster will swiv-
el easily when positioning is correct.
7. Turn the drum upright.
aster ot