Mitsubishi Electronics MSH24WN FEEL... Auto Operation, Description of I FEEL... mode

Page 7

I FEEL... AUTO OPERATION

•To start operation:

With the “ (I FEEL...)” auto operation mode,

 

ON/OFF

Press the

button.

Description of “I FEEL...” mode

the optimum room condition can be set automati-

■

cally with a one-touch operation.

When the “ (I FEEL...)” mode is selected, the air conditioner is automatically controlled at the optimum temperature.

Details of operation

According to the room temperature when the operation starts, the opera- tion mode is automatically set to COOL, DRY or HEAT. However, when operation is started again within 2 hours after it is stopped, the same operation mode before the operation is stopped is selected. The opera- tion mode selected first is not changed even if the room temperature changes. If the operation mode does not match the room condition, se-

Room temperature: About 77 °F or higher

→COOL

˚C

CLOCK AMPM

AMPM

•To stop operation:

■ Press the

ON/OFF

button.

•If you feel slightly warm:

TOO

■

 

WARM

Press the

button to lower the tempera-

lect the appropriate operation mode by pressing the MODE button.

Details of auto operation

Room temperature

Operation mode

Target temperature

when started

 

(initial state)

About 77

°F or higher

COOL

About 75 °F

About 77

°F - 73 °F

DRY

—

About 73

°F or lower

HEAT

About 79 °F

NOTE

About 77 °F - 73 °F→ DRY About 73 °F or lower

→HEAT

ON/OFF TOO TOO

WARM COOL

FAN

STOP

I FEEL COOL

 

VANE

START

HEAT DRY

 

MODE WIDE VANE

HR.

LONG

MIN.

RESET CLOCK

 

ture.

One press lowers the temperature by about 2 °F.

•If you feel slightly cool:

TOO

■Pressture. the COOL button to raise the tempera-

One press raises the temperature by about 2 °F.

When “ (I FEEL...)” is not selected, press the MODE button until it is set.

Each time the button is pressed, the operation mode is changed in sequence: (I FEEL...) → (COOL) → (DRY)

→(HEAT)

FAN STOP

I FEEL COOL

VANE START

HEAT DRY

MODE WIDE VANE HR.

COOL: When the room temperature is 4 °F higher than the set temperature, the set temperature may not be changed since the air conditioner is operating to reach the target (set) temperature. In this case, please wait until the room temperature drops to within 4 °F of the set temperature and then change the set temperature.

HEAT: When the room temperature is 4 °F lower than the set temperature, the set temperature may not be changed since the air conditioner is operating to reach the target (set) temperature. In this case, please wait until the room temperature rises to within 4 °F of the set temperature and then change the set temperature.

Details of display on the indoor unit

The operation indicator at the right side of the indoor unit indicates the operation state.

 

 

Lighted

 

 

Operation Indicator

Not lighted

 

Operation indicator lamp

 

 

 

 

 

 

Indication

Operation state

Difference between target

 

temperature and room temperature

 

 

 

 

 

 

 

 

 

This shows that the air conditioner is operating to reach the

 

 

 

target temperature. Please wait until the target temperature

About 4 °F or more

 

 

is obtained.

 

 

 

 

 

 

 

This shows that the room temperature is approaching the

About 4 °F or less

 

 

target temperature.

 

 

 

ECONO COOL LONG MIN

Description of “AUTO RESTART FUNCTION”

■This unit is equipped with an auto restart function. When the main power is turned on, the air conditioner will start operation automatically in the same mode as the one set with the remote controller before the shutoff of the main power.

■If the unit was set to off with the remote controller before the shutoff of the main power, it will remain stopped even after the main power is turned on.

■If the unit was in the emergency operation before the shutoff of the main power, it will start operation, when main power comes on, in the same mode as the one set with the remote controller before the emergency operation.

■If the unit is operated in “I FEEL ...” mode before power failure, the operation is not stored in the memory. In “I FEEL ...” mode, the operation is decided by the initial room temperature at (re)start.

■Since the air conditioner has been shipped from the factory with the COOL mode saved in the memory for auto restart function, it starts cooling operation when the user turns on the main power for the first time after installation.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents English Español Operating Instructions Manual DE InstruccionesRepairs or relocation should not be done by the customer Safety PrecautionsCustomer should not install this unit Do not turn the breaker off/on during operationDo not use an insecticide or flammable spray Do not operate switches with wet handsDo not clean the air con- ditioner with water Ventilate well in using the unit with a stove, etcOutdoor unit Safety Precautions Name of Each PartDo not install the unit where flammable gas could leak Indoor unitOpen the front lid Remote controllerAuto restart function Preparation Before OperationBreaker for the air conditioner FEEL... Auto Operation Description of I FEEL... modeManual Operation COOL, DRY, Heat To select the COOL, DRY or Heat modeRecommended Horizontal Vane range AIR Flow Velocity and Direction AdjustmentAuto air flow direction control operation To change the AIR Flow velocity, press the FAN buttonLong Operation Timer Operation ON/OFF Timer Before starting maintenance MaintenanceWhen it is not going to be used for a long time When the air conditioner is to be used againAir cleaning filter replacement about once every 4 months Cleaning the air filter about once every 2 weeksCleaning the deodorizing filter about once every 2 weeks Deodorizing filter replacement about once a yearAnswer not a malfunction When a power failure occursCheck the following QuestionQuestion Answer not a malfunction When YOU Think That Trouble has OccurredINSTALLATION, Relocation and Inspection Podría ser nocivo para su salud Medidas DE SeguridadEl cliente no debe reparar ni cambiar de sitio la unidad El cliente no debe instalar la unidadNo instale la unidad en un soporte roto No manipule los interrup- tores con las manos mo- jadasNo limpie el equipo de aire acondicionado con agua No utilice la unidad para fines que no sean los in- dicadosHaga una toma de tierra Medidas DE Seguridad Nombre DE LAS PartesUnidad interior Unidad exteriorAbra la tapa frontal Controlador remotoControlador remoto cómo colocar las pilas y ponerlo en hora Preparación Antes DE Ponerlo EN FuncionamientoFunción de reinicio automático Interruptor principal del acondicionador de aireDescripción del modo de accionamiento automático I Feel Accionamiento Automático I FeelNivel de humedad idóneo para las personas Para desactivarlos Pulse el botónPara cambiar la temperatura Para una refrigeración eficaz→ → → → Ángulo DE Giro → → Ajuste DE LA Velocidad Y DE LA Dirección DEL Flujo DE AireCómo ajustar automáticamente la dirección del flujo de aire Ángulo máximo del flujo de aire horizontalDurante el funciona Cómo configurar el temporizador de conexión Pulse el botónRealice los siguientes pasos mientras esté Pulse el botón LongOiga un clic Después cierre el panel frontal MantenimientoDesactive el interruptor Quite las pilas del controlador remotoColoque el filtro de aire Cómo sustituir el filtro desodorizante una vez al añoRetire el filtro de aire Retire el filtro de limpieza del aire Tipo fuelle blancoPregunta Compruebe lo siguienteConexion? ¿Es correcta la polari- dad +, de las pilas?SI Cree QUE SE HA Producido UN Problema INSTALACIÓN, Cambio DE Sitio Y Inspección Page Page SG79Y092H01

MSH24WN specifications

Mitsubishi Electronics MSH24WN is a high-performance air conditioning unit that exemplifies the brand's commitment to innovation, efficiency, and user comfort. This model has gained popularity in residential and commercial settings for its advanced features and reliable operation.

One of the standout features of the MSH24WN is its impressive seasonal energy efficiency ratio (SEER). With a SEER rating that often exceeds the industry average, this unit helps reduce energy consumption, lowering utility bills while minimizing environmental impact. The inverter technology employed in this air conditioner further enhances energy efficiency by adjusting the compressor speed based on real-time cooling demand. This means the unit operates quietly and maintains a consistent temperature without the energy waste associated with traditional on-and-off systems.

Additionally, the MSH24WN comes equipped with a high-performance filtration system. This system effectively captures dust, allergens, and pollutants, ensuring that the air circulated in your space is clean and healthy. The unit also features a self-cleaning function that helps to maintain the evaporator coils, preventing mold growth and ensuring optimal airflow.

User convenience is another highlight of the MSH24WN. It supports Wi-Fi connectivity, allowing homeowners to control the air conditioning system remotely via a smartphone app. This feature facilitates real-time adjustments, ensuring that spaces are pre-cooled or heated according to individual preferences before arriving home.

Furthermore, the MSH24WN operates quietly, making it suitable for bedrooms, offices, and other noise-sensitive environments. The indoor unit is designed with a sleek and modern aesthetic, blending seamlessly with various interior styles.

Another notable characteristic of this model is its robust build quality, ensuring durability and longevity. Mitsubishi Electronics is renowned for its commitment to reliability, and the MSH24WN is no exception. The unit is designed to withstand varying weather conditions, making it an excellent choice for diverse climates.

In summary, Mitsubishi Electronics MSH24WN is a top-tier air conditioning solution that combines energy efficiency, advanced filtration, user-friendly controls, and robust performance. Whether for residential or commercial use, this model stands out for its engineering excellence and focus on environmental sustainability, delivering exceptional comfort to users year-round.
Top Page Image Contents