Remote controller
Once the controls are set, the same operation mode can be repeated by simply pressing the ON / OFF button.
Remote controller operation buttons
TIMER ON/OFF button
This switches between continuous operation and the timer operation.
CLOCK/TIMER button
This sets or switches the current time,start time and stop time.
OPERATION MODE button
FAN SPEED button
This sets the ventilation fan speed.
Press this button to switch the cool- ing, electronic dry (Dehumidify), automatic and heating modes.
SET TEMPERATURE button
DRY COOL |
|
| F |
TIMER OFF TIMER | CLOCK AUTO AUTO |
| |
AUTO | CHECK SET TEMP. | START STOP FAN |
|
HEAT |
| SPEED | AUTO |
|
| ||
|
|
| RETURN |
MODE | TIMER ON/OFF CLOCK/TIMER FAN SPEED AIR DISCHARGE FILTER | ||
ON/OFF button
This switches between the opera- tion and stop modes each time it is press. The lamp on this button lights during operation.
AIR DISCHARGE button
This adjusts the vertical angle of the ventilation.
This sets the room temperature. The temperature setting can be per- formed in 2˚F units.
Setting range : Cooling Heating
AIR SWEEP CHECK
SET TEMP. TIMER SET | TEST RUN | FILTER button |
REMOTE CONTROLLER
This resets the filter service indica- tion display.
AIR SWEEP button |
|
| |
This switches the horizontal fan |
|
| |
Only press this button to perform an | |||
motion (Swing louver) ON and OFF. |
| ||
| inspection check or test operation. | ||
|
| ||
|
| Do not use it for normal operation. | |
|
| ||
|
|
|