Electrolux 60830 Adding special salt, Vated, Place the funnel supplied on the container opening

Page 14
SALE SALT SALZ SEL

Operating Instructions

3

If the water softener is electronically set at “1” for the purpose of using

 

detergent that includes special salt, the special salt indicator is deacti-

vated.

Adding special salt

If you are using dishwasher detergent and special salt separately, add the special salt:

–Before using the dishwasher for the first time.

–When the indicator for special salt SALT is illuminated on the control panel.

0 1. Open the door, remove the lower basket.

2. Undo the lid on the salt container by turning it anticlockwise.

3.When using for the first time: fill the salt container with water.

4.Place the funnel supplied on the container opening.

Fill the container with salt through the funnel; the capacity of the con- tainer is approx. 1.0-1.5 kg depend- ing on the grain size. Do not overfill the salt container with salt.

3

The water expelled by filling the salt container with special salt runs

 

out of the salt container onto the base of the washing compartment.

This is not a cause for concern, the water will be pumped out at the start of the next wash programme.

5.Clean any salt remnants on the container opening.

6.Turn the lid clockwise to the stop, otherwise dishwasher salt will leak into the wash water, this could lead to poor wash results. To avoid this run a rinse programme after filling the salt container with special salt. This will wash away salt water and any salt crystals that have been spilt.

3

Depending on the size of the salt grains, it can take several hours for

 

the salt to dissolve in the water and for the SALT indicator to extin-

guish.

The setting of the water softener and thus the consumption of salt are dependent on the hardness of the local water.

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents Favorit Please read these user instructions carefully Tips on using the applianceDear customer Pass them on to any subsequent owner of the applianceContents Installation and Connection Instructions Child Safety Safety InstructionsInstallation, Connection and Placing into Operation General SafetyCorrect Use Disposing of the Packaging Material DisposalEconomical and Ecological Dishwashing Disposal of Old AppliancesAppliance Features and Control Panel Control Panel Multi-Display can displayPrior to using for the first time Control Indicators have the following significancePanel Setting the water softenerNess and hardness range of the water in your area Manual setting Electronic settingWater can be softened in one of two ways Special salt for the water softenerUse special salt or salt substitute Place the funnel supplied on the container opening Adding special saltVated Rinse Aid Be cancelled see 3 in 1 functionBeen started. The programme must be cancelled Reset Activating/deactivating the rinse aid dispenserFully open the rinse aid compartment lid Multi-display will indicate the current settingAdding rinse aid Adjusting Rinse Aid Dosing Not be washed in the dishwasher Daily UseLoading Cutlery and Dishes Tioned horizontally in the upper basket Loading CutleryDo not lay small objects e.g. lids in the cutlery rack Place knives, small spoons and smallBasket To ease the loading of large items Loading Pans, Frying Pans Large PlatesFolded over to the left Two right-hand plate insertsTwo rear plate inserts in the lower Folded across one anotherAcross one another Baskets can be folded across one anotherLoading Cups, Glasses Coffee Services Raising the Upper Basket Adjusting the Height of the Upper BasketLowering the Upper Basket Filling with Detergent Fill with detergentUse of 3 in 1/ Combi Detergent Tablets General AdviceSpecial Advice Automatic Wash Programmes Concentrated DetergentDetergent tablets Selecting the Wash Programme Programme Table Addition Type of SoilingGlass Changing a programme Changing/interrupting/cancelling a programmeStarting a programme Interrupting the programme by opening the dishwasher door Cancelling the programme Reset1 function Changing the start delay Setting or changing the start delaySetting the start delay Cancelling the start delayEmptying the Dishwasher Switching Off the DishwasherLoad Sensing Sensor Logic Immediately after the end of the programmeCare and Cleaning Cleaning the FilterStances Error messages are displayed What to do, ifAfter remedying the Filter error, shut the door Error codeDishes are still dirty There are problems with the operation of the dish- washerWash results are not satisfactory Dishes are wet and dullThere are dried water drops on the glasses and dishes Technical DataLower rinse aid dosing Lower basket with cutlery basket Sample loading arrangementsUpper basket without cutlery tray Built-Under Dishwasher Installing the DishwasherSee enclosed installation instructions Free-Standing AppliancesPlinth on free-standing appliances is not adjustable Work surface must be re-mountedPermitted water pressure Connecting the DishwasherWater Connection Connect the inlet hoseWater inlet hose with safety valve Please take care when installing the water inlet hoseWater drain Leak Prevention System Appliance is automatically pumped outElectrical Connection Changing a fuseConnections Guarantee Conditions Page Calls may be recorded for training purposes 08705 929Customer Care AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG

60830 specifications

The Electrolux 60830 is a state-of-the-art vacuum cleaner that combines powerful performance with advanced technology to ensure a thorough cleaning experience. Designed for both convenience and efficiency, it caters to a wide range of cleaning needs in modern households.

One of the standout features of the Electrolux 60830 is its impressive suction power, which is driven by a robust motor that provides optimal cleaning performance on various surfaces. The adjustable suction settings allow users to select the appropriate level of power, making it suitable for cleaning delicate fabrics as well as high-traffic carpets. This versatility makes it an ideal choice for families with diverse cleaning requirements.

Another key characteristic of the Electrolux 60830 is its innovative multi-cyclonic technology. This system enhances dust and debris separation from the air, ensuring that the vacuum maintains consistent suction power over time. This means that users don’t have to worry about decreased performance due to clogging or filters needing constant replacement, which ultimately leads to a longer lifespan for the product.

The vacuum cleaner also features a dust container designed for easy emptying, allowing users to dispose of dirt and debris without the hassle of dealing with messy bags. The large capacity of the container minimizes the frequency of emptying, making it perfect for larger cleaning tasks.

For those with allergies, the Electrolux 60830 is equipped with a highly efficient filtration system, which captures fine particles and allergens, helping to purify the air as you clean. This is particularly beneficial for households with pets or allergy sufferers, ensuring a healthier living environment.

The design of the Electrolux 60830 emphasizes user comfort and maneuverability. Its lightweight construction and ergonomic handle make it easy to carry and operate, while the flexible hose and various attachments allow users to reach tight corners and high surfaces with ease. Additionally, the vacuum cleaner is designed with a quiet operation mode to minimize noise, making it suitable for use at any time of day without disturbing the household.

In summary, the Electrolux 60830 combines powerful suction, multi-cyclonic technology, and user-friendly design to make it a top choice for anyone seeking an efficient and effective cleaning solution. Whether tackling everyday dust or deep cleaning tasks, this vacuum cleaner is equipped to handle it all while ensuring comfort and convenience for the user.
Top Page Image Contents