Electrolux 60830 manual Rinse Aid, Activating/deactivating the rinse aid dispenser

Page 15

Operating Instructions

Rinse Aid

Rinse aid ensures thorough rinsing, spot and streak free drying of dishes and glassware.

Rinse aid can be added in one of two ways:

•If you are using dishwasher detergent that already contains rinse aid, the detergent including the rinse aid is put into the detergent compartment.

–In this case the dispensing of rinse aid from the dispenser must be deactivated to avoid a double dosage.

•If you are using dishwasher detergent and rinse aid separately, the rinse aid is to be put into the rinse aid dispenser.

–In this case the dispensing of rinse aid from the dispenser must be activated.

–The amount of rinse aid to be dispensed must be set.

1Only use rinse aid specifically designed for domestic dishwashers. Never fill the rinse aid dispenser with any another substance (e.g. concen- trated vinegar) or dishwasher cleaning agent. This would damage the appliance.

 

Activating/deactivating the rinse aid dispenser

3

Some appliances are equipped with an additional 3 in 1 function.

 

If you use 3-in-1 dishwashing tablets and select the 3 in 1 function

 

together with the programme, the inflow of rinse aid does not have to

 

be cancelled (see ”3 in 1 function”).

0 1. Press the ON/OFF button.

 

The LED in the ON/OFF button will become illuminated.

3

If other indicators are also illuminated, this means that a programme has

 

been started. The programme must be cancelled (RESET):

Press function buttons 1 and 2 simultaneously for approx. 2 seconds. All other indicators will go out.

2.Press the function buttons 1 and 2 simultaneously and keep them pressed until the LED indicators for function buttons 1 and 3 flash.

3.Press function button 2 again.

The LED indicator for function button 2 will flash.

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Favorit Pass them on to any subsequent owner of the appliance Tips on using the applianceDear customer Please read these user instructions carefullyContents Installation and Connection Instructions General Safety Safety InstructionsInstallation, Connection and Placing into Operation Child SafetyCorrect Use Disposal of Old Appliances DisposalEconomical and Ecological Dishwashing Disposing of the Packaging MaterialAppliance Features and Control Panel Multi-Display can display Control PanelControl Indicators have the following significance Prior to using for the first timeSetting the water softener Ness and hardness range of the water in your areaPanel Electronic setting Manual settingSpecial salt for the water softener Use special salt or salt substituteWater can be softened in one of two ways Adding special salt VatedPlace the funnel supplied on the container opening Activating/deactivating the rinse aid dispenser Be cancelled see 3 in 1 functionBeen started. The programme must be cancelled Reset Rinse AidMulti-display will indicate the current setting Adding rinse aidFully open the rinse aid compartment lid Adjusting Rinse Aid Dosing Daily Use Loading Cutlery and DishesNot be washed in the dishwasher Place knives, small spoons and small Loading CutleryDo not lay small objects e.g. lids in the cutlery rack Tioned horizontally in the upper basketBasket Two right-hand plate inserts Loading Pans, Frying Pans Large PlatesFolded over to the left To ease the loading of large itemsBaskets can be folded across one another Folded across one anotherAcross one another Two rear plate inserts in the lowerLoading Cups, Glasses Coffee Services Adjusting the Height of the Upper Basket Lowering the Upper BasketRaising the Upper Basket Fill with detergent Filling with DetergentGeneral Advice Special AdviceUse of 3 in 1/ Combi Detergent Tablets Concentrated Detergent Detergent tabletsAutomatic Wash Programmes Addition Type of Soiling Selecting the Wash Programme Programme TableGlass Changing/interrupting/cancelling a programme Starting a programmeChanging a programme Cancelling the programme Reset 1 functionInterrupting the programme by opening the dishwasher door Cancelling the start delay Setting or changing the start delaySetting the start delay Changing the start delayImmediately after the end of the programme Switching Off the DishwasherLoad Sensing Sensor Logic Emptying the DishwasherCleaning the Filter Care and CleaningStances What to do, if Error messages are displayedError code After remedying the Filter error, shut the doorDishes are wet and dull There are problems with the operation of the dish- washerWash results are not satisfactory Dishes are still dirtyTechnical Data Lower rinse aid dosingThere are dried water drops on the glasses and dishes Sample loading arrangements Upper basket without cutlery trayLower basket with cutlery basket Free-Standing Appliances Installing the DishwasherSee enclosed installation instructions Built-Under DishwasherWork surface must be re-mounted Plinth on free-standing appliances is not adjustableConnect the inlet hose Connecting the DishwasherWater Connection Permitted water pressurePlease take care when installing the water inlet hose Water inlet hose with safety valveWater drain Appliance is automatically pumped out Leak Prevention SystemChanging a fuse Electrical ConnectionConnections Guarantee Conditions Page 08705 929 Customer CareCalls may be recorded for training purposes AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG

60830 specifications

The Electrolux 60830 is a state-of-the-art vacuum cleaner that combines powerful performance with advanced technology to ensure a thorough cleaning experience. Designed for both convenience and efficiency, it caters to a wide range of cleaning needs in modern households.

One of the standout features of the Electrolux 60830 is its impressive suction power, which is driven by a robust motor that provides optimal cleaning performance on various surfaces. The adjustable suction settings allow users to select the appropriate level of power, making it suitable for cleaning delicate fabrics as well as high-traffic carpets. This versatility makes it an ideal choice for families with diverse cleaning requirements.

Another key characteristic of the Electrolux 60830 is its innovative multi-cyclonic technology. This system enhances dust and debris separation from the air, ensuring that the vacuum maintains consistent suction power over time. This means that users don’t have to worry about decreased performance due to clogging or filters needing constant replacement, which ultimately leads to a longer lifespan for the product.

The vacuum cleaner also features a dust container designed for easy emptying, allowing users to dispose of dirt and debris without the hassle of dealing with messy bags. The large capacity of the container minimizes the frequency of emptying, making it perfect for larger cleaning tasks.

For those with allergies, the Electrolux 60830 is equipped with a highly efficient filtration system, which captures fine particles and allergens, helping to purify the air as you clean. This is particularly beneficial for households with pets or allergy sufferers, ensuring a healthier living environment.

The design of the Electrolux 60830 emphasizes user comfort and maneuverability. Its lightweight construction and ergonomic handle make it easy to carry and operate, while the flexible hose and various attachments allow users to reach tight corners and high surfaces with ease. Additionally, the vacuum cleaner is designed with a quiet operation mode to minimize noise, making it suitable for use at any time of day without disturbing the household.

In summary, the Electrolux 60830 combines powerful suction, multi-cyclonic technology, and user-friendly design to make it a top choice for anyone seeking an efficient and effective cleaning solution. Whether tackling everyday dust or deep cleaning tasks, this vacuum cleaner is equipped to handle it all while ensuring comfort and convenience for the user.
Top Page Image Contents