Electrolux 60830 manual What to do, if, Error messages are displayed

Page 36

Operating Instructions

What to do, if ...

Try to rectify minor faults on the dishwasher with the aid of the instructions given here. If you call an engineer to resolve a of fault listed here, or to repair a fault caused by incorrect use or installation, a charge will be made even if the appliance is in guarantee.

...Error messages are displayed.

If any of the indicators in the control panel, as listed in the table below, are flashing or are illuminated, you can probably rectify the fault your- self.

Malfunction

Possible cause

Remedy

 

The tap is blocked or furred

Clean the tap.

 

with lime-scale.

 

 

 

The tap is turned off.

Turn the tap on.

 

 

 

 

The filter (where present) in

 

 

the threaded hose fitting at

Clean the filter in the

The programme indicator for

the water inlet valve is

threaded hose fitting.

the selected programme is

blocked.

 

flashing. The WATER indica-

 

Press the button for the

tor is continuously illumi-

 

 

selected programme,

nated, error code Å 10 is

 

 

then cancel the pro-

displayed in the multi-dis-

 

Filters in the base of the

gramme by pressing

play: there is no water run-

washing compartment are

RESET (see chapter:

ning into the dishwasher.

blocked.

“Starting a pro-

 

 

 

gramme”); clean out the

 

 

filters (see chapter:

 

 

“Cleaning the filters”).

 

The water inlet hose has not

Check hose installation.

 

been correctly laid.

 

The programme indicator for

The siphon is blocked.

Clean out siphon.

the selected programme is

 

 

The water drain hose has

 

flashing, error code Å 20 is

Check hose installation.

not been correctly laid.

displayed in the multi-display.

 

Error code Å 30 is displayed

The leak prevention system

Turn off the tap and

contact customer serv-

in the multi-display.

has been triggered.

ice.

 

 

 

 

 

36

Page 35 Page 37
Image 36
Page 35 Page 37
Contents Favorit Tips on using the appliance Dear customerPlease read these user instructions carefully Pass them on to any subsequent owner of the applianceContents Installation and Connection Instructions Safety Instructions Installation, Connection and Placing into OperationChild Safety General SafetyCorrect Use Disposal Economical and Ecological DishwashingDisposing of the Packaging Material Disposal of Old AppliancesAppliance Features and Control Panel Control Panel Multi-Display can displayPrior to using for the first time Control Indicators have the following significanceSetting the water softener Ness and hardness range of the water in your areaPanel Manual setting Electronic settingSpecial salt for the water softener Use special salt or salt substituteWater can be softened in one of two ways Adding special salt VatedPlace the funnel supplied on the container opening Be cancelled see 3 in 1 function Been started. The programme must be cancelled ResetRinse Aid Activating/deactivating the rinse aid dispenserMulti-display will indicate the current setting Adding rinse aidFully open the rinse aid compartment lid Adjusting Rinse Aid Dosing Daily Use Loading Cutlery and DishesNot be washed in the dishwasher Loading Cutlery Do not lay small objects e.g. lids in the cutlery rackTioned horizontally in the upper basket Place knives, small spoons and smallBasket Loading Pans, Frying Pans Large Plates Folded over to the leftTo ease the loading of large items Two right-hand plate insertsFolded across one another Across one anotherTwo rear plate inserts in the lower Baskets can be folded across one anotherLoading Cups, Glasses Coffee Services Adjusting the Height of the Upper Basket Lowering the Upper BasketRaising the Upper Basket Filling with Detergent Fill with detergentGeneral Advice Special AdviceUse of 3 in 1/ Combi Detergent Tablets Concentrated Detergent Detergent tabletsAutomatic Wash Programmes Selecting the Wash Programme Programme Table Addition Type of SoilingGlass Changing/interrupting/cancelling a programme Starting a programmeChanging a programme Cancelling the programme Reset 1 functionInterrupting the programme by opening the dishwasher door Setting or changing the start delay Setting the start delayChanging the start delay Cancelling the start delaySwitching Off the Dishwasher Load Sensing Sensor LogicEmptying the Dishwasher Immediately after the end of the programmeCare and Cleaning Cleaning the FilterStances Error messages are displayed What to do, ifAfter remedying the Filter error, shut the door Error codeThere are problems with the operation of the dish- washer Wash results are not satisfactoryDishes are still dirty Dishes are wet and dullTechnical Data Lower rinse aid dosingThere are dried water drops on the glasses and dishes Sample loading arrangements Upper basket without cutlery trayLower basket with cutlery basket Installing the Dishwasher See enclosed installation instructionsBuilt-Under Dishwasher Free-Standing AppliancesPlinth on free-standing appliances is not adjustable Work surface must be re-mountedConnecting the Dishwasher Water ConnectionPermitted water pressure Connect the inlet hoseWater inlet hose with safety valve Please take care when installing the water inlet hoseWater drain Leak Prevention System Appliance is automatically pumped outElectrical Connection Changing a fuseConnections Guarantee Conditions Page 08705 929 Customer CareCalls may be recorded for training purposes AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG

60830 specifications

The Electrolux 60830 is a state-of-the-art vacuum cleaner that combines powerful performance with advanced technology to ensure a thorough cleaning experience. Designed for both convenience and efficiency, it caters to a wide range of cleaning needs in modern households.

One of the standout features of the Electrolux 60830 is its impressive suction power, which is driven by a robust motor that provides optimal cleaning performance on various surfaces. The adjustable suction settings allow users to select the appropriate level of power, making it suitable for cleaning delicate fabrics as well as high-traffic carpets. This versatility makes it an ideal choice for families with diverse cleaning requirements.

Another key characteristic of the Electrolux 60830 is its innovative multi-cyclonic technology. This system enhances dust and debris separation from the air, ensuring that the vacuum maintains consistent suction power over time. This means that users don’t have to worry about decreased performance due to clogging or filters needing constant replacement, which ultimately leads to a longer lifespan for the product.

The vacuum cleaner also features a dust container designed for easy emptying, allowing users to dispose of dirt and debris without the hassle of dealing with messy bags. The large capacity of the container minimizes the frequency of emptying, making it perfect for larger cleaning tasks.

For those with allergies, the Electrolux 60830 is equipped with a highly efficient filtration system, which captures fine particles and allergens, helping to purify the air as you clean. This is particularly beneficial for households with pets or allergy sufferers, ensuring a healthier living environment.

The design of the Electrolux 60830 emphasizes user comfort and maneuverability. Its lightweight construction and ergonomic handle make it easy to carry and operate, while the flexible hose and various attachments allow users to reach tight corners and high surfaces with ease. Additionally, the vacuum cleaner is designed with a quiet operation mode to minimize noise, making it suitable for use at any time of day without disturbing the household.

In summary, the Electrolux 60830 combines powerful suction, multi-cyclonic technology, and user-friendly design to make it a top choice for anyone seeking an efficient and effective cleaning solution. Whether tackling everyday dust or deep cleaning tasks, this vacuum cleaner is equipped to handle it all while ensuring comfort and convenience for the user.
Top Page Image Contents