Electrolux 60830 manual Starting a programme, Changing/interrupting/cancelling a programme

Page 30

Operating Instructions

Starting a programme

0 1. Check that the dishes and cutlery are stacked in the dishwasher in such a way that the spray arms are free to rotate.

2.Turn on the water tap fully.

3.Close the door.

4.Press the ON/OFF button.

The LED in the ON/OFF button will illuminate.

5.Press the relevant button for the programme required (see “Programme Chart”).

The programme display will become illuminated. The remaining time for the programme will be shown in the multi-display.

The selected programme will begin after approximately 3 seconds.

3

During the programme, the remaining time shown in the multi-display

 

may be adjusted according to amount of dishes, degree of soiling, etc.

3

If an error message is displayed in the multi-display after the pro-

 

gramme has started, please read the section “What to do if ...”.

 

Changing/interrupting/cancelling a programme

3

Only change or interrupt a programme that is in progress if it is abso-

 

lutely necessary. After the appliance has been closed again, the air that

 

has entered will be heated significantly and expand. As a result, water

 

may collect in the base of the appliance and trigger the anti-flood sys-

 

tem.

 

Changing a programme

3

If you would like to change the programme in the first 3 seconds after

 

having selected a programme, briefly press the button for the new pro-

gramme.

If you would like to change the programme after this time, proceed as follows:

0 1. Press the button for the new programme and hold it down.

The indicator for the programme that is currently running will flash. After several seconds only the indicator for the new programme will be flashing.

2.Release the programme button.

The newly selected programme will begin.

30

Page 29 Page 31
Image 30
Page 29 Page 31
Contents Favorit Please read these user instructions carefully Tips on using the applianceDear customer Pass them on to any subsequent owner of the applianceContents Installation and Connection Instructions Child Safety Safety InstructionsInstallation, Connection and Placing into Operation General SafetyCorrect Use Disposing of the Packaging Material DisposalEconomical and Ecological Dishwashing Disposal of Old AppliancesAppliance Features and Control Panel Control Panel Multi-Display can displayPrior to using for the first time Control Indicators have the following significanceSetting the water softener Ness and hardness range of the water in your areaPanel Manual setting Electronic settingSpecial salt for the water softener Use special salt or salt substituteWater can be softened in one of two ways Adding special salt VatedPlace the funnel supplied on the container opening Rinse Aid Be cancelled see 3 in 1 functionBeen started. The programme must be cancelled Reset Activating/deactivating the rinse aid dispenserMulti-display will indicate the current setting Adding rinse aidFully open the rinse aid compartment lid Adjusting Rinse Aid Dosing Daily Use Loading Cutlery and DishesNot be washed in the dishwasher Tioned horizontally in the upper basket Loading CutleryDo not lay small objects e.g. lids in the cutlery rack Place knives, small spoons and smallBasket To ease the loading of large items Loading Pans, Frying Pans Large PlatesFolded over to the left Two right-hand plate insertsTwo rear plate inserts in the lower Folded across one anotherAcross one another Baskets can be folded across one anotherLoading Cups, Glasses Coffee Services Adjusting the Height of the Upper Basket Lowering the Upper BasketRaising the Upper Basket Filling with Detergent Fill with detergentGeneral Advice Special AdviceUse of 3 in 1/ Combi Detergent Tablets Concentrated Detergent Detergent tabletsAutomatic Wash Programmes Selecting the Wash Programme Programme Table Addition Type of SoilingGlass Changing/interrupting/cancelling a programme Starting a programmeChanging a programme Cancelling the programme Reset 1 functionInterrupting the programme by opening the dishwasher door Changing the start delay Setting or changing the start delaySetting the start delay Cancelling the start delayEmptying the Dishwasher Switching Off the DishwasherLoad Sensing Sensor Logic Immediately after the end of the programmeCare and Cleaning Cleaning the FilterStances Error messages are displayed What to do, ifAfter remedying the Filter error, shut the door Error codeDishes are still dirty There are problems with the operation of the dish- washerWash results are not satisfactory Dishes are wet and dullTechnical Data Lower rinse aid dosingThere are dried water drops on the glasses and dishes Sample loading arrangements Upper basket without cutlery trayLower basket with cutlery basket Built-Under Dishwasher Installing the DishwasherSee enclosed installation instructions Free-Standing AppliancesPlinth on free-standing appliances is not adjustable Work surface must be re-mountedPermitted water pressure Connecting the DishwasherWater Connection Connect the inlet hoseWater inlet hose with safety valve Please take care when installing the water inlet hoseWater drain Leak Prevention System Appliance is automatically pumped outElectrical Connection Changing a fuseConnections Guarantee Conditions Page 08705 929 Customer CareCalls may be recorded for training purposes AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG

60830 specifications

The Electrolux 60830 is a state-of-the-art vacuum cleaner that combines powerful performance with advanced technology to ensure a thorough cleaning experience. Designed for both convenience and efficiency, it caters to a wide range of cleaning needs in modern households.

One of the standout features of the Electrolux 60830 is its impressive suction power, which is driven by a robust motor that provides optimal cleaning performance on various surfaces. The adjustable suction settings allow users to select the appropriate level of power, making it suitable for cleaning delicate fabrics as well as high-traffic carpets. This versatility makes it an ideal choice for families with diverse cleaning requirements.

Another key characteristic of the Electrolux 60830 is its innovative multi-cyclonic technology. This system enhances dust and debris separation from the air, ensuring that the vacuum maintains consistent suction power over time. This means that users don’t have to worry about decreased performance due to clogging or filters needing constant replacement, which ultimately leads to a longer lifespan for the product.

The vacuum cleaner also features a dust container designed for easy emptying, allowing users to dispose of dirt and debris without the hassle of dealing with messy bags. The large capacity of the container minimizes the frequency of emptying, making it perfect for larger cleaning tasks.

For those with allergies, the Electrolux 60830 is equipped with a highly efficient filtration system, which captures fine particles and allergens, helping to purify the air as you clean. This is particularly beneficial for households with pets or allergy sufferers, ensuring a healthier living environment.

The design of the Electrolux 60830 emphasizes user comfort and maneuverability. Its lightweight construction and ergonomic handle make it easy to carry and operate, while the flexible hose and various attachments allow users to reach tight corners and high surfaces with ease. Additionally, the vacuum cleaner is designed with a quiet operation mode to minimize noise, making it suitable for use at any time of day without disturbing the household.

In summary, the Electrolux 60830 combines powerful suction, multi-cyclonic technology, and user-friendly design to make it a top choice for anyone seeking an efficient and effective cleaning solution. Whether tackling everyday dust or deep cleaning tasks, this vacuum cleaner is equipped to handle it all while ensuring comfort and convenience for the user.
Top Page Image Contents