Electrolux 60830 manual Water inlet hose with safety valve

Page 44

Installation and Connection Instructions

3

The following section is only applicable to dishwashers that have a

 

safety valve on the threaded hose fitting for the tap:

 

Water inlet hose with safety valve

 

After connecting the double-walled water inlet hose, the safety valve is

 

next to the tap. Therefore the water inlet hose is only under pressure

 

while the water is running. If the water inlet hose starts to leak during

 

this operation, the safety valve cuts off the running water and the

 

draining pump in the dishwasher is switched on.

1

Please take care when installing the water inlet hose:

 

– The distance between the bottom

 

edge of the safety value and the

 

floor on which the dishwasher is

 

standing must be at least 30 cm:

 

– The electrical cable for the safety

 

valve is in the double-walled water

 

inlet hose. Do not immerse the

 

water inlet hose or the safety valve

 

in water.

 

– If the water inlet hose or the safety

 

valve is damaged, remove the

 

mains plug immediately.

 

– A water inlet hose with safety valve

 

must only be replaced by your local

 

Service Force Centre.

 

– Place the water inlet hose in such a way that it is never higher than

 

the bottom edge of the safety valve.

44

Page 43 Page 45
Image 44
Page 43 Page 45
Contents Favorit Tips on using the appliance Dear customerPlease read these user instructions carefully Pass them on to any subsequent owner of the applianceContents Installation and Connection Instructions Safety Instructions Installation, Connection and Placing into OperationChild Safety General SafetyCorrect Use Disposal Economical and Ecological DishwashingDisposing of the Packaging Material Disposal of Old AppliancesAppliance Features and Control Panel Control Panel Multi-Display can displayPrior to using for the first time Control Indicators have the following significancePanel Setting the water softenerNess and hardness range of the water in your area Manual setting Electronic settingWater can be softened in one of two ways Special salt for the water softenerUse special salt or salt substitute Place the funnel supplied on the container opening Adding special saltVated Be cancelled see 3 in 1 function Been started. The programme must be cancelled ResetRinse Aid Activating/deactivating the rinse aid dispenserFully open the rinse aid compartment lid Multi-display will indicate the current settingAdding rinse aid Adjusting Rinse Aid Dosing Not be washed in the dishwasher Daily UseLoading Cutlery and Dishes Loading Cutlery Do not lay small objects e.g. lids in the cutlery rackTioned horizontally in the upper basket Place knives, small spoons and smallBasket Loading Pans, Frying Pans Large Plates Folded over to the leftTo ease the loading of large items Two right-hand plate insertsFolded across one another Across one anotherTwo rear plate inserts in the lower Baskets can be folded across one anotherLoading Cups, Glasses Coffee Services Raising the Upper Basket Adjusting the Height of the Upper BasketLowering the Upper Basket Filling with Detergent Fill with detergentUse of 3 in 1/ Combi Detergent Tablets General AdviceSpecial Advice Automatic Wash Programmes Concentrated DetergentDetergent tablets Selecting the Wash Programme Programme Table Addition Type of SoilingGlass Changing a programme Changing/interrupting/cancelling a programmeStarting a programme Interrupting the programme by opening the dishwasher door Cancelling the programme Reset1 function Setting or changing the start delay Setting the start delayChanging the start delay Cancelling the start delaySwitching Off the Dishwasher Load Sensing Sensor LogicEmptying the Dishwasher Immediately after the end of the programmeCare and Cleaning Cleaning the FilterStances Error messages are displayed What to do, ifAfter remedying the Filter error, shut the door Error codeThere are problems with the operation of the dish- washer Wash results are not satisfactoryDishes are still dirty Dishes are wet and dullThere are dried water drops on the glasses and dishes Technical DataLower rinse aid dosing Lower basket with cutlery basket Sample loading arrangementsUpper basket without cutlery tray Installing the Dishwasher See enclosed installation instructionsBuilt-Under Dishwasher Free-Standing AppliancesPlinth on free-standing appliances is not adjustable Work surface must be re-mountedConnecting the Dishwasher Water ConnectionPermitted water pressure Connect the inlet hoseWater inlet hose with safety valve Please take care when installing the water inlet hoseWater drain Leak Prevention System Appliance is automatically pumped outElectrical Connection Changing a fuseConnections Guarantee Conditions Page Calls may be recorded for training purposes 08705 929Customer Care AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG

60830 specifications

The Electrolux 60830 is a state-of-the-art vacuum cleaner that combines powerful performance with advanced technology to ensure a thorough cleaning experience. Designed for both convenience and efficiency, it caters to a wide range of cleaning needs in modern households.

One of the standout features of the Electrolux 60830 is its impressive suction power, which is driven by a robust motor that provides optimal cleaning performance on various surfaces. The adjustable suction settings allow users to select the appropriate level of power, making it suitable for cleaning delicate fabrics as well as high-traffic carpets. This versatility makes it an ideal choice for families with diverse cleaning requirements.

Another key characteristic of the Electrolux 60830 is its innovative multi-cyclonic technology. This system enhances dust and debris separation from the air, ensuring that the vacuum maintains consistent suction power over time. This means that users don’t have to worry about decreased performance due to clogging or filters needing constant replacement, which ultimately leads to a longer lifespan for the product.

The vacuum cleaner also features a dust container designed for easy emptying, allowing users to dispose of dirt and debris without the hassle of dealing with messy bags. The large capacity of the container minimizes the frequency of emptying, making it perfect for larger cleaning tasks.

For those with allergies, the Electrolux 60830 is equipped with a highly efficient filtration system, which captures fine particles and allergens, helping to purify the air as you clean. This is particularly beneficial for households with pets or allergy sufferers, ensuring a healthier living environment.

The design of the Electrolux 60830 emphasizes user comfort and maneuverability. Its lightweight construction and ergonomic handle make it easy to carry and operate, while the flexible hose and various attachments allow users to reach tight corners and high surfaces with ease. Additionally, the vacuum cleaner is designed with a quiet operation mode to minimize noise, making it suitable for use at any time of day without disturbing the household.

In summary, the Electrolux 60830 combines powerful suction, multi-cyclonic technology, and user-friendly design to make it a top choice for anyone seeking an efficient and effective cleaning solution. Whether tackling everyday dust or deep cleaning tasks, this vacuum cleaner is equipped to handle it all while ensuring comfort and convenience for the user.
Top Page Image Contents