Electrolux 60830 manual Connecting the Dishwasher, Water Connection, Permitted water pressure

Page 43

Installation and Connection Instructions

Connecting the Dishwasher

Water Connection

The dishwasher is fitted with safety devices that prevent the wash water returning into the drinking water system and comply with the applicable plumbing regulations.

•The dishwasher must be connected to a cold water supply.

•The dishwasher must not be connected to open hot water appliances or instantaneous water heaters.

Permitted water pressure

Lowest permitted water pressure:

Consult your installer if the water pres-

1 bar (=10 N/cm2 =100 kPa)

sure is less than 1 bar.

Highest permitted water pressure:

In the case of a water pressure greater

10 bar (=100 N/cm2 =1 MPa)

than 10 bar, a pressure reduction valve

 

must be used (available from your

 

dealer).

 

 

 

Connect the inlet hose

1

The water inlet hose must not be kinked, crushed or entangled when it

 

is being connected up.

0Connect the threaded hose fitting (ISO 228-1:2000) on the water inlet hose to a tap with an external thread (¾ inch). Tighten the threaded hose fitting hand tight only.

3

• In order that access to the tap in the kitchen is not limited by the use

 

of the dishwasher, we recommend the installation of an additional

tap, or fitting a two way adapter to the existing tap.

• If you need a longer water inlet hose than that supplied, VDE approved complete hose sets are to be used. These are available from your local Service Force Centre.

• Do not use, for connection, old hoses which have been used for another appliance.

43

Page 42 Page 44
Image 43
Page 42 Page 44
Contents Favorit Pass them on to any subsequent owner of the appliance Tips on using the applianceDear customer Please read these user instructions carefullyContents Installation and Connection Instructions General Safety Safety InstructionsInstallation, Connection and Placing into Operation Child SafetyCorrect Use Disposal of Old Appliances DisposalEconomical and Ecological Dishwashing Disposing of the Packaging MaterialAppliance Features and Control Panel Multi-Display can display Control PanelControl Indicators have the following significance Prior to using for the first timeNess and hardness range of the water in your area Setting the water softenerPanel Electronic setting Manual settingUse special salt or salt substitute Special salt for the water softenerWater can be softened in one of two ways Vated Adding special saltPlace the funnel supplied on the container opening Activating/deactivating the rinse aid dispenser Be cancelled see 3 in 1 functionBeen started. The programme must be cancelled Reset Rinse AidAdding rinse aid Multi-display will indicate the current settingFully open the rinse aid compartment lid Adjusting Rinse Aid Dosing Loading Cutlery and Dishes Daily UseNot be washed in the dishwasher Place knives, small spoons and small Loading CutleryDo not lay small objects e.g. lids in the cutlery rack Tioned horizontally in the upper basketBasket Two right-hand plate inserts Loading Pans, Frying Pans Large PlatesFolded over to the left To ease the loading of large itemsBaskets can be folded across one another Folded across one anotherAcross one another Two rear plate inserts in the lowerLoading Cups, Glasses Coffee Services Lowering the Upper Basket Adjusting the Height of the Upper BasketRaising the Upper Basket Fill with detergent Filling with DetergentSpecial Advice General AdviceUse of 3 in 1/ Combi Detergent Tablets Detergent tablets Concentrated DetergentAutomatic Wash Programmes Addition Type of Soiling Selecting the Wash Programme Programme TableGlass Starting a programme Changing/interrupting/cancelling a programmeChanging a programme 1 function Cancelling the programme ResetInterrupting the programme by opening the dishwasher door Cancelling the start delay Setting or changing the start delaySetting the start delay Changing the start delayImmediately after the end of the programme Switching Off the DishwasherLoad Sensing Sensor Logic Emptying the DishwasherCleaning the Filter Care and CleaningStances What to do, if Error messages are displayedError code After remedying the Filter error, shut the doorDishes are wet and dull There are problems with the operation of the dish- washerWash results are not satisfactory Dishes are still dirtyLower rinse aid dosing Technical DataThere are dried water drops on the glasses and dishes Upper basket without cutlery tray Sample loading arrangementsLower basket with cutlery basket Free-Standing Appliances Installing the DishwasherSee enclosed installation instructions Built-Under DishwasherWork surface must be re-mounted Plinth on free-standing appliances is not adjustableConnect the inlet hose Connecting the DishwasherWater Connection Permitted water pressurePlease take care when installing the water inlet hose Water inlet hose with safety valveWater drain Appliance is automatically pumped out Leak Prevention SystemChanging a fuse Electrical ConnectionConnections Guarantee Conditions Page Customer Care 08705 929Calls may be recorded for training purposes AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG

60830 specifications

The Electrolux 60830 is a state-of-the-art vacuum cleaner that combines powerful performance with advanced technology to ensure a thorough cleaning experience. Designed for both convenience and efficiency, it caters to a wide range of cleaning needs in modern households.

One of the standout features of the Electrolux 60830 is its impressive suction power, which is driven by a robust motor that provides optimal cleaning performance on various surfaces. The adjustable suction settings allow users to select the appropriate level of power, making it suitable for cleaning delicate fabrics as well as high-traffic carpets. This versatility makes it an ideal choice for families with diverse cleaning requirements.

Another key characteristic of the Electrolux 60830 is its innovative multi-cyclonic technology. This system enhances dust and debris separation from the air, ensuring that the vacuum maintains consistent suction power over time. This means that users don’t have to worry about decreased performance due to clogging or filters needing constant replacement, which ultimately leads to a longer lifespan for the product.

The vacuum cleaner also features a dust container designed for easy emptying, allowing users to dispose of dirt and debris without the hassle of dealing with messy bags. The large capacity of the container minimizes the frequency of emptying, making it perfect for larger cleaning tasks.

For those with allergies, the Electrolux 60830 is equipped with a highly efficient filtration system, which captures fine particles and allergens, helping to purify the air as you clean. This is particularly beneficial for households with pets or allergy sufferers, ensuring a healthier living environment.

The design of the Electrolux 60830 emphasizes user comfort and maneuverability. Its lightweight construction and ergonomic handle make it easy to carry and operate, while the flexible hose and various attachments allow users to reach tight corners and high surfaces with ease. Additionally, the vacuum cleaner is designed with a quiet operation mode to minimize noise, making it suitable for use at any time of day without disturbing the household.

In summary, the Electrolux 60830 combines powerful suction, multi-cyclonic technology, and user-friendly design to make it a top choice for anyone seeking an efficient and effective cleaning solution. Whether tackling everyday dust or deep cleaning tasks, this vacuum cleaner is equipped to handle it all while ensuring comfort and convenience for the user.
Top Page Image Contents