Electrolux 60830 manual Manual setting, Electronic setting

Page 12

Operating Instructions

Setting the water softener

Using the table as a guide, adjust the water softener to that which cor- responds to the hardness of the water in your area:

0The dishwasher must be switched off.

Manual setting:

1.Open the dishwasher door.

2. Remove the lower basket from the dishwasher.

3. Turn the hardness range switch to 0 or 1 (see table).

4.Replace the lower basket.

 

Electronic setting:

 

1. Press the ON/OFF button.

 

The LED in the ON/OFF button will become illuminated.

3

If other indicators are also illuminated, this means that a programme

 

has started. The programme must be cancelled (RESET):

Press function buttons 1 and 2 simultaneously for approx. 2 seconds. All other indicators will go out.

2.Press the function buttons 1 and 2 simultaneously and keep them pressed until the LED indicators for function buttons 1 and 3 flash.

3.Press function button 1again.

The LED indicator for function button 1 will flash. The multi-display will indicate the hardness setting.

4.Pressing function button 1 increases the hardness setting by 1 degree. (Exception: hardness setting 1 follows hardness setting 10).

5.When the hardness setting is correct, press the ON/OFF button. The hardness setting is now saved.

12

Image 12
Contents Favorit Tips on using the appliance Dear customerPlease read these user instructions carefully Pass them on to any subsequent owner of the applianceContents Installation and Connection Instructions Safety Instructions Installation, Connection and Placing into OperationChild Safety General SafetyCorrect Use Disposal Economical and Ecological DishwashingDisposing of the Packaging Material Disposal of Old AppliancesAppliance Features and Control Panel Control Panel Multi-Display can displayPrior to using for the first time Control Indicators have the following significanceSetting the water softener Ness and hardness range of the water in your areaPanel Manual setting Electronic settingSpecial salt for the water softener Use special salt or salt substituteWater can be softened in one of two ways Adding special salt VatedPlace the funnel supplied on the container opening Be cancelled see 3 in 1 function Been started. The programme must be cancelled ResetRinse Aid Activating/deactivating the rinse aid dispenserMulti-display will indicate the current setting Adding rinse aidFully open the rinse aid compartment lid Adjusting Rinse Aid Dosing Daily Use Loading Cutlery and DishesNot be washed in the dishwasher Loading Cutlery Do not lay small objects e.g. lids in the cutlery rackTioned horizontally in the upper basket Place knives, small spoons and smallBasket Loading Pans, Frying Pans Large Plates Folded over to the leftTo ease the loading of large items Two right-hand plate insertsFolded across one another Across one anotherTwo rear plate inserts in the lower Baskets can be folded across one anotherLoading Cups, Glasses Coffee Services Adjusting the Height of the Upper Basket Lowering the Upper BasketRaising the Upper Basket Filling with Detergent Fill with detergentGeneral Advice Special AdviceUse of 3 in 1/ Combi Detergent Tablets Concentrated Detergent Detergent tabletsAutomatic Wash Programmes Selecting the Wash Programme Programme Table Addition Type of SoilingGlass Changing/interrupting/cancelling a programme Starting a programmeChanging a programme Cancelling the programme Reset 1 functionInterrupting the programme by opening the dishwasher door Setting or changing the start delay Setting the start delayChanging the start delay Cancelling the start delaySwitching Off the Dishwasher Load Sensing Sensor LogicEmptying the Dishwasher Immediately after the end of the programmeCare and Cleaning Cleaning the FilterStances Error messages are displayed What to do, ifAfter remedying the Filter error, shut the door Error codeThere are problems with the operation of the dish- washer Wash results are not satisfactoryDishes are still dirty Dishes are wet and dullTechnical Data Lower rinse aid dosingThere are dried water drops on the glasses and dishes Sample loading arrangements Upper basket without cutlery trayLower basket with cutlery basket Installing the Dishwasher See enclosed installation instructionsBuilt-Under Dishwasher Free-Standing AppliancesPlinth on free-standing appliances is not adjustable Work surface must be re-mountedConnecting the Dishwasher Water ConnectionPermitted water pressure Connect the inlet hoseWater inlet hose with safety valve Please take care when installing the water inlet hoseWater drain Leak Prevention System Appliance is automatically pumped outElectrical Connection Changing a fuseConnections Guarantee Conditions Page 08705 929 Customer CareCalls may be recorded for training purposes AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG

60830 specifications

The Electrolux 60830 is a state-of-the-art vacuum cleaner that combines powerful performance with advanced technology to ensure a thorough cleaning experience. Designed for both convenience and efficiency, it caters to a wide range of cleaning needs in modern households.

One of the standout features of the Electrolux 60830 is its impressive suction power, which is driven by a robust motor that provides optimal cleaning performance on various surfaces. The adjustable suction settings allow users to select the appropriate level of power, making it suitable for cleaning delicate fabrics as well as high-traffic carpets. This versatility makes it an ideal choice for families with diverse cleaning requirements.

Another key characteristic of the Electrolux 60830 is its innovative multi-cyclonic technology. This system enhances dust and debris separation from the air, ensuring that the vacuum maintains consistent suction power over time. This means that users don’t have to worry about decreased performance due to clogging or filters needing constant replacement, which ultimately leads to a longer lifespan for the product.

The vacuum cleaner also features a dust container designed for easy emptying, allowing users to dispose of dirt and debris without the hassle of dealing with messy bags. The large capacity of the container minimizes the frequency of emptying, making it perfect for larger cleaning tasks.

For those with allergies, the Electrolux 60830 is equipped with a highly efficient filtration system, which captures fine particles and allergens, helping to purify the air as you clean. This is particularly beneficial for households with pets or allergy sufferers, ensuring a healthier living environment.

The design of the Electrolux 60830 emphasizes user comfort and maneuverability. Its lightweight construction and ergonomic handle make it easy to carry and operate, while the flexible hose and various attachments allow users to reach tight corners and high surfaces with ease. Additionally, the vacuum cleaner is designed with a quiet operation mode to minimize noise, making it suitable for use at any time of day without disturbing the household.

In summary, the Electrolux 60830 combines powerful suction, multi-cyclonic technology, and user-friendly design to make it a top choice for anyone seeking an efficient and effective cleaning solution. Whether tackling everyday dust or deep cleaning tasks, this vacuum cleaner is equipped to handle it all while ensuring comfort and convenience for the user.