Electrolux 55750 Cleaning the fine strainer, Cleaning the spray arm nozz les, Roof spray arm

Cleaning the fine strainer

The fine strainer must be cleaned from time to time:

-Unlock the strainer by turning it to position A, lift out the fine strainer and clean it under running wa￿ ter with a brush.

-Place the strainer in its holder and secure it by tur￿ ning to position B.

Cleaning the spray arm nozz￿ les

Regularly check the nozzles on the three spray arms for blockages. If necessary, clean out the nozzles with a fine wire or a fine pin and a strong jet of water.

Take care not damage the nozzle openings.

Roof spray arm

Remove the roof spray arm:

-Loosen the securing screw (A) by turning to the left.

-Pull the spray arm from the shaft.

-Clean the spray arm and the securing screw.

-Refix the spray arm with the securing screw (A) by turning to the right.

Central spray arm

-Remove the central spray arm by turning it to the side, and hoisting off.

The two-part spray arm bearing is held together by a clamping spring (B).

-To re-install, press the central spray arm upwards until you can feel it locking into place.

Lower spray arm

Remove the lower spray arm:

-Loosen the nut (C) by turning it to the left

-Pull the spray arm from the shaft

-Clean the nozzles

-Refix the spray arm with the nut (C) by turning to the right.

A

B

A

B

C

19