Electrolux 55750 manual General Hints & Tips, To save energy, For best washing and drying results

Page 6

General Hints & Tips

To save energy:

Do not prewash dishes under running water.

Wait until the dishwasher is full before washing a load. If necessary use the rinse and hold button.

If washing a reduced quantity of dishes up to maxi￿ mum of 50% of the capacity, use the half load but￿ ton (1/2).

Always select a wash programme suitable for the type of crockery being washed and to the level of soiling (See Programme Chart).

Follow the detergent dosage recommendations in this instruction book and the detergent manufac￿ turers instructions. Never over dose or under dose.

Ensure the water softener is correctly set.

For best washing and drying results

Before loading remove all scraps of food and soak very heavily soiled pots and pans.

Arrange saucepans, cups and glasses etc. upside down.

Tilt items with convex or concave surfaces so the water drains off easily.

Avoid contact between the dishes as far as possible.

Wait a few minutes before removing the dishes; in this way they will be cooler and the drying will be improved.

Empty the lower basket first and then the upper basket; this will avoid water dripping from the up￿ per basket onto the dishes in the lower one.

You will improve drying results by leaving the dish￿ washer door ajar for at least 15-30 minutes as soon as the programme finishes.

Items not suitable for dishwashers.

The following items should not be washed in the dishwasher (unless they are sold as dishwasher proof).

Cutlery with wooden or horn handles or glued parts

Bronze cutlery

Saucepans with wooden handles

Aluminium ware

Crystal ware

Leaded glass

Plastic items

Antique or fine decorated china

Tin and copper items

Artistic objects

Wooden board

Crockery that may be suitable:

Earthenware crockery can be washed in the dish￿ washer if the manufacturer has indicated that it is suitable.

Some glazed finishes may fade after frequent ma￿ chine washing.

Silver and aluminium parts tend to discolour during machine washing.

Copper, pewter and brass tend to stain.

A chemical reaction can occur between silver cut￿ lery and stainless steel cutlery. As a precaution do not wash together.

Iron and cast iron objects can rust and stain other items.

Certain types of decoration can discolour when washed in a dishwasher.

If in doubt check with the manufacturer of the item. When buying new dishes, ensure that they are dishwas￿ her proof.

For best results we recommend the use of Finish detergents, rinse aid and salt.

6

Image 6
Contents ÖKO-FAVORIT Dear Customer Please read these operating instructions carefullyContent Filling with detergent Selecting and starting the programSafety Instructions Child SafetyDescription of the Appliance DishwasherControl Panel For best washing and drying results General Hints & TipsTo save energy Items not suitable for dishwashersFilling with Rinse Aid Prior to Using for the First TimeSetting the rinse aid dosage Filling the salt dispenserSetting the Water Softener First wash cycleCutlery basket Crockery BasketLower basket Removing the cutlery basket topAdjustable plate rail, right, 10 piece Adjustable plate rail insert, 5 pieceUpper basket Adjustable glass holderAdjustable Cup Support Hinged plate rail, leftUpper basket is adjustable to the right Filling with detergent Selecting and starting the programProgram display Safety lockDelay start Remaining running timeECO button Program Chart Error codes and possible causes Mains power lossError message Unloading the crockery basketCleaning the large strainer Cleaning and careInternal Cleaning Re-filling the salt dispenserRoof spray arm Cleaning the fine strainerCleaning the spray arm nozz les Central spray armCleaning the appliance Appliances with stainless steel outer surfacesRemedying faults Service & Spare Parts 08705Customer Care Technical Data Information for Test Institutes Loading exampleInstallation Instructions Water Supply ConnectionsWater outlet hose connection Electrical Connection Changing a fusePermanent connection Assembly Instructions for the Side Rail Assembly Kit Procedure570Installation Technical Data