Electrolux 55750 manual Installation, Technical Data

Installation

•Stick on the damp protection film as described in the instructions on the rear side of the film (shorten where necessary).

•Attach the side rails to the side panels of the furni￿ ture as described in the separate assembly instruc￿ tions.

•Place the appliance in front of the high cupboard, and run the cable and hoses through the high cup￿ board's bay so that they are neither kinked or squas￿ hed.

•Align the dishwasher in the centre of the bay and flush with the side panels, and where necessary, ad￿ just to be flush at the front surface using shims.

•Carefully open the door of the appliance without changing the settings of the appliance.

•Using the pre-drilled holes, screw the appliance to the side panels of the furniture on both sides in the upper inner area (see Detail A).

•Before screwing the appliance diagonally through the base plate using two additional screws (always pre-drill), it is advisable to protect the appliance door from damage using suitable materials (e.g. the cardboard packaging). In order to tighten these screws, the door must be opened by approx. 45 de￿ grees (see Detail B).

Technical Data

Dimensions
Height	75.9 cm
Depth	57.0 cm
Width	54.6 cm
Capacity	12 place settings
Electrical connection	230-240V ￿ 50Hz
Motor rating during wash	140	W
Power of heating element	2000	W
Overall power	2150	W
Water supply pressure	Minimum 1bar
	Maximum 10 bar

Detail A

Detail B

AEG 153 0409 20 / 09.99