ECO button

A washing program can be selected first, and then the pre-selected start time can be pro grammed, or vice versa.

If a pre-selected start time is programmed without a washing program, the programmed time goes out after 5 seconds. After selecting a program, the selection of the start delay must take place within 5 seconds.

An activated pre-selected start time will be indicated in the display field by a blinking dot.

After the pre-selected start time has expired, the machine starts up the selected program automati cally.

Correcting or Deleting the Program Selection / Pre-se lected Start Time

Using the Stop button, a running program or the pre- selected start time can be interrupted or cancelled.

Interruption:

-Briefly activating the Stop button causes an inter ruption of all programs, and the Stop control lamp blinks.

-Activating the Stop button again makes the pro gramming active once again.

Cancelling:

-Holding down the Stop button longer than 2 se conds deletes the program and the pre-selected start time, and any water present will be pumped out. The Program End symbol in the display lights up as soon as all the water has been pumped out.

The wash temperature is reduced using the ECO button, as a result less energy is consumed during heating up. The economy button can be selected for all wash pro grams.

The ECO button should be used in particular when using low-alkali compact cleaners with enzymes. The enzymes produce their full dirt-releasing effect in a temperature range between 40 and 50 °C.

Half load Mains switch

Economy