12Use of dishwasher salt
Setting electronically
The dishwasher is factory set at level 5.
1.Press the On/Off button. The dishwasher must be in setting mode.
2.Press simultaneously and keep pressed buttons B and C, until the lights of buttons A, B and C start flashing.
3.Press button A, the lights of buttons B and C turn off while the light of button A goes on flashing. In the digital display is visible the current level.
Examples:
displayed = level 5 displayed = level 10
4.To change the level, press button A. Each time the button is pressed the level changes (for the selection of the new level see the chart).
Examples: if the current level is 5, by pressing button A once, level 6 is selected. if the current level is 10, by pressing button A once, level 1 is selected.
5.To memorise the operation, switch off the dishwasher by pressing the On/Off button.
Use of dishwasher salt
WARNING!
Only use salt specifically designed for use in dishwashers. All other types of salt not specifically designed for use in a dishwasher, especially table salt, will damage the water softener. Only fill with salt just before starting one of the complete washing programmes. This will prevent any grains of salt or salty water, which may have been spilt, remaining on the bottom of the machine for any period of time, which may cause corrosion.
To fill:
1.Open the door, remove the lower basket and unscrew the cap of the salt container by turning it anticlockwise.
2.Pour 1 litre of water inside the container (this is necessary only before filling with salt for the first time) .