Care and cleaning 27
2. The dishwasher filter system compri- ses a coarse filter (A), a microfilter (B) and a flat filter. Unlock the filter system using the handle on the mi- crofilter, and remove the filter system.
3. Turn the handle about 1/4 a turn an- ticlockwise and remove the filter sys- tem.
4. Take hold of the coarse filter (A) by the
handle with the hole and remove from the microfilter (B).
5. Clean all filters thoroughly under run- ning water.
6. Remove the flat filter from the base of the washing compartment and clean both faces thoroughly.
7. Put the flat filter back in the base of the washing compartment and en- sure that it fits perfectly.
8.Place the coarse filter (A) in the mi- crofilter (B) and press together.
9.Put the filter combination in place and lock by turning the handle clock- wise to the stop. During this process
ensure that the flat filter does not protrude above the base of the washing compartment.
WARNING!
NEVER use the dishwasher without filters. Incorrect repositioning and fitting of the filters will produce poor washing results and may result in damage to the appliance.