Electrolux 50877 user manual Setting and starting the programme with delay start

Page 25

Select and start a washing programme 25

Setting and starting the programme with "delay start"

1.After having selected the washing programme, press the delay start button until the flashing number of hours for the delay start will appear in the digital display. You can choose from 1 to 19 hours of delay.

2.Close the dishwasher's door, the countdown starts automatically.

The number in the display is no longer flashing but fixed with static light.

3.The countdown will decrease with steps of 1 hour.

4.The opening of the door will interrupt the countdown.

5.Once the delay start has elapsed the programme will start automatically.

With the delay start function set, the programme in progress indicator light is off. Once the countdown of the delay start has elapsed, the washing programme will start automatically and the programme in progress indicator light will illu- minate.

The selection of the washing programme and delay start can also occur with the door closed. Keep in mind that in this way, once a washing programme button is pressed you have ONLY 3 seconds in which you can choose another programme or select a delay start, after which the selected programme will start automatically.

Cancelling the "delay start" and / or a washing programme

To cancel a delay start in progress you have to reset the dishwasher.

Cancelling a delay start involves also the cancelling of the washing programme set. In this case you have to set the washing programme again. If a new washing programme is to be selected, check that there is detergent in the detergent dispenser.

WARNING!

Interrupt or cancel a washing programme in progress ONLY if it's absolutely necessary. Attention! Hot steam may escape when the door is opened. Open the door carefully.

Interrupt a washing programme in progress:

Open the dishwasher door; the programme will stop. Close the door; the pro- gramme will start from the point at which it was interrupted.

Press the On/Off button, all lights will turn off. Press the On/Off button again; the programme will start from the point at which it was interrupted.

End of the washing programme

• The dishwasher will automatically stop.

Image 25
Contents Favorit Dear Customer Contents Installation instructions Correct use Operating instructions Safety informationChild safety General safetyInstallation Product description Control panel Indicator lightsDigital display Setting modeFunction buttons Digital display indicatesFirst use To cancel a set programme or a programme in progressSet the water softener Set the water softener Setting manuallyUse of dishwasher salt Setting electronicallyExamples To fillOnly use branded rinse aid for dishwashers Use of rinse aidDaily use Adjusting the dosage of rinse aidLoad cutlery and dishes Lower basket Cutlery basket Upper basket Raising / lowering the upper basket Adjusting the height of the upper basketFill with detergent Use of detergentDetergent tablets Multi-tab functionActivation/deactivation of the rinse aid dispenser Activation/deactivation of the Multitab functionWashing programmes Select and start a washing programme Cancelling the delay start and / or a washing programme Setting and starting the programme with delay startInterrupt a washing programme in progress End of the washing programmeCleaning the filters Care and cleaningUnloading the dishwasher Clean all filters thoroughly under run- ning water External cleaning Cleaning the spray armsInternal cleaning Frost precautionsWhat to do if… Remove the water inlet and discharge hoses What to do if…Programme does not start Technical data Technical dataHints for test institutes Example loading arrangements Fitting under a counter kitchen worktop or sink InstallationProceed as follows Water supply connections LevellingLocknut must be correctly fitted to avoid water leaks Water outlet hose connection Sink trap spigot, the entire plastic mem Electrical connectionPackaging material Environment concernsPage 117970660-12022008