Electrolux 50877 user manual Programme does not start

Page 30

30	What to do if…


	Fault code and malfunction		Possible cause and solution
	The programme does not start.	•	The dishwasher’s door has not been properly
			closed. Close the door.
		•	The main plug is not plugged in. Insert the
			main plug.
		•	The fuse has blown out in the household fuse
			box.
			Replace the fuse.
		•	Delay start has been set.
			If dishes are to be washed immediately, cancel
			the delay start.

Once these checks have been carried out, switch on the appliance: the programme will continue from the point at which it was interrupted.

If the malfunction or fault code reappears contact the Service Force Centre.

For other fault codes not described in the above chart, please contact your local Service Force Centre, quoting the model (Mod.), product number (PNC) and serial number (S.N.).

This information can be found on the rating plate located on the side of the dishwasher door.

So that you always have these numbers at hand, we recommend you to make a note of them here:

Mod. : . . . . . . . . . . . . . . . . . . . . . . .

PNC :. . . . . . . . . . . . . . . . . . . . . . . .

S.N. : . . . . . . . . . . . . . . . . . . . . . . . .

Image 30

Contents Favorit Dear Customer Contents Installation instructions Operating instructions Safety information Correct useGeneral safety Child safetyInstallation Product description Indicator lights Control panelFunction buttons Setting modeDigital display Digital display indicatesTo cancel a set programme or a programme in progress First useSet the water softener Setting manually Set the water softenerExamples Setting electronicallyUse of dishwasher salt To fillUse of rinse aid Only use branded rinse aid for dishwashersAdjusting the dosage of rinse aid Daily useLoad cutlery and dishes Lower basket Cutlery basket Upper basket Adjusting the height of the upper basket Raising / lowering the upper basketUse of detergent Fill with detergentMulti-tab function Detergent tabletsActivation/deactivation of the Multitab function Activation/deactivation of the rinse aid dispenserWashing programmes Select and start a washing programme Interrupt a washing programme in progress Setting and starting the programme with delay startCancelling the delay start and / or a washing programme End of the washing programmeCare and cleaning Cleaning the filtersUnloading the dishwasher Clean all filters thoroughly under run- ning water Internal cleaning Cleaning the spray armsExternal cleaning Frost precautionsWhat to do if… What to do if… Remove the water inlet and discharge hosesProgramme does not start Technical data Technical dataHints for test institutes Example loading arrangements Installation Fitting under a counter kitchen worktop or sinkProceed as follows Levelling Water supply connectionsLocknut must be correctly fitted to avoid water leaks Water outlet hose connection Electrical connection Sink trap spigot, the entire plastic memEnvironment concerns Packaging materialPage 117970660-12022008