Electrolux 50877 user manual Hints for test institutes

Page 32

32Hints for test institutes

Hints for test institutes

Testing in accordance with EN 60704 must be carried out with appliance fully loaded and using the test programme (see "Washing programmes").

Test in accordance with EN 50242 must be carried out when the salt container and rinse aid dispenser have been filled with salt and rinse aid respectively and using the test programme (see "Washing programmes").

Full load: 12 standard place settings

Amount of detergent required:	5 g + 25 g (Type B)
Rinse aid setting:	position 4 (Type III)

Image 32

Contents Favorit Dear Customer Contents Installation instructions Operating instructions Safety information Correct useInstallation General safetyChild safety Product description Indicator lights Control panelSetting mode Digital displayFunction buttons Digital display indicatesSet the water softener To cancel a set programme or a programme in progressFirst use Setting manually Set the water softenerSetting electronically Use of dishwasher saltExamples To fillUse of rinse aid Only use branded rinse aid for dishwashersAdjusting the dosage of rinse aid Daily useLoad cutlery and dishes Lower basket Cutlery basket Upper basket Adjusting the height of the upper basket Raising / lowering the upper basketUse of detergent Fill with detergentMulti-tab function Detergent tabletsActivation/deactivation of the Multitab function Activation/deactivation of the rinse aid dispenserWashing programmes Select and start a washing programme Setting and starting the programme with delay start Cancelling the delay start and / or a washing programmeInterrupt a washing programme in progress End of the washing programmeUnloading the dishwasher Care and cleaningCleaning the filters Clean all filters thoroughly under run- ning water Cleaning the spray arms External cleaningInternal cleaning Frost precautionsWhat to do if… What to do if… Remove the water inlet and discharge hosesProgramme does not start Technical data Technical dataHints for test institutes Example loading arrangements Proceed as follows InstallationFitting under a counter kitchen worktop or sink Locknut must be correctly fitted to avoid water leaks LevellingWater supply connections Water outlet hose connection Electrical connection Sink trap spigot, the entire plastic memEnvironment concerns Packaging materialPage 117970660-12022008