|
|
| Technical data |
| 31 |
|
|
|
|
|
|
|
|
|
|
|
|
| The wash results are not satisfactory |
| |||
| The dishes are not clean | • | The wrong washing programme has been se- | ||
|
|
| lected. |
| |
|
| • | The dishes are arranged in such a way as to | ||
|
|
| stop water reaching all parts of the surface. | ||
|
|
| The baskets must not be overloaded. |
| |
|
| • | The spray arms do not rotate freely due to | ||
|
|
| incorrect arrangement of the load. |
| |
|
| • | The filters in the base of the washing com- | ||
|
|
| partment are dirty or incorrectly positioned. | ||
|
| • | Too little or no detergent has been used. |
| |
|
| • | Where there are limescales deposits on the | ||
|
|
| dishes; the salt container is empty or the in- | ||
|
|
| correct level of the water softener has been | ||
|
|
| set. |
| |
|
| • | The drain hose connection is not correct. | ||
|
| • | The salt container cap is not properly closed. | ||
| The dishes are wet and dull | • | Rinse aid was not used. |
| |
|
| • | The rinse aid dispenser is empty. |
| |
| There are streaks, milky spots or a bluish coating | • | Decrease rinse aid dosing. |
| |
| on glasses and dishes |
|
|
|
|
|
|
|
|
|
|
| Water drops have dries onto glasses and dishes | • | Increase rinse aid dosing. |
| |
|
| • | The detergent may be the cause. Contact the | ||
|
|
| detergent manufacturer’s consumer care line. | ||
|
|
|
|
|
|
If after all these checks, the problem persists, contact your local Service Force Cen- tre.
Technical data
Dimension |
| Width - height - depth (cm) | 60 x 85 x 63,5 |
Electrical connection - Voltage |
| Information on the electrical connection is given on the rating | |
- Overall power - Fuse |
| plate on the inner edge of the dishwasher's door | |
|
|
|
|
Water supply pressure |
| Minimum - Maximum (MPa) | 0,05 - 0,8 |
Capacity |
| Place settings | 12 |
Max. weight |
| kg | 45 |
|
|
|
|