Electrolux AOW101E manual Oven Door Opening, Description of Control Panel, Oven Door Closing

EN

1. OVEN DOOR OPENING

The oven is equipped with a safety system to prevent you being exposed to steam when opening the door completely, therefore carry out the following operations, according to the model:

1.1 6- AND 10-RACK MODELS

Caution! Risk of burns.

Always open the door with caution when the oven is hot.

a)Turn the oven door handle counter-clockwise as far as it will go. The door opens slightly and is stopped by the door safety device. If there is a cooking program in progress it will be interrupted but will continue when door is closed.

3. DESCRIPTION OF CONTROL PANEL

3.1 FOREWORD

For easy understanding of oven operation, when reading keep the flap relating to the control panel of your model open, identify- ing it from those given on the last pages of this manual.

All the functions available in the various models of the range are described below.

Certain functions are shared by all models, whereas others are available only on some versions.

3.2 BASIC CONTROLS

Main switch

Cooking cycle/program Start/stop.

b)Turn the door handle to the vertical position and then pull outwards, the door will offer light resistance and then open completely.

GRAPHIC DISPLAY management controls : buttons for select- ing oven control mode.

GRAPHIC DISPLAY

Graphic display for showing all available oven functions.

2. OVEN DOOR CLOSING

2.1 6- AND 10-RACK MODELS

a)Turn the door handle counter-clockwise as far as it will go and press the door closed against the oven.

b)Keeping the door pressed closed, lock it by turning the handle to the vertical position.

P1-P2-P3-P4 Button for selecting the functions shown on the

GRAPHIC DISPLAY.

Press this button once to select the function shown above the arrow.

KKnob for selecting and setting the values of each function.

5958 992 00

20