Electrolux AOW101E Additional Functions, Maintenance Service, Abc, Steam generator status light

Page 22

EN

3.5 ADDITIONAL FUNCTIONS

Preheat or cooking: indicates (in AUTOMATIC) that the oven is preheating the compartment (please wait) or cooking.

Warning light signalling oven door open.

Scale light: when this light comes on, the steam generator must be descaled. Follow the instructions given in par. 7.

Introduce food (and insert core probe): indicates (in AUTO- MATIC) that the oven is ready for loading food and possibly for inserting the core probe in the product to be cooked.

Higher core temperature?: enables the core probe tempera- ture to be increased at end of cycle (in AUTOMATIC).

More time?: enables the cooking time to be increased at end of cycle (in AUTOMATIC).

Cooking with phases in sequence: for setting cooking programs with several phases in automatic sequence (max. 6 phases).

- MANUAL -

Skip PHASE: for going from the phase in progress to the next.

- AUTOMATIC -

Display from AUTOMATIC to MANUAL: enables (in Manual mode) control of the corresponding cooking parameters set in Automatic mode.

D

DELAY START - (delayed cycle start): enables the cooking

cycle to be started later, by setting the required time.

Maintenance (Service)

A number of functions necessary for oven maintenance.

Display of current cooking parameters: press the corresponding button to check the compartment temperature and humidity values, the core probe temperature and cycle duration at any time during cooking.

Cleaning System: automatic oven cleaning cycle (refer to par. 7.

CLEANING AND MAINTENANCE).

ABC

Steam generator status light:

A - generator in filling phase or no water. Make sure water reaches the oven!

B - generator in preheating phase.

C - generator ready (light off).

Information: press this button for important help regarding the functions, and instructions on how to proceed.

Manual injection of water in compartment: for instantly increas- ing the moisture level during a cooking cycle.

Manual draining of steam generator water: press the button to drain water from the steam generator.

Important! In order to reduce excessive scaling in the steam generator, make sure to:

respect the parameters regarding the water supply – see installation;

always drain the generator at the end of each day.

Fast compartment cooling: useful for going from one type of cooking to another at lower temperature; it enables fan rotation and automatic injection of water (TS < 180°C) even with the door open.

Caution! Risk of burns.

Always open the door with caution when the oven is hot.

Before using the oven, make sure:

-the external electric safety switch is on;

-the water shutoff cocks are open;

-the oven outlets are not blocked.

5958 992 00

22

Image 22
Contents Fours À CONVECTION/VAPEUR MICRO-ONDES Électriques Electrics Heated Microwave Steam Convection OvensForni CONVEZIONE/VAPORE Microonde Elettrici Hornos Microondas DE Convección Y Vapor ElectricosImportant Safety Instructions Save These InstructionIstruzioni Importanti PER LA Sicurezza Conservare Queste IstruzioniConserver CES Instructions Consignes DE Sécurité ImportantesConserve Estas Instrucciones Importantes Instrucciones DE SeguridadUSA CDN Inthenextpicture Mod GN 1/1 Attacco acqua Conden. fumane Ø3/4 Water conn No Text on this III. Operating Instructions Technical DataAppliance Identification Oven USEAppliance Description General CharacteristicsTechnical Data Operating LevelSafety of the appliance and invalidate the guarantee General InstructionsDisposal CleaningEnvironment PackingPositioning II. Installation InstructionsPlace of Installation Electrical ConnectionWater Connection Power Cable InstallationSupply Water Characteristics Water Draining SystemOperation Check Safety DeviceMaintenance Waring Blocking the Drain is HazardousPositioning of Main Components Brief Troubleshooting GuideIncorrect oven compartment temperature thermostatting Oven goes off. Possible causesIII. Operating Instructions Microwave InstructionsDescription of Control Panel Oven Door OpeningOven Door Closing Special Cooking Modes UtilitiesABC Maintenance ServiceAdditional Functions Steam generator status lightOven USE Switching the Oven onOperating Level a Cooking Higher Temperature AT Core ? P2 P4Selecting Cooking Mode Setting Cooking CycleSetting Cooking Cycle -- Selecting Cooking Mode Stopping the Cooking Cycle AutomaticP2 P3 Setting Cooking TemperatureSetting Cooking Time Starting the cycleMicrowave Setting Core probe mode deactivation.Operationis only possibleSetting Cooking Humidity Only in CONVECTION, Combi and Regeneration cooking modesStopping of Cooking Cycle Manual Support Function Settings Manual Cycle Continuous CookingUtilities P1 P3 Program Program ControlStoring Recipes or Programs P1 P2 P3 P4USE of Prestored Programs or Recipes Search of Recipes or ProgramsLanguage Settings Basic DataTime and Date Modifying SET ParametersSwitching OFF in Case of Fault Information and ErrorsCleaning and Maintenance ING Cooking Cycle ManualMethod with Chemical Descaler Periodical Steam Generator MaintenanceReplacing Consumable Components Replacing the compartment lighting lamp FigParticular Cleaning Replacing door seals Fig