EN
4.4.2 SETTING COOKING TEMPERATURE
1)Press the button P2 ( 
) several times to select the compart- ment cooking TEMPERATURE field 
and set it as required with knob K.
E.g.0
COMPARTMENT
TEMPERATURE 300°F
300
0
P1 P2
Note
The steam cycle has an operating temperature automatically set to212°F (100°C). Low temperature steam can be set from 77°F (25°C) to 211°F (99°C) by turning the corresponding knob.; superheated steam (temperature from 213°to 266°F) (from101° to 130°C).
4.4.3 SETTING COOKING TIME
1)Press the button P2 (
) several times to select the cooking
TIME 
field of the phase and set that required with the knob K.
(display with one TIMED PHASE)
1:
00
Eg.: (TIMED PHASE) | |
TIME 1 hour | |
(display with several TIMED PHASES) |
|
Eg.: | 1:00 |
2:30 | |
TOTAL REMAINING_________ |
|
TOTAL PHASES
2 hours and 30 minutes
4.4.4SETTING AND USE OF CORE PROBE (PRODUCT CORE TEMPERATURE CONTROL)
The core probe allows accurate control of the core temperature of the product being cooked. This allows setting of the required value and automatic stopping of cooking when that value is reached.
Important: The core probe is a precision component. Absolutely avoid impacts, forcing when inserting and pulling of the flexible cable (in particular when using the
1)Switch the oven on.
2)Select the required cooking mode (4.4.1SELECTING COOK- ING MODE) and set the cooking temperature in the field 
.
3)First, press the button P2 ( 
) several times to select the time field 
.
P2 P3
then press the button P3 (
) to display the CORE PROBE field 
and set the required temperature with knob K.
The starting value is 50°F "10°C"( max 210°F "99°C").
(display without TIMED PHASES)
65
E.g.
SET CORE PROBE
TEMPERATURE 65°C
(display with TIMED PHASES)
E.g. | 1:30 | 65 |
TOTAL TIME _____
FOR PHASES 1 hour and 30 minutes
4)Starting the cycle.
-make sure the oven door is closed;
-Press the START/STOP button (the message PREHEAT ap- pears)
Preheating is automatic for any cooking cycle set; to skip it, press the button P3 ( ) or go to the next point.
- Wait until the compartment temperature field indicates the reach- ing of preheating temperature (the message LOAD appears).
- Open the door and introduce the product to be cooked.
Caution! Risk of burns.
Always open the door with caution when the oven is hot.
Remove the core probe “C” from its seat “D” and insert it in the product without forcing excessively, making sure the tip (the sen- sitive part) is positioned near the center of the product.
MULTIPOINT
5958 992 00
26