Electrolux DFKTWC75GS installation instructions Verify package contents

Page 6

6Verify package contents

Unpack hood and check contents. You should receive:

1 - Hood

1 - Decorative Flue Assembly

1 - Parts Bag containing:

1 - Mounting Bracket

1 - Discharge Collar

1 - Flue Mounting Bracket

6 - Mounting Screws (4,8 x 38mm Pan Head)

7 - Mounting Screws (3,9 x 9,5mm Pan Head)

2 - Mounting Screws (3.9 x 6mm Flat Head)

6 - Drywall Anchors

2 - Grease Filters

1 - Installation Instructions

1 - Warranty Card

DECORATIVE

FLUE

GREASE FILTERS

MOUNTING BRACKET

DISCHARGE	7 MOUNTING
COLLAR	7 MOUNTING
	SCREWS (3,9 x
	9,5mm Pan Head)

2 MOUNTING SCREWS

(3.9 x 6mm Flat Head)

FLUE MOUNTING

BRACKET

6 MOUNTING SCREWS	6 DRYWALL
(4,8 x 38mm Pan Head)	ANCHORS

Image 6

Contents Use & Care Guide Installation Instructions Page Please read and save this guide Table of contentsFinding Information Keep a record for quick referenceSafety Important Safety InstructionsIntegral Disconnecting Switch Verify package contents Installation Install the ductworkTo reduce the risk of fire, use only metal ductwork Wiring 33-7/16Improper grounding can result in a risk of electric shock Install mounting bracket Install flue mounting bracket DUCTEDANDNON-DUCTEDPrepare the hood Ducted CONFIGURATIONNON- Ducted Configuration Install the hood At least two people will be required to mount the hoodRooms with 10-FOOT Ceilings Prior to use, remove protective film from the filter frame Install filtersDucted and NON-DUCTED Hoods NON-DUCTED Hoods onlyMaintenance Grease filters Hood cleaningNon-Ducted Recirculation filters Operation ControlsHalogen bulbs Fuse replacement Switch OFF the Electricity SupplyWarranty Information WarrantyPage 04307838/3S