Electrolux DFKTWC75GS Halogen bulbs Fuse replacement, Switch OFF the Electricity Supply

Page 17

Operation 17

Halogen bulbs	Fuse replacement

This range hood requires two halogen bulbs (max 20W, 12V, Type T3 bulb, G4 Base).

Halogen Bulb Key : 5304454951

ALWAYS SWITCH OFF THE ELECTRICITY SUPPLY BEFORE CARRYING OUT ANY OPERATIONS ON THE APPLIANCE.

To change bulbs:

1.Open the cover by prying from the proper slots. - DO NOT ROTATE. CAUTION: BULB MAY BE HOT!

3.Replace with a max 20W, 12V, Type T3 bulb, G4 Base bulb. Do not touch replacement bulb with bare hands! If the bulb is touched with the bare hand, it should be cleaned with a lint-free cloth moistened with methylated spirit.

SWITCH OFF THE ELECTRICITY SUPPLY.

Remove the grease filters.

Open the fuse box.

Replace with the same type of fuse (5x20mm, 4A, 125V).

Fuse Key : 5304455332

FUSE

FUSE BOX

Image 17

Contents Use & Care Guide Installation Instructions Page Finding Information Table of contentsPlease read and save this guide Keep a record for quick referenceImportant Safety Instructions SafetyIntegral Disconnecting Switch Verify package contents To reduce the risk of fire, use only metal ductwork InstallationInstall the ductwork Improper grounding can result in a risk of electric shock Wiring33-7/16 DUCTEDANDNON-DUCTED Install mounting bracket Install flue mounting bracketPrepare the hood Ducted CONFIGURATIONNON- Ducted Configuration At least two people will be required to mount the hood Install the hoodRooms with 10-FOOT Ceilings Ducted and NON-DUCTED Hoods Install filtersPrior to use, remove protective film from the filter frame NON-DUCTED Hoods onlyNon-Ducted Recirculation filters MaintenanceGrease filters Hood cleaning Controls OperationSwitch OFF the Electricity Supply Halogen bulbs Fuse replacementWarranty Warranty InformationPage 04307838/3S