Installation 9
Install mounting bracket | Install flue mounting bracket | |
|
|
|
1.Construct wood wall framing that is flush with inte- rior surface of wall studs.
Make sure:
a)the framing is centered over installation loca- tion.
b)the height of the framing will allow the mounting bracket to be secured to the framing within the dimensions shown.
2.After wall surface is finished, secure mounting bracket to framing using dimensions shown.
DUCTEDANDNON-DUCTED
1.Assemble the flue mounting bracket, adjusting outside width as shown.
2.Carefully center the mounting bracket directly over the range hood location.
3.Secure the bracket assembly to the ceiling using (2) 4.8x38mm mounting screws and drywall anchors. Make sure the bracket is pushed into the corner, tight against the wall and centered over the hood.
FRAMING BEHIND DRYWALL
37"= bottom of hood 24" above cooktop 43"= bottom of hood 30" above cooktop
FLUE MOUNTING BRACKET
3.9 x 6 mm
FLAT HEAD BRACKET SCREWS
(270.4 mm)