Electrolux DFKTWC75GS Install filters, Ducted and NON-DUCTED Hoods, NON-DUCTED Hoods only

Page 14

14Installation

Install filters

(DUCTED AND NON-DUCTED HOODS)

1.To remove the GREASE filters, pull the metal latch tab outside and unlock the filter.

2.To install the GREASE filters, align rear filter tabs with slots in the hood. Depress the metal latch tab, push filter into position and release. Make sure filter is securely engaged after installation.

NOTE

Prior to use, remove protective film from the filter frame.

GREASE FILTERS

(NON-DUCTED HOODS ONLY)

1.To remove the CHARCOAL filter, push in on the front filter latch. Pull the filter down to disengage the rear filter tabs.

2.To install the CHARCOAL filter, align the rear filter tabs with slots in the hood. Push the filter up into place until the front latch snaps securely into the slot. Make sure the filter is securely engaged after assembly.

3.Install GREASE filters after charcoal filter is in- stalled.

 

TABS

 

NON-DUCTED

LATCH

RECIRCULATION

FILTER

Image 14
Contents Use & Care Guide Installation Instructions Page Please read and save this guide Table of contentsFinding Information Keep a record for quick referenceSafety Important Safety InstructionsIntegral Disconnecting Switch Verify package contents To reduce the risk of fire, use only metal ductwork InstallationInstall the ductwork Improper grounding can result in a risk of electric shock Wiring33-7/16 Install mounting bracket Install flue mounting bracket DUCTEDANDNON-DUCTEDPrepare the hood Ducted CONFIGURATIONNON- Ducted Configuration Install the hood At least two people will be required to mount the hoodRooms with 10-FOOT Ceilings Prior to use, remove protective film from the filter frame Install filtersDucted and NON-DUCTED Hoods NON-DUCTED Hoods onlyNon-Ducted Recirculation filters MaintenanceGrease filters Hood cleaning Operation ControlsHalogen bulbs Fuse replacement Switch OFF the Electricity SupplyWarranty Information WarrantyPage 04307838/3S