Electrolux DFKTWC75GS installation instructions Ducted CONFIGURATIONNON- Ducted Configuration

Page 11

Installation 11

DUCTED CONFIGURATIONNON- DUCTED CONFIGURATION

1.Install the discharge collar into the duct connector of the range hood. Fig. 6.

DISCHARGE

COLLAR

DUCT

CONNECTOR

FIG. 6

NOTE

The following materials must be purchased separately for non-ducted recirculation installations:

Non - Ducted Recirculation Kit, Model DFKTWC75GS. 5” diameter duct.

1.Discard discharge collar/damper supplied with the hood. Install the 5” to 6” adapter supplied with the Non-Ducted Recirculation Kit (Fig. 7).

2.Secure the plenum to the flue mounting bracket with (2) 3.9x6mm flat head screws (the screws are supplied with the Non-Ducted Recirculation Kit “DFKTWC75GS”). Fig. 8.

	5”-6”
	ADAPTER
	FIG. 7
3.9x6mm	FLUE MOUNTING
FLAT HEAD	BRACKET
SCREWS

PLENUM

FIG. 8

Image 11

Contents Use & Care Guide Installation Instructions Page Keep a record for quick reference Table of contentsFinding Information Please read and save this guideImportant Safety Instructions SafetyIntegral Disconnecting Switch Verify package contents To reduce the risk of fire, use only metal ductwork InstallationInstall the ductwork Improper grounding can result in a risk of electric shock Wiring33-7/16 DUCTEDANDNON-DUCTED Install mounting bracket Install flue mounting bracketPrepare the hood Ducted CONFIGURATIONNON- Ducted Configuration At least two people will be required to mount the hood Install the hoodRooms with 10-FOOT Ceilings NON-DUCTED Hoods only Install filtersDucted and NON-DUCTED Hoods Prior to use, remove protective film from the filter frameNon-Ducted Recirculation filters MaintenanceGrease filters Hood cleaning Controls OperationSwitch OFF the Electricity Supply Halogen bulbs Fuse replacementWarranty Warranty InformationPage 04307838/3S