Electrolux 40250 i manual Filling with Salt for the Water Softener, Fill with dishwasher salt

Page 11
Filling with Salt for the Water Softener

Operating Instructions

Filling with Salt for the Water Softener

1

Use only salt designed for dishwashers. Never fill the salt container

 

with any another type of salt (e.g. culinary salt) or dishwasher deter-

gent, as this would irreparably damage the water softener.

Prior to filling with salt, please check each time that you really do have a packet of dishwasher salt in your hand.

Fill with dishwasher salt:

Prior to using the dishwasher for the first time

If a green mark can be seen under the lid of the salt container, then there is sufficient salt. If the green mark cannot be seen, you must refill the container with salt.

3

If the water hardness in your area is less than 4 °d, you do not need to

 

use dishwasher salt. The green mark will then not be visible. The func-

 

tion of the appliance is not impaired.

 

 

0 1.

Open the door, remove the lower

 

 

 

 

 

 

 

rack.

SALE

 

 

 

 

 

 

 

 

 

 

 

 

 

2.

Undo the lid on the salt container by

SALT

 

 

 

 

SALZ

 

 

 

 

 

turning it anticlockwise.

SEL

 

 

 

 

3.When using for the first time: fill the salt container with water.

4.Place the funnel supplied on the con-Fill with dishwasher salt:

tainer opening.

Fill the container with salt through Manual backgroundManual backgroundManual background

the funnel; the capacity of the con-Manual backgroundManual background tainer is approx. 1.0-1.5 kg depend- Manual background ing on the grain size. Do not overfill

the salt container with salt.

3

The water expelled by filling the salt container with special salt runs

 

out of the salt container onto the base of the washing compartment.

This is not a cause for concern, the water will be pumped out at the start of the next wash programme.

5.Clean any salt remnants on the container opening.

6.Turn the lid clockwise to the stop, otherwise dishwasher salt will leak into the wash water. Dull glasses may result.

3

Depending on the size of the salt grains, it can take several hours for

 

the salt to dissolve in the water and the green mark to become visible

again. The setting of the water softener and thus the consumption of salt are dependent on the hardness of the local water.

11

Image 11
Contents Dishwasher User Instructions ÖKOFAVORIT 40250Dear customer Changing/Interrupting the Wash Programme CONTENTSContents Bio Wash Programmes and Concentrated DetergentsInstallation and Connection Instructions General Safety 1 Safety InstructionsInstallation, Connection and Placing into Operation Child SafetyCorrect Use Disposal of Old Appliances 2 Disposal2 Economical and Ecological Dishwashing Disposing of the Packaging MaterialContainer for Detergent Appliance Features and Control PanelRubber Seal for Connecting the Water Feed to the Upper Spray Arm Spray Arms Water Hardness SwitchControl Panel Prior to using for the first timeAdjust the Water Softener Fill with dishwasher salt Filling with Salt for the Water SoftenerFill with rinse aid Filling with Rinse AidAdjusting Rinse Aid Dosing Loading Cutlery and Dishes In Daily UseLoading Cutlery 2. Fold the plate insert to the left Loading Pans, Frying Pans and Large PlatesLoad large and heavily soiled dishes in the lower rack 0 1. Slightly lift the right plate insertLay or hang wine, champagne, and Loading Cups, Glasses and Coffee Servicesoffset from each other and water can reach all items The cup racks can be folded up out of the way for tall itemsFill with Detergent Filling with DetergentWeak alkaline concentrated detergents with natural enzymes Bio Wash Programmes and Concentrated DetergentsDetergent Recommendations Conventional, alkaline detergents with caustic componentsProgramme Sequence Selecting the Wash Programme Programme TableChoose the most suitable wash programme with the aid of this table NORMALChanging the wash programme Starting the Wash ProgrammeChanging/Interrupting the Wash Programme washer Care and CleaningSwitching Off the Dishwasher Emptying the Dishwasherbase of the washing compartment Cleaning the FilterThe filters should be checked and The dishwasher filter system comWhat to do, if there are problems with the operation of the dish- washerThere are dried water drops on the glasses and dishes the wash result is unsatisfactoryThe dishes are still dirty The dishes are wet and dull89/336/EWG dated 03. 05 Technical DataThis appliance conforms with the following EU Directives 73/23/EWG dated 19. 02. 1973 - Low Voltage DirectiveExample Loading Arrangement Upper rack lower and upper positions Notes for Test InstitutesBottom rack with cutlery basket Installing the Dishwasher INSTALLATION AND CONNECTION INSTRUCTIONSFree-Standing Appliances Dishwashers That Can Be IntegratedBuilt-In Dishwasher Clamp thickness max. 4 mm 3 The plinth on free-standing appliances is not adjustableDecor panel dimensions Height 590 mm Width 581 mm work surface must be re-mountedConnect the inlet hose Connecting the DishwasherWater Connection Permitted water pressureSink outlet connection Water drainDrain hose Extension hosesappliance is automatically pumped out Leak Prevention SystemWARNING - This appliance must be earthed Electrical ConnectionChanging a fuse ried out by a qualified electrician or competent personMains ConnectionsTwo 45 or Straight Connections Water inletGuarantee Conditions GUARANTEE CONDITIONSPage Page Customer Care SERVICE & SPARE PARTS08705 929 Copyright by AEG 822 945 464 - 00 AEG Hausgeräte GmbH Postfach D-90327 Nürnberg