Electrolux 40250 i manual Two 45 or Straight Connections, Water inlet, Mains, cable

Page 35

Installation and Connection Instructions

Connections

The water inlet and drain hoses, as well as the mains cable must be connected beside the dishwasher as there is insufficient space behind the appliance.

The plumbing and electrical installation example given below can only be regarded as a recommendation.

Two 45° or Straight Connections,
Outer ø 19 mm, Length 30 mm	Double tap Water drain	Water inlet

Water	Mains	Water	Mains socket	Mains
inlet	cable	drain		cable

Image 35

Contents Dishwasher User Instructions ÖKOFAVORIT 40250Dear customer Changing/Interrupting the Wash Programme CONTENTSContents Bio Wash Programmes and Concentrated DetergentsInstallation and Connection Instructions General Safety 1 Safety InstructionsInstallation, Connection and Placing into Operation Child SafetyCorrect Use Disposal of Old Appliances 2 Disposal2 Economical and Ecological Dishwashing Disposing of the Packaging MaterialContainer for Detergent Appliance Features and Control PanelRubber Seal for Connecting the Water Feed to the Upper Spray Arm Spray Arms Water Hardness SwitchControl Panel Prior to using for the first timeAdjust the Water Softener Fill with dishwasher salt Filling with Salt for the Water SoftenerFill with rinse aid Filling with Rinse AidAdjusting Rinse Aid Dosing Loading Cutlery and Dishes In Daily UseLoading Cutlery 2. Fold the plate insert to the left Loading Pans, Frying Pans and Large PlatesLoad large and heavily soiled dishes in the lower rack 0 1. Slightly lift the right plate insertLay or hang wine, champagne, and Loading Cups, Glasses and Coffee Servicesoffset from each other and water can reach all items The cup racks can be folded up out of the way for tall itemsFill with Detergent Filling with DetergentWeak alkaline concentrated detergents with natural enzymes Bio Wash Programmes and Concentrated DetergentsDetergent Recommendations Conventional, alkaline detergents with caustic componentsProgramme Sequence Selecting the Wash Programme Programme TableChoose the most suitable wash programme with the aid of this table NORMALChanging the wash programme Starting the Wash ProgrammeChanging/Interrupting the Wash Programme washer Care and CleaningSwitching Off the Dishwasher Emptying the Dishwasherbase of the washing compartment Cleaning the FilterThe filters should be checked and The dishwasher filter system comWhat to do, if there are problems with the operation of the dish- washerThere are dried water drops on the glasses and dishes the wash result is unsatisfactoryThe dishes are still dirty The dishes are wet and dull89/336/EWG dated 03. 05 Technical DataThis appliance conforms with the following EU Directives 73/23/EWG dated 19. 02. 1973 - Low Voltage DirectiveExample Loading Arrangement Upper rack lower and upper positions Notes for Test InstitutesBottom rack with cutlery basket Installing the Dishwasher INSTALLATION AND CONNECTION INSTRUCTIONSFree-Standing Appliances Dishwashers That Can Be IntegratedBuilt-In Dishwasher Clamp thickness max. 4 mm 3 The plinth on free-standing appliances is not adjustableDecor panel dimensions Height 590 mm Width 581 mm work surface must be re-mountedConnect the inlet hose Connecting the DishwasherWater Connection Permitted water pressureSink outlet connection Water drainDrain hose Extension hosesappliance is automatically pumped out Leak Prevention SystemWARNING - This appliance must be earthed Electrical ConnectionChanging a fuse ried out by a qualified electrician or competent personMains ConnectionsTwo 45 or Straight Connections Water inletGuarantee Conditions GUARANTEE CONDITIONSPage Page Customer Care SERVICE & SPARE PARTS08705 929 Copyright by AEG 822 945 464 - 00 AEG Hausgeräte GmbH Postfach D-90327 Nürnberg

Connections

Two 45° or Straight Connections,

Water inlet

Mains

cable