Electrolux 40250 i manual Correct Use

Page 6
Correct Use

Operating Instructions

Never place the dishwasher in operation if the mains cable, water inlet or drain hose is damaged; or the control panel, work top or plinth area is damaged such that the inside of the appliance is freely accessible.

If the mains lead is damaged, or is to be replaced for a longer lead, the cable (obtainable from AEG Service Force) must be replaced by a service engineer authorised by AEG.

Never unplug the appliance by pulling on the cable, always pull the plug.

Additions or modifications to the dishwasher are not permitted for safety reasons.

Ensure that the door of the dishwasher is always closed when it is not being loaded or unloaded. In this way you will avoid anybody tripping over the open door and hurting themselves.

Long bladed knives stored in an upright position are a potential haz- ard.

Long and/or sharp items of cutlery such as carving knives must be positioned horizontally in the upper basket.

When finished loading or unloading, close the door as an open door can be a hazard.

Correct Use

Only wash household dishes using the dishwasher. If the appliance is used for other purposes, or is used incorrectly, the manufacturer can- not accept any liability for any damage caused.

Only use detergents specifically designed for use in domestic dish- washers.

Do not put any solvents in the dishwasher. There is a risk of an explo- sion!

The anti-flood system provides dependable protection against dam- age due to leaks. For this system to function correctly, the following preconditions must be met:

The appliance must remain connected to the mains even when it is switched off.

The dishwasher must be correctly installed.

Always shut off the water supply at the tap when the dishwasher is not to be used for longer periods, e.g. when you are away on holiday.

Do not sit or stand on the open door, the appliance may tip over.

6

Image 6
Contents ÖKOFAVORIT 40250 Dishwasher User InstructionsDear customer Bio Wash Programmes and Concentrated Detergents CONTENTSContents Changing/Interrupting the Wash ProgrammeInstallation and Connection Instructions Child Safety 1 Safety InstructionsInstallation, Connection and Placing into Operation General SafetyCorrect Use Disposing of the Packaging Material 2 Disposal2 Economical and Ecological Dishwashing Disposal of Old AppliancesSpray Arms Water Hardness Switch Appliance Features and Control PanelRubber Seal for Connecting the Water Feed to the Upper Spray Arm Container for DetergentPrior to using for the first time Control PanelAdjust the Water Softener Filling with Salt for the Water Softener Fill with dishwasher saltFilling with Rinse Aid Fill with rinse aidAdjusting Rinse Aid Dosing In Daily Use Loading Cutlery and DishesLoading Cutlery 0 1. Slightly lift the right plate insert Loading Pans, Frying Pans and Large PlatesLoad large and heavily soiled dishes in the lower rack 2. Fold the plate insert to the leftThe cup racks can be folded up out of the way for tall items Loading Cups, Glasses and Coffee Servicesoffset from each other and water can reach all items Lay or hang wine, champagne, andFilling with Detergent Fill with DetergentConventional, alkaline detergents with caustic components Bio Wash Programmes and Concentrated DetergentsDetergent Recommendations Weak alkaline concentrated detergents with natural enzymesNORMAL Selecting the Wash Programme Programme TableChoose the most suitable wash programme with the aid of this table Programme SequenceStarting the Wash Programme Changing/Interrupting the Wash ProgrammeChanging the wash programme Emptying the Dishwasher Care and CleaningSwitching Off the Dishwasher washerThe dishwasher filter system com Cleaning the FilterThe filters should be checked and base of the washing compartmentthere are problems with the operation of the dish- washer What to do, ifThe dishes are wet and dull the wash result is unsatisfactoryThe dishes are still dirty There are dried water drops on the glasses and dishes73/23/EWG dated 19. 02. 1973 - Low Voltage Directive Technical DataThis appliance conforms with the following EU Directives 89/336/EWG dated 03. 05Notes for Test Institutes Bottom rack with cutlery basketExample Loading Arrangement Upper rack lower and upper positions INSTALLATION AND CONNECTION INSTRUCTIONS Installing the DishwasherDishwashers That Can Be Integrated Built-In DishwasherFree-Standing Appliances work surface must be re-mounted 3 The plinth on free-standing appliances is not adjustableDecor panel dimensions Height 590 mm Width 581 mm Clamp thickness max. 4 mmPermitted water pressure Connecting the DishwasherWater Connection Connect the inlet hoseExtension hoses Water drainDrain hose Sink outlet connectionLeak Prevention System appliance is automatically pumped outried out by a qualified electrician or competent person Electrical ConnectionChanging a fuse WARNING - This appliance must be earthedWater inlet ConnectionsTwo 45 or Straight Connections MainsGUARANTEE CONDITIONS Guarantee ConditionsPage Page SERVICE & SPARE PARTS 08705 929Customer Care AEG Hausgeräte GmbH Postfach D-90327 Nürnberg Copyright by AEG 822 945 464 - 00